• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8B
• /
• pp.637-646
• /
• 2012

Recently, Wireless Sensor Networks (WSNs) are used in many applications. When sensor nodes are deployed on special areas, where humans have any difficulties to get in, the nodes form network topology themselves. By using the sensor nodes, users are able to obtain environmental information. Due to the lack of the battery capability, sensor nodes should be efficiently managed with energy consumption in WSNs. In specific applications (e.g. in intrusion detections), intruders tend to occur unexpectedly. For the energy efficiency in the applications, an appropriate algorithm is strongly required. In this paper, we propose tree-based routing algorithm for the specific applications, which based on the intrusion detection. In addition, In order to decrease traffic density, the proposed algorithm provides enhanced method considering link cost and load balance, and it establishes efficient links amongst the sensor nodes. Simultaneously, by using the proposed scheme, parent and child nodes are (re-)defined. Furthermore, efficient routing table management facilitates to improve energy efficiency especially in the limited power source. In order to apply a realistic military environment, in this paper, we design three scenarios according to an intruder's moving direction; (1) the intruder is passing along a path where sensor nodes have been already deployed. (2) the intruders are crossing the path. (3) the intruders, who are moving as (1)'s scenario, are certainly deviating from the middle of the path. In conclusion, through the simulation results, we obtain the performance results in terms of latency and energy consumption, and analyze them. Finally, we validate our algorithm is highly able to adapt on such the application environments.

• The KIPS Transactions:PartC
• /
• v.16C no.1
• /
• pp.65-72
• /
• 2009

Due to the popularity of mobile devices and advances in wireless communication technologies, a mobile ad hoc network has received a lot of attention. In the existing data replication management research, the use of a replica has been shown to be an efficient technique for improving data accessibility. However, to use a replica in ad hoc networks, the data consistency between the original data and the replica should be guaranteed. In the traditional research, a mobile node should check an original data whether the data is updated or not. However, It may be costly or sometimes impossible to check the original data. In the case of the time constraint applications, the checking cost can cause more serious problem. In this paper, we propose the time-guarantee based cache invalidation schemes for time constraint applications and the threshold based compensation method to enhance the time-guarantee based scheme. The proposed schemes can remove the "rollback" problem. Simulation results show that our schemes outperform the previous ones in terms of access time with little loss of data currency.

• Spatial Information Research
• /
• v.9 no.2
• /
• pp.325-340
• /
• 2001

This research is to construct more useful Geo-spatial data by building spatial data to three dimensional and utilize the database effectively for development of application, maintenance and management program, and application technology, which is on going based on “Haeundae three dimensional database construction project”. Furthermore, the acquisition of geographic information data and the technological improvement of effective construction would be the important factors to judge the qualitative reputation of GIS. Above all, studies to create accurate data and overcome the error limitation are much more important than any other thing. Final form of Spatial Data to materialize efficient GIS(Geographic Information System) must be three dimensional spatial data which has attribute data, actual concept and numerical value of real world. In connection to that, development is on the move to improve building technique of useful spatial data and digitalize the entire country in cryberspace. $\ulcorner the cyber country lrcorner$is designed to mange the entire country systematically. This simulation would be able to cover administration of government institution, public service, corporate business and even the public life in the cyeberspace though the computer. Materialization of efficient GIS and establishment of condition as technically strong nation through the early realization of $\ulcorner the cyber country lrcorner$will provide a great opportunity to open up the global market with exportation of advanced technology.

• Journal of Digital Convergence
• /
• v.14 no.7
• /
• pp.1-10
• /
• 2016

The study researches regarding changing in reading and auditory perception ability after intervening dyslexia high-risk group of middle and high school students for improvement on auditory processing of neurological factors, and then aims to make a systematic intervention program for dyslexia students in verifying efficacy. The target of study is dyslexia high-risk group of 168 middle and high school students after a preliminary screening test in Childcare Facilities which are vulnerable social group in Gyeonggi province. They are tested deeply by reading and auditory perception ability, and then 24 students are selected. They are tested 20 times by auditory perception simulation and fluent reading train in TOMATIS Method for improving auditory system which transmits language information, and then are taken by post tests. In conclusion intervention efficacy is sure because reading, understanding, and auditory processing ability are in significant change of statistical analysis after preliminary and post tests. It is an important achievement to show necessity of neurological science access in diagnosis and intervention method of dyslexia through the research.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.3 s.39
• /
• pp.303-311
• /
• 1992

It is very important to estimate the future medical care expenditure, because medical care expenditure escalation is a big problem not only in the health industry but also in the Korean economy today. This study was designed to project the medical care expenditure in view of population age change. The data of this study were the population projection data based on National Census Data(1990) of the National Statistical Office and the Statistical Reports of the Korea Medical Insurance Corporation. The future medical care expenditure was eatimated by the regression model and the optional simulation model. The significant results are as follows : 1. The future medical care expenditure will be 3,963 billion Won in the year 2000, 4,483 billion Won in 2010, and 4,826 billion Won in 2020, based on the 1990 market price considering only the population age change. 2. The proportion of the total medical care expenditure in the elderly over 65 will be 10.4% in 2000, 13.5% in 2010, and 16.9% in 2020. 3. The future medical care expenditure will be 4,306 billion Won in the year 2000, 5,101 billion Won in 2010, and 5,699 billion Won in 2020 based on the 1990 market price considering the age structure change and the change of the case-cost estimated by the regression model. 4. When we consider the age-structure change and inflation compared with the preceding year, the future medical care expenditurein 2020 will be 21 trillion Won based on a 5% inflation rate, 42 trillion Won based on a 7.5% inflation rate, and 84 trillion Won based on a 10% inflation rate. Consideration of the aged(65 years old and over) will be essential to understand the acute increase of medical care expenditure due to changes in age structure of the population. Therefore, alternative policies and programs for the caring of the aged should be further studied.

