• 대한두개안면성형외과학회지
• /
• 제11권1호
• /
• pp.45-48
• /
• 2010

Purpose: After surgical interventions of mandible fractures, facial asymmetry can be occurred, and it leads to serious problems for patients. This can be solved by mandible angle ostectomy. Methods: A 19-year-old male underwent percutaneous surgical intervention for left mandibular angle and right parasymphyseal fractures 3.5 years ago. The left angle was protruded compared to the other side. Using a percutaneous approach, $4.5{\times}1cm$ sized piece of mandible angle was sawed off. For the right angle, intraoral approach was performed for angle ostectomy, and the angle was sawed off by a size of $4{\times}1cm$, using a pattern based on the piece from the left side. Results: After surgery, no complications such as subcondylar fractures, refractures, insufficient corrections, secondary angle formations, hematomas, and transient nerve palsies were seen, and symmetric correction of mandible angles were done. Conclusion: In facial asymmetries due to mandibular fractures, mandible ostectomy could be a solution. Using the bone section from the contralateral side, measurement of the amount of bone sawed off was possible, and via percutaneous approach on the previously operated site with simultaneous scar revision, and intraoral approach for the contralateral side, cosmetically satisfactory result was obtained.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제18권3호
• /
• pp.470-487
• /
• 1996

The purpose of this study was to investigate the dynamic response of the mandible to impact and provide insight into the fracture mechanism of the mandible, by 3-dimensional finite element method. The finite element model of the mandible was developed and calculated using NASTRAN/XL (MSC co. U.S.A.) and the linear dynamic transient analysis was performed according to the impulsive force direction, force type and impulse time to the mandible. At first, the load was applied on the mandibular symphysis, body, angle and subcondylar area in the horizontal mandibular plane and the computed stress-time histories at 14 locations of the mandible were obtained. Secondly, the impulsive force was directed to the symphyseal area with changing the force magnitude and impulse time, and calculated the node displacement at 8 locations of mandible. The conclusions from from this study were as follows. 1. The appearance of impulsive energy transmission was different to the direction of impulse to the mandible. 2. The impulsive stress and deformation were larger in lingual or medial side than buccal or lateral in the mandible. 3. The velocity, appearance of energy transmission and the fracture pattern in mandible were affected rather impulse time than force. 4. The horizontal impact to the one side of mandible did not have effect on the stress and displacement of contralateral mandible. From the above results, fracture pattern in symphysis can be showed as simple or comminuted, multiple or associated in body and angle and solitary in subcondyle area.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제32권3호
• /
• pp.207-217
• /
• 2010

The purpose of this study was to evaluate the effects of the stress distribution and displacement in mandible according to treatment modalities of mandibular angle fractures, using a three dimensional finite element analysis. A mechanical model of an edentulous mandible was generated from 3D scan. A 100-N axial load and four masticatory muscular supporting system were applied to this model. According to the number, location and materials of titanium and biodegradable polymer plates, the experimental groups were divided into five types. Type I had a single titanium plate in the superior border of mandibular angle, type II had two titanium plates in the superior tension border and in the inferior compression border of mandibular angle, type III had a single titanium plate in the ventral area of mandibular angle, type IV had a single biodegradable polymer plate in the superior border of mandibular angle, type V had a single biodegradable polymer plate in the ventral area of mandibular angle. The results obtained from this study were follows: 1. Stress was concentrated on the condylar neck of the fractured side except Type III. 2. The values of von-Mises stress of the screws were the highest in the just-posterior screw of the fracture line, and in the just-anterior screw of Type III. 3. The displacement of mandible in Type III was 0.04 mm, and in Type I, II, IV, and V were 0.10 mm. 4. The plates were the most stable in the ventral area of mandibular angle (Type III, V). In conclusion, the ventral area of mandibular angle is the most stable location in the fixation of mandibular angle fractures, and the just- posterior and/or the just-anterior screws of the fracture line must be longer than the other, and surgeons have to fix accurately these screws, and the biodegradable polymer plate also was suitable for the treatment of mandible angle fracture.

