• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.48-54
• /
• 1998

In this study a computerized prototype system was developed with Safety Management Information System(SMIS version 1.0) as a main system and database as subsystems to handle information. Safety management information consists of management aspects and technical elements, but SMIS consists of 4 modules of technical elements to interrelate safety technologies closely. SMIS enables gas industries to manage process safety information effectively and to evaluate hazards. The results from SMIS can be used to the operation manual and the emergency plan. Data base consists of 3 modules of accident data, material data, and equipment data to support SMIS. Also, the case study results proved the usefulness of SMIS for searching and accumulating process safety data. Especially, MIS which has the database suggests a formal structure for scattered raw safety data in gas industries and brings reduction of man power and time.

• Analytical Science and Technology
• /
• v.17 no.4
• /
• pp.355-362
• /
• 2004

Fission products and Inter reaction layer of $U_3Si-Al$ dispersion fuel, irradiated in HANARO research reactor with 121 kW/m of maximum liner power and 63 at% of average burn-up, was characterization by EPMA (Electron Probe Micro Analyzer). The fuel punching system developed by Irradiated Materials Examination Facility (IMEF) has used to make these samples for the EPMA. With this system a very small and thin specimen which is 1.57 mm in diameter and 2 mm in thickness respectively has been fabricated to protect the EPMA operator from high radioactive fuel and to mini-mize the equivalent dose rate less than 150 mSv/h. EPMA was performed to observe layers of sectional, Inter-reaction and oxide with specimens of cutting and polished. Stoichiometry in the Inter-reaction layer with $16{\mu}m$ of thickness was $U_{2.84}$ Si $Al_{14}$ with calibration of $UO_2$ and $U_{3.24}$ Si $Al_{14.1}$ with calibration of standard specimen. metallic precipitates in this layer were not observed using fission products examination.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.9 no.2
• /
• pp.113-119
• /
• 2011

Safe operation and maintenance of engineered dry storage systems for spent fuel from nuclear power plants basically depends on adequately adopted design requirements. The most important design target of the system are those which provide the necessary assurances that spent fuel can be received, handled, stored and retrieved without undue risk to health and safety of workers and the public. To achieve these objectives, the design of the system incorporates features to remove spent fuel residual heat, to provide for radiation protection, and to maintain containment over the lifespan of the system as specified in the design specifications. The features also provide for all possible anticipated operational occurrences and design basis events in accordance with the design basis as guided by the designated regulations. The general performance requirements of a projected storage system are introduced in this paper. The storage system is designed to store fuel assemblies in associated with designated regulatory requirements. Small increases/decreases in maximum burnup can be adjusted with cooling time. These variations are compensated for by a corresponding small site-specific increase/decrease in the design basis-cooling period, as long as the maximum heat load and radioactivity of loaded fuel assemblies are met. Generic design basis events considered for the storage system are summarized. Shielding and radiological requirements along with mechanical and structural are derived in this study.

• Journal of the Korean institute of surface engineering
• /
• v.49 no.2
• /
• pp.166-171
• /
• 2016

Cathodic protection is widely recognized as the most cost effective and technically appropriate corrosion prevention methodology for the port, offshore structures, ships. When applying the cathodic protection method to metal facilities in seawater, on the surface of the metal facilities a compound of calcium carbonate($CaCO_3$) or magnesium hydroxide($Mg(OH)_2$) films are formed by $Ca^{2+}$ and $Mg^{2+}$ ions among the many ionic components dissolving in the seawater. And calcareous deposit films such as $CaCO_3$ and $Mg(OH)_2$ etc. are formed by the surface of the steel product. These calcareous deposit film functions as a barrier against the corrosive environment, leading to a decrease in current demand. On the other hand, the general calcareous deposit film is a compound like ceramics. Therefore, there may be some problems such as weaker adhesive power and the longer time of film formation uniting with the base metal. In this study, we tried to determine and control the optimal condition through applying the principle of cathodic current process to form calcareous deposit film of uniform and compact on steel plate. The quantity of precipitates was analyzed, and both the morphology, component and crystal structure were analyzed as well through SEM, EDS and XRD. And based on the previous analysis, it was elucidated mechanism of calcareous deposit film formed in the sacrificial anode type (Al, Zn) and current density (1, 3, $5A/m^2$) conditions. In addition, the taping test was performed to evaluate the adhesion.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.13 no.5
• /
• pp.359-369
• /
• 2020

