• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.646-651
• /
• 2017

The purpose of this study is to design a proper evaluation method for analysing the safety management efficiency of coastal ship companies, and to verify these evaluation standards by applying them to a representative company. For this purpose, 5 evaluation items and 14 specific sub-evaluation elements have been determined after collecting practical opinions from a group of expert, which consisted of safety managers in passenger ship companies, public servants as a ship inspector, passenger ship operations managers, etc. Next, the safety management levels of 44 coastal passenger ship companies were evaluated using these standards. Finally, the validity of the proposed evaluation method was verified through comparison analysis between the evaluation results and the ratio of major marine accidents. It was determined that companies with low evaluation levels were saw more major marine accidents than other coastal passenger ship companies, spurring greater interest in safety management. In conclusion, evaluation standards allow coastal passenger ship companies to voluntarily assess their safety management level were established. The result can also be applied to analyse the operation efficiency of coastal passenger ship companies.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.105-124
• /
• 2018

The purpose of this study is to identify human factors that directly or indirectly cause ship accidents and to suggest implications based on the derived human factors. In particular, we conducted a survey on the basis of the human factors derived from the literature survey and interviews, and applied the revised importance-performance analysis (IPA) to develop implications from a comparison of two groups: seafarers and shipping operations managers. Data were collected from 159 practitioners in the Korean shipping industry. The analysis structure consisted of five major factors with 20 components, including unique factors related to ship and shipping management companies, personal competence, in-vessel organization, and personnel's health, as well as social factors. The result of the IPA analysis indicates that in-vessel organization is the most urgent and major factor for improvement. Some differences exist in the components that should be improved between the two groups. For the seafarer group, an increase in unskilled onboard crew affected sustainable safety activities, thus implying an area of preferential improvement regarding the in-vessel organization factor. However, for the shipping operations managers group, the difference in recognizing safety standards among the crew members on board and the ability to communicate with other crew members should be improved first relative to in-vessel organization factors. The personnel's health factor was identified to be of low importance in both groups. Finally, the importance of improving the safety consciousness level according to the safety education and training implementation for seafarers on board was different for the two groups.

• Journal of the Korea Safety Management & Science
• /
• v.14 no.3
• /
• pp.135-141
• /
• 2012

This study was conducted to evaluate the characteristics of exposure to asbestos for ship repair workers in Korea by a systematic review. The number of articles studying asbestos exposure levels from ship repair workplaces was found to be 4. All asbestos concentration reported as either geometric mean and geometric standard deviation or ranges were transformed to arithmetic mean to estimate exposure level. In addition, weighted arithmetic means(WAMs) were calculated by weighing of the different number of samples. The WAM concentrations were 2.746 f/cc during asbestos dismantling work, 0.034 f/cc before asbestos dismantling work and 0.065 f/cc after working respectively. The maximum airborne concentration of asbestos during asbestos removal work was 7.02 f/cc which was 70 times higher than the occupational exposure limit of Korea, 0.1 f/cc. This study recommends that retrospective exposure to asbestos based on various ship types and operations should be assessed.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.519-526
• /
• 1994

In the large and multifunctional engineering system, the heterogeneous computer system situation is inevitable. Accordingly a lot of integration efforts are being made to comply with the industrial requirement of productivity. In this paper, a practical concept of integration is introduced through the development of a prototype system for ship outfitting design which is a typical example of large/multi-functional application system. On the development of the prototype system, three points are considered as a practical concept-which are integration of database, integration of application programs, and system-user interface. The relation model based commercial database management system(RDBMS) is used to build the project integrated database, and the graphical user interface tool(OSF/Motif) on X-window system is used for the integration of application programs and the user interface.