• 치과방사선
• /
• 제22권1호
• /
• pp.7-22
• /
• 1992

The stress distributions on a human mandible for 18 load cases under two different boundary conditions (mouth open and closed), using the three dimensional finite element modeling were studied. Also, the expected fracture loads for each load cases were calculated by using the Von-Mises yield criterion. The model of a mandible with all teeth was composed of 2402 hexahedron elements and 3698 nodes. CAD techniques were used to analyze the 3-dimensional results. The conclusions of this study were as follows: 1. In the mouth open state, the maximum stress occured at the condyle neck; when the lateral load was exerted, the maximum stress occured at the load side condyle. 2. In the mouth closed state, when the loads were exerted on the mandibular body and chin, the maximum stress occured at the loaded area, and when the loads were exerted on the angle and ramus, the maximum stress occured at the condyle neck. 3. The expected fracture loads in each load case were calculated using the Von-Mises yield criterion, and it was confirmed that the mandible in the mouth open state was more easily fractured than that in the mouth closed state, and the expected fracture loads are lesser in the cases that load direction is parallel at mandibular plane than 45°. 4. The magnitudes of the expected fracture loads increased in the order of angle, ramus, body and chin in case of the mouth closed state, while chin, body, angle and ramus in case of the mouth open state. 5. The Von-Mises stress concentration regions analyzed by F.E.M. corresponded well with the results of clinical studies.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제37권
• /
• pp.26.1-26.4
• /
• 2015

We experienced a patient of subcondylar fracture who had a squared contour of the lower face with prominent angle of the mandible and masseter hypertrophy. Our patient was increasingly seeking esthetic improvement of the lower third of the face. But she did not want multi-stage operations. Thus, we decided and performed a one-stage mandibular angle ostectomy with fracture management. We have a stable and esthetic result simultaneously despite fractures of the fixation plates during follow-up period, so report a case.

• 대한치과의사협회지
• /
• 제50권9호
• /
• pp.566-573
• /
• 2012

Purpose : This study evaluated the impact of the presence and aspect of mandibular third molars to the mandible angle fracture or condyle fractures in Korean. Materials and Methods : A retrospective study was designed for patients attending the division of Oral and Maxillofacial Surgery, Kang-dong sacred heart hospital for treatment of mandibular fracture from January 2006 to September 2010. The primary variable was the presence of mandibular third molar and the secondary variable was the aspects of third molar impaction. Mandibular third molars were classified by the impaction depth and the available space as Pell & Gregory system. Outcome variables were the presence of mandibular angle fracture or condyle fracture. Also the source of trauma, age, sex were studied. Hospital charts, radiographs were used for study. Statistic analysis was done with descriptive statistics, the X2-test, linear-by-linear association. P value under 0.05 was considered significant statistically. Results : The number of involved patients was 86. The ratio of male to female patients was about 9:1 for angle fracture and 7:3 for condyle fracture. The most common source of trauma was assault for angle fracture and fall down for condyle fracture. The presence of mandibular third molar increased frequency of angle fracture and decreased condyle fracture with larger impaction depth. But available space of mandibular third molar did not show high association with angle or condyle fractures. Conclusion: Preventive extraction of mandibular third molar is recommended for patients with high risk of angle fracture. Male patients at their third decade or martial artists, police officer could be the case. But it is not recommended for patients with low risk of angle fracture and high risk of condyle fracture relatively. Elder female patients without any symptom on their third molar could be the case.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제40권1호
• /
• pp.21-26
• /
• 2014

Objectives: The purpose of this article is to analyze the incidence, demographic distribution, type, and etiology of mandible fractures that were treated by the Department of Oral and Maxillofacial Surgery in Kyung Hee University Dental Hospital from January 2002 to December 2012. Materials and Methods: This was a descriptive and analytic retrospective study that evaluated 735 patients that were treated for mandible fracture. Results: This study included 1,172 fractures in 735 patients. The ratio of male to female patients was 5.45 : 1; the maximum value was in patients between 20 and 29 years (38.1%) and the minimum in patients over 70 years old. The monthly distribution of facial fractures peaked in the fall and was lower during winter. No specific correlation was identified based on the annual fracture distribution. Among the 735 fracture patients, 1.59 fracture lines were observed per patient. The most frequent site was the symphysis, which accounted for a total of 431 fractures, followed by the angle (348), condyle (279), and body (95). The symphysis with angle was the most common site identified in combination with fracture and accounted for 22.4%, followed by symphysis with condyle (19.8%). The angle was the most frequent site of single fractures (20.8%). The major cause of injury was accidental trauma (43.4%), which was followed by other causes such as violence (33.9%), sports-related accidents (10.5%), and traffic accidents (10.1%). Fracture incidents correlated with alcohol consumption were reported between 10.0%-26.9% annually. Conclusion: Although mandible fracture pattern is similar to the previous researches, there is some changes in the etiologic factors.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제30권6호
• /
• pp.530-535
• /
• 2004