In this paper, we proposed a charge pump (CP) circuit that has a wide operating range while reducing the current mismatch for the PLL that generates the main clock of the CMOS X-Ray detector. The operating range and current mismatch of the CP circuit are determined by the characteristics of the current source circuit for the CP circuit. The proposed CP circuit is implemented with a wide operating current mirror bias circuit to secure a wide operating range and a cascode structure with a large output resistance to reduce current mismatch. The proposed wide operating range cascode CP circuit was fabricated as a chip using a 350nm CMOS process, and current matching characteristics were measured using a source measurement unit. At this time, the power supply voltage was 3.3 V and the CP circuit current ICP = 100 ㎂. The operating range of the proposed CP circuit is △VO_Swing=2.7V, and the maximum current mismatch is 5.15 % and the maximum current deviation is 2.64 %. The proposed CP circuit has low current mismatch characteristics and can cope with a wide frequency range, so it can be applied to systems requiring various clock speed.

• Resources Recycling
• /
• v.19 no.6
• /
• pp.43-50
• /
• 2010

The crisis of energy gives rise to the growing concerns over continuing uncertainty in the energy market. Under these circumstances, there are also increasing interests on coals. In particular, Low Rank Coal (LRC) is receiving gradual attentions from green industry. But due to is high moisture content range from 30 - 60%, drying process has to be preceded before being utilized as power plant. In this study drying kinetics of LRC is induced by using a fixed-bed reactor. The drying kinetics was evaluated in from of the particle size, the inlet gas temperature, the drying time, the gas velocity, and the LID ratio. The consideration of the reynold's number was taken for correction of gas velocity, particle size and LID was taken for correction of reactor diameter, packing height of coal. As being seen as characteristic of drying coal, it can be found that fixed-bed reactor can contributed to active drying of free water. In this sense, it could be considered that phase boundary reaction is appropriate mechanism.

• Korean Journal of Soil Science and Fertilizer
• /
• v.39 no.5
• /
• pp.298-302
• /
• 2006

This study was carried out to establish low-input fertilization and seeding technique using the simultaneous with seeding and fertilizer application machine and band spotty applicator which were manufactured for experiment during cultivation of mulching for peanut(Arachis hypogaea L.). The labor hour for seeding by simultaneous with seeding and fertilizing machine was appeared over 90% reduction effect compared with control plot($17.3hr\;10a^{-1}$). In band spotty fertilization plots, the emergence date was delayed about 4 days and the seedling stand rate was decreased 11~18% compared with control plot(man power). The content of total nitrogen of soil after experiment was increased while the contents of organic matter, available phosphate and exchangeable potassium were decreased than before experiment. The content of nitrogen forming nitrate was increased in band spotty fertilization(BSF) plots by increasing the amount of applied fertilizer from early growth stage till the middle growth stage. Growth rate was increased in band spotty fertilization plots and the absorbed amount of phosphate and potassium for peanut were increased in 70% band spotty fertilization plot compared with control plot. Yield of peanut was increased 70% in band spotty fertilization plot due to high pod kernel ratio and ripened pod rate compared with control plot($3,150kg\;ha^{-1}$). It was found that 70% band spotty fertilization was more effective as fertilization method to reduce both environmental pollution and chemical nitrogen fertilizer in plastic film mulching cultivation of peanut.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.21 no.2
• /
• pp.110-115
• /
• 2011