• Korean Chemical Engineering Research
• /
• v.56 no.1
• /
• pp.133-138
• /
• 2018

Safety management has become even more important because of the safety and environmental issues that have arisen since the 2000s. However, the safety study requires many empirical data, so there are many limitations. In the case of pipe safety, simulation programs exist, but it is difficult to get data about the pipe internal erosion of the pipe. In this study, the erosion rate of the pipe elbow was simulated using computational fluid dynamics (CFD). Also, the failure period of the pipe was calculated by the limit state function using erosion rate. In the case of CFD pipe, a sample which is actually operated in Yeosu industrial complex was used, and the geometry and mesh formation were rationalized in terms of typical fluid dynamics simulations. Using the Discrete Phase Model (DPM) and the corrosion model, the erosion rate ($3.09227mm{\cdot}yr^{-1}$) was obtained from CFD simulations. As a result of applying the erosion rate to the limit state function, we obtained the pipe failure period value, 14.2 years to trigger a leak and 28.2 years to trigger a burst. Through these processes, we concluded that pipe erosion is one of the major failure modes. In addition to the results, this study has significance for suggesting the methodology of the pipe safety study.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.96-107
• /
• 2015

VANET technologies provide real-time traffic information for mitigating traffic jam and preventing traffic accidents, as well as in-vehicle infotainment service through Telematics/Intelligent Transportation System (ITS). Due to the rapid increasement of various requirements, the vehicle communication with a limited resource and the fixed frame architecture of the conventional techniques is limited to provide an efficient communication service. Therefore, a new flexible operation depending on the surrounding situation information is required that needs an adaptive design of the network architecture and protocol for efficiently predicting, distributing and sharing the context-aware information. In this paper, Vehicle-to-Infrastructure (V2I) based on communication between vehicle and a Road Side Units (RSU) and Vehicle-to-Vehicle (V2V) based on communication between vehicles are effectively combined in a new MAC architecture and V2I and V2V vehicles collaborate in management. As a result, many vehicles and RSU can use more efficiently the resource and send data rapidly. The simulation results show that the proposed method can achieve high resource utilization in accordance. Also we can find out the optimal transmission relay time and 2nd relay vehicle selection probability value to spread out V2V/V2I collaborative schedule message rapidly.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.06a
• /
• pp.214-215
• /
• 2013

Current competition among companies than regional, the time constraints, it is globalization, Tilt the efforts of many to be operated by building the efficient distribution system to reduce logistics costs and improve customer service it is reality's there. Therefore, the need for industrial complexes environmentally friendly can be cost competitive companies perform cavitation region's increased. To build the distribution center these logistics system through a joint of freight and appropriate policy is required. In particular, efficient operation through the system construction of industrial complexes in the logistics system is very important in terms of friendly low-cost urban logistics, the environment. Since the traffic volume which is Jipufa and utilization of network is transported by a more appropriate technicians and means suitable operating model can efficiency is improved. However, despite these advantages, research network design has not been actively conducted due to the complexity of the problem. Therefore, in this study, by analyzing the logistics system, and presents the operating model through a simulation and basic settings for the model of the logistics complex based on the analysis result, the construction of infrastructure of logistics industry complex it is intended to present the article.

• Journal of Korean Society of Environmental Engineers
• /
• v.34 no.3
• /
• pp.177-188
• /
• 2012

This study was mainly focused on the development of GIS based decision support system to easily make mitigation scenarios and to conveniently simulate water quality for TMDL. The study area was the 31km section of upper Sapgyo stream in Geum river basin, and QUAL2E model was adopted. GIS DB was built through the collection of the data which includes point/non-point source attributes and various thematic maps. The amounts of discharged loads of BOD, T-N and T-P from unit watershed were estimated respectively. Finally, the system, which can operate water quality simulation through simply modifying their values, was developed. The hypothetical three mitigation scenarios were applied, thereby the most efficient mitigation scenario could be chosen by comparison of the results based on GIS. Therefore, it is expected that the developed system can facilitate the decision makers to select the best alternative through the analysis of the available BMPs. Also, it can be used to develop new scenarios using different methods and algorithms. In the future, more study need to be made to enhance its applicability in the perspective of developing mitigation scenarios through the management of individual pollutant sources and extending study areas.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.10 no.4
• /
• pp.201-210
• /
• 2007

Pollution by chemical substances such as POPs, EDCs and PBTs in the ecosystem has become more complex and varied, increasing the possibility of irreversible damage to human health or the ecosystem. It is necessary to have a exposure assessment in a multi-media environment for various chemical substances is required for efficient management. This study applied MUSEM(Multi-media Simplebox-systems Environmental Model), a multimedia environmental model that can simultaneously evaluate the possibility of exposure of hundreds of chemical substances in order to efficiently manage chemical substances that can have negative impact on human health or ecological environment through environmental contamination. MUSEM executed the modeling for Japan by setting all 47 prefectures of japan as the regional area for 62 chemical substances and the rest of the territory of japan, excluding regional area, as the continental area and made the estimation of concentration among environment media in each administrative area and made the sensitivity analysis on Tokyo area. The results of simulation for chemical distribution showed that most of the target chemicals located in water region. The result of sensitivity analysis for octanol-water partition rate showed that the concentration change of soil in urban/industrial area and sediment in freshwater was high. In the case of sensitivity analysis for degradation rate showed that the concentration change of freshwater, soil in urban/industrial area, and sediment in freshwater was high.