Objectives. The purpose of this study was to evaluate mandibular third molars as risk factors for angle fracture in a patient sample with fractured mandible. Materials and methods. The medical records and panoramic radiographs of 107 patients with mandibular fractures were examined. The presence and absence and degree of impaction of the lower third molar were assessed for each patient and related to the occurrence of fracture of the mandibular angle. Data were also collected for age, sex and mechanism of injury. Data were analyzed by a chisquare statistics and Student t test. Result. The incidence of mandibular angle fracture was found to be significantly greater when a lower third molar was present(p <0.05) especially at class III state.(p < 0.05)(by Pell & Gregory system) Of the 78 patients with a lower third molar, 46(58.97%) had angle fractures. Of the 29 without a lower third molar, 24(82.76%) had not angle fractures. Conclusion. The result of this study showed that the mandibular angle that have a lower third molar is more susceptible to fracture when exposed to an impact than an angle without an lower third molar.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• 제32권3호
• /
• pp.222-225
• /
• 2006

The treatment objective of mandibular fracture is a return to normal function. According to Champy, a rigid fixation of mandibular angle fracture is performed by using 4 or 6 holes titanium miniplates on the external oblique ridge of mandible. However, the limitations of metal plate such as hypersensitivity, interference with the cranio-facial growth of growing child, secondary bone resorption around the plate, foreign body reaction, declination of primary callus formation, and bone atrophy due to the lack of normal stress reaction of the bone have been reported. Recently, biodegradable miniplate has been introduced and used as an alternative to the metal plate despite its lower strength than that of the titanium plate and the side effect caused by the resorption in the body. In this study, 61 patients diagnosed as mandibular angle fracture and treated from Jan. 1998 to Dec. 2004 in our department have been reviewed. Metal plate fixation was used in 50 patients and biodegradable plate fixation in 11 patients on the external oblique ridge around the fractured mandibular angle according to the principle of monocortical osteosynthesis by Champy. We compared the incidence of side effects and the degree of bony union at the mandibular inferior border in two different fixation methods. In conclusion, we have found that one miniplate regardless of matter could provide enough strength to grasp bony fragments of the tension site and compress the inferior border of mandible without any complications.

• 대한두개안면성형외과학회지
• /
• 제20권6호
• /
• pp.376-381
• /
• 2019

Background: This study was conducted to determine the relationship between third molar (M3) and mandibular fracture. Methods: Patients with unilateral mandibular angle or condyle fractures between 2008 and 2018 were evaluated retrospectively. Medical records were reviewed regarding the location of fractures, and panoramic radiographs were reviewed to discern the presence and position of ipsilateral mandibular third molars (M3). We measured the bony area of the mandibular angle (area A) and the bony area occupied by the M3 (area B) to calculate the true mandibular angle bony area ratio (area A-B/area A×100). Results: The study consisted of 129 patients, of which 60 (46.5%) had angle fractures and 69 (53.5%) had condyle fractures. The risk of angle fracture was higher in the presence of M3 (odds ratio [OR], 2.2; p< 0.05) and the risk of condyle fracture was lower in the presence of M3 (OR, 0.45; p< 0.05), than in the absence of M3. The risk of angle fracture was higher in the presence of an impacted M3 (OR, 0.3; p< 0.001) and the risk of condyle fracture was lower in the presence of an impacted M3 (OR, 3.32; p< 0.001), than in the presence of a fully erupted M3. True mandibular angle bony area ratio was significantly lower in the angle fractures than in the condyle fractures (p= 0.003). Conclusion: Angle fractures had significantly lower true mandibular angle bony area ratios than condyle fractures. True mandibular angle bony area ratio, a simple and inexpensive method, could be an option to predict the mandibular fracture patterns.