Objectives: The aim of this study is to survey for finding asbestos containing equipment at the laboratories using picture based questionnaire and polarized light microscopic analysis. Methods: This study was conducted from 2009 to 2010 at a university in Seoul. In 2009, picture based questionnaire was distributed to 100 laboratories during the regular laboratory air quality monitoring. In 2010, we emailed all professors of the same university who have laboratories to participate voluntarily this survey. For the laboratories consented to participate survey, picture based questionnaire was distributed and collected. Suspected asbestos containing material and apparatus were collected at the laboratories which replied they have suspected material and equipment. Collected samples were analyzed with polarized light microscope at the laboratory accredited by ministry of employment and labor in Korea. Results: Total of 18 out of 100 laboratories reported that they had suspected asbestos containing equipment in 2009. Twenty-three samples were collected and three samples (13%), one heating mantle and two pairs of insulation gloves, contained asbestos. Thirty four laboratories reported they had suspected asbestos containing material or equipment in 2010. Sixty samples were collected and four of them (6%), two pairs of insulation gloves, one packing rope in dry oven and, one pair of tongs, contained asbestos. All founded asbestos was chrysotile and the content of chrysotile was more than 90% for all equipment except heating mantle which has less than 1%. Conclusions: We confirmed that asbestos was still used at the laboratories though strict regulations on asbestos use in Korea. The method of picture based questionnaire invented in this study could be applied for asbestos survey to other research institute or university where there are many laboratories because of its simplicity and accessibility without huge man power, cost and time.

• Korean Journal of Community Nutrition
• /
• v.4 no.1
• /
• pp.83-94
• /
• 1999

This study was carried out to investigate the general characteristics of public health nutritionists, the current status of nutrition services operation, the recognition about nutrition services of public health center related man power, the job satisfaction and self-assessment and the need for a retraining course of public health nutritionists. The subjects were 58 public health nutritionists who responded to the questionnaire distributed at the annual retraining program in 1998. The results of this study are summarized as follows. 1) 46.5% of the nutritionists were 26-30 years old, 62.1% were 4 year university graduates 74.1% were food and nutrition majors and 51.7% were daily workers. 2) Among the public health center-related manpower, the recognition about nutrition services was the highest for the manager of family health section, followed by the head of public health centers, and then the general nurse in public health centers. 3) The ranking of the reasons for job satisfaction of the public health nutritionists was, relationship with colleagues(3.84), inhabitants response after nutrition counselling(3.53), specialized value realization/conviction about duty(3.35), contents of the work(3.10), value achievement(3.08), self achievement/development(3.00), self discretion(2.92), participation in policy decisions(2.90), work load(2.75), chance of retraining and acquisition of new information(2.73), working environment(2.69), supervisio $n^port by superiors(2.67), salary(2.38), supply of necessary education material, technique(2.37), and budget security(2.22). 4) The satisfaction of the inhabitant's responses after nutrition counseling was the highest among the 4 year university graduates(p<0.05), the satisfaction of the specialized value realization/conviction about duty was the highest among the nutritionists 26-30 years old(p<0.05). Food and nutrition majors(p<0.05) and those having worked less than 3-5years at public health centers also showed much satisfaction(p<0.05). Satisfaction with the salary was the lowest among the food and nutrition majors(p<0.01) and daily workers(p<0.001). The satisfaction with the participation in policy decisions was the lowest among the daily workers(p<0.01). 5) The ranking for the level of self-assessment were, nutrition and dietetic practice(2.92), communication(2.80), management(2.77), public health science and practice(2.66)(p<0.01). The general characteristics such as the level of education, major, employment condition, current public health center's tenure, and charge experience of the nutrition guidance work were not significantly related to self-assessment except the management part(p<0.05). The higher the satisfaction of specialized value realization/conviction about the duty, the better the total score on the self-assessment(p<0.05)..

• Journal of agriculture & life science
• /
• v.45 no.1
• /
• pp.109-117
• /
• 2011

The antioxidant activities of 60% ethanol extracts from different parts (leaf, stem, and root) of Artemisia argyi using an in vitro system were examined to find a possibility as natural antioxidant substances. The highest total phenolics (23.08 mg/g) was obtained by 60% ethanol extract of leaf. The scavenging activity of 60% ethanol extract from different parts of A. argyi on the DPPH and ABTS radical was raised with increasing amount of extracts, and 60% ethanol extract from leaf showed the highest radical scavenging activities. The leaf extract presented the highest reducing power and strong inhibitory effect on autooxidation of linoleic acid. In MDA formation using mouse brain homogenates, the 60% ethanol extracts of A. argyi also exhibited antioxidant activity as inhibition of MDA (71.38% at $200{\mu}g/mL$). Therefore, these results suggest that the 60% ethanol extract of A. argyi leaf possess excellent antioxidant activities and thus it has great potential as a source for natural antioxidant.