• Korean Management Science Review
• /
• v.30 no.3
• /
• pp.17-31
• /
• 2013

The purpose of this paper is to illustrate the importance of identifying and considering 'purchase dependence' when purchase of an item is dependent on availability of other items demanded in the same order. This paper is the first study to develop an inventory model for purchase-dependent inventory systems. Through simulation experiments, we demonstrate that the developed inventory model incurs less inventory operations cost than other inventory models that ignore purchase dependence. For empirical validation of the developed inventory model, the actual inventory data at the Hyundai Engine Europe Service Center is used. We explain the process of identifying purchase dependencies among items through a data mining technique. The empirical study results in similar results to the simulation experiment, demonstrating that the developed inventory model is applicable to real situations.

• Journal of Navigation and Port Research
• /
• v.39 no.6
• /
• pp.465-472
• /
• 2015

SEEMP (Ship Energy Efficiency Management Plan) guidelines for a ship's GHG reduction include a machinery modification of hull, an installation of energy efficiency enhanced attachment in hardware methods. It is also possible to bring a ship energy efficiency improvement by fuel-efficient operations or in other software methods. Hardware modification or installation on ship can bring financial burdens to a ship company compared to its improvement expectation. On the other hand, Software based energy-saving technology can be applicable on various ship types, and it is also expected high efficiency of ship energy use compared to hardware based technology in perspective of the investment costs and efficiency. In this paper, it is described that the ship handling simulator based evaluation was carried out using representative ship model of bulk, container and VLCC. Simulation environments were separated into 6 conditions according to the sea-state and weather condition, and the operation results were compared with those before and after energy saving system applied The container ship showed the largest FOC save rate after energy saving system applied although the others also showed energy save rate after using the system.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.21 no.3
• /
• pp.1-10
• /
• 1996

In this paper, the problem of simultaneously allocating servers and loadings of stations in a class of manufacturing systems modelled as network of queues is considered. The throughput function of the closed network of queues is demonstrated as a Schur convex function of server allocation, that is, increasing the server allocation vector under majorization increases the performance in the ship in terms of the throughput. It also reduces the congestion in the open network of queues in terms of reducing the total number of jobs in the sense of likelihood ratio ordering. These are the extentions of the numerical results of Green and Guha (1995) in the service system with independent M/M/c systems to the network of queues. The results can be used to support production planning in certain manufacturing systems.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2006.11a
• /
• pp.57-59
• /
• 2006

The purpose of search problem is to maximize the probability of target detection as limited search capability. Especially, as elapsing of time at a point of time of initial information received the target detection rate for searching an expected location due to a moving target such that wrecked ship or submarine decrease in these problems. The algorithm of search problem to a moving target having similar property of above targets should solve the search route as quickly as possible. In existing studies, they have a limit of applying in practice due to increasing computation time required by problem size (i.e., number of search area, search time). In this study, we provide that it takes more reasonable computation time than preceding studies even though extending a problem size practically using an approximate computation of probability.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2004.10a
• /
• pp.245-249
• /
• 2004

This paper deals with two most important problems, from both practical and theoretical standpoints, arising when building the ships in docks. Such docks have become core components of modern ship construction. One problem is to minimize the number of building docks in the shipyard, while the other is to keep the usage rate of resources fed into dock as constant as possible. In this paper the combined problem is formulated as a single-integer programming model. The LP-relaxation of this model is solved by column-generation techniques. The results of an experimental evaluation show that the lower bounds are tight. Practical applications of this formulation are also discussed.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.33 no.1
• /
• pp.35-49
• /
• 2008

To load a container in a yard block onto a ship, a Transfer Crane (TC) moves to a target yard bay, then its hoist picks up a selected container and loads it onto a waiting Yard Truck (YT). An optimal routing problem of Transfer Crane is a decision problem which determines a given TC's the visiting sequence of yard-bays and the number of containers to transfer from each yard-bay. The objective is to minimize the travel time of the TC between yard-bays and setup time for the TC in a visiting yard. In this paper, we shows that the problem is NP-complete, and suggests a new formulation for it. Using the new formulation for the problem, we investigate some characteristics of solutions, a lower and upper bounds for it. Moreover, our lower and upper bound is very efficient to applying some instances suggested in a previous work.