• 한국CDE학회논문집
• /
• 제4권1호
• /
• pp.52-59
• /
• 1999

The CAD/CAM System for deep drawing transfer die tin mechanical press process has been developed. The developed CAD system can generate the drawing of transfer die in mechanical press. Using thee results from CAD system, it can generate the NC data to machine die's elements on the CAD system. This system can reduce design man-hour an human errors. In order to construct the system, it is used to automated the design process and generate the NC data using concepts of the designing rule and the machining rule. The developed system is based on the knowledge base system which is involved a lot of expert's technology in the practice field. Using AutoLISP language under the AutoCAD system, CTK customer language of SmartCAM is used as the overall CAD/CAM environment. Results of this system will be provide effective aids to the designer and manufacturer in this field.

• 설비공학논문집
• /
• 제21권10호
• /
• pp.545-552
• /
• 2009

It is common to design the duct branches where to supply the required air flow for individual room in residential apartment house. And TAB process is applied to control the designed air volume with adjusting volume dampers and/or supply diffusers after fully installing the ventilation system. This process has been resulted increasing the initial cost for the residential ventilation system because of man-hour and accessories such as volume control damper or diffuser. However it is difficult to adjust the air volume adequately in small air duct branches in residential ventilation system. The purpose of this study is to figure out the performance of Multidrop chamber coupling system for the residential ventilation system.

• 한국생산제조학회지
• /
• 제7권3호
• /
• pp.85-91
• /
• 1998

In this paper an assessment has been proceeded about component technology that stamping car panel can be designed and manufactured efficiently. Also this study investigate standard model of CAD/CAM system in production process of automobile dies, Recently, motor companies are doing their best to increase productivity and to reduce production time. So to develop user-friendly and effective standard model of CAD/CAM system is very important. The cbtained results will lead to the reductions in lead time and man-hour required for the design and manufacture of the automobile dies.

• 한국식품영양학회지
• /
• 제1권2호
• /
• pp.95-101
• /
• 1988

In order to produce lactic acid and calcium lactate very useful for foods and medical supplies, lactic acid fermentation was studied by Lactobacillus sporogenes, a spore forming lactic acid bacterium. When this bacterium was cultured aerobically in the spore forming medium, the spore forming rate was 96.0% as total cell number 20$\times$108/ml, spore number 19.2$\times$108/ml. One minute agitating every 1 hour in the flask culture, or agitation of 100rpm in the fermenter was most efficient to continue to ferment at 45$^{\circ}C$ for 4days in the fermentation medium containing 10% glucose as carbohydrate and CaCO3 as a neutralizing agent. This homofermentative lactic acid bacterium showed fermentation yield of 99.3% and more than 98.2% of the yield was L(+)-lactic acid.

• Journal of Gastric Cancer
• /
• 제15권2호
• /
• pp.127-131
• /
• 2015

The surgical indications for the treatment of gastroesophageal reflux disease (GERD) in patients with esophageal motility disorders have been debated. We report a case of antireflux surgery performed in a patient with absent esophageal motility as categorized by the Chicago classification (2011). A 54-year-old man underwent laparoscopic Toupet fundoplication due to apparent GERD and desire to discontinue all medications. After surgery, his subjective symptoms improved. Furthermore, objective findings including manometry and 24-hour pH-metry also improved. In our experience, antireflux surgery can improve GERD symptoms patients, even with absent esophageal motility.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2007년도 특별논문집
• /
• pp.135-141
• /
• 2007

CSR(Common Structure Rules) enter into force on $1^{st}$ April 2006. Generally for double hull tankers of less than 150m in length, the Rules of the individual Classification Society are to be applied. Where high tensile stresses act through an intermediate plate, increased fillet welds or penetration welds are to be used longitudinal/transverse bulkhead primary support member end connections to the double bottom. If workers have begun to make used of established procedures between corrugated BHD and lower stool joint, first to welding on groove of face and then it has to gouging to blow on groove of root. So amount of man-hour increased, productivity secreased.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1367-1370
• /
• 2002

This paper introduces a new web based method to remotely upgrade firmwares of Cable Modems (CM) which are integral part in providing high-speed Internet access through Hybrid Fiber Coaxial (HFC) networks. Also, it discusses various practical problems arising in the upgrading process. Traditional upgrade has been performed by modifying the CM configuration fie. This paper shows a new web based CM firmware upgrade method using SNMP and MIB which greatly reduces upgrading time, cost and man-hour than traditional firmware upgrade methods. This method has been shown to be very efficient and practical. This method will make significant impact especially because tens of million cable modems are currently waiting to be upgraded soon to the next version from the current version.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.461-464
• /
• 2005

As the research on the development of the lightweight concrete block by the hydro-thermal synthetic reaction mixed with the calcareous material and bottom ash that is used less among siliceous material, we studied on the physical and chemical characteristics in the changes of hydro-thermal synthetic reaction of lightweight concrete block compounded with the PP fiber to increase flexural toughness and to prevent fragility failure. The results of the experiment are as follow. According to the increase of hydro-thermal synthetic reaction and the fiber content, compressive and flexural strength increased. Despite the changes of the hydro-thermal synthetic reaction time, tobermorite was produced on each of the specimens similarly. However, the phase of tobermorite was changed in accordance with the changes of time. Also, $CaCo_{3}$ appeared on the surface of the 9 hour hardened specimen.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.228-229
• /
• 2019

This study performs analyzing a status of labor cost policy of public construction project and labor management information system in Korea for improving of labor cost survey in the construction market. The outcome of this study will be helpful to build a labor cost information system included the information of man-hour, regular pay and benefit, total wage. And if these result is integrated with the information of worker's career, qualification, skill level, it is confidently expected that the survey of labor cost is reliable.

• 대한인간공학회지
• /
• 제29권6호
• /
• pp.943-949
• /
• 2010

When PCB soldering is performed with microscope due to the electronic components' microminiaturization, workers' awkward upper body postures and difficulties being in focus among lens, object and eyes are one of reasons for productivity decline. The object of this study is to investigate the level of difficulties of work and the extent of productivity improvement by changing work interfaces from the work using microscope to the work using LCD monitor. Independent variables was usage of microscope and image system and dependent variables were upper body segments including neck, shoulder, back, and waist, task convenience and eye fatigue. The Visual Analogue Scale (10cm) was used for questionnaire and one way ANOVA (two levels) and two sample t-test were conducted. In addition, RULA rating was conducted for working postures. The result showed that interface changes of LCD monitor, suggested by productivity comparison per one Man Hour, highly contributed to work convenience and productivity improvement.