• Journal of Internet of Things and Convergence
• /
• v.7 no.3
• /
• pp.1-8
• /
• 2021

With the rapid increase in the use of IoT and mobile devices, cyber criminals targeting IoT devices are also on the rise. Among IoT devices, when using a wireless access point (AP), problems such as packets being exposed to the outside due to their own security vulnerabilities or easily infected with malicious codes such as bots, causing DDoS attack traffic, are being discovered. Therefore, in this study, in order to actively respond to cyber attacks targeting IoT devices that are rapidly increasing in recent years, we proposed a method to collect traces of intrusion incidents artifacts from IoT devices, and to improve the validity of intrusion analysis data. Specifically, we presented a method to acquire and analyze digital forensics artifacts in the compromised system after identifying the causes of vulnerabilities by reproducing the behavior of the sample IoT malware. Accordingly, it is expected that it will be possible to establish a system that can efficiently detect intrusion incidents on targeting large-scale IoT devices.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.22 no.2
• /
• pp.267-281
• /
• 2012

SCADA system is a computer system that monitors and controls the national infrastructure or industrial process including transportation facilities, water treatment and distribution, electrical power transmission and distribution, and gas pipelines. The SCADA system has been operated in a closed network, but it changes to open network as information and communication technology is developed rapidly. As the way of connecting with outside user extends, the possibility of exploitation of vulnerability of SCADA system gets high. The methodology to protect the possible huge damage caused by malicious user should be developed. In this paper, we proposed anomaly detection based intrusion detection methodology by estimating self-similarity of SCADA system.

• KNOM Review
• /
• v.22 no.1
• /
• pp.42-51
• /
• 2019

Recently, the amount of internet traffic is increasing due to the increase in speed and capacity of the network environment, and protocol data is increasing due to mobile, IoT, application, and malicious behavior. Most of these private protocols are unknown in structure. For efficient network management and security, analysis of the structure of private protocols must be performed. Many protocol reverse engineering methodologies have been proposed for this purpose, but there are disadvantages to applying them. In this paper, we propose a methodology for inferring a detailed protocol structure based on network trace analysis by hierarchically combining CSP (Contiguous Sequential Pattern) and SP (Sequential Pattern) Algorithm. The proposed methodology is designed and implemented in a way that improves the preceeding study, A²PRE, We describe performance index for comparing methodologies and demonstrate the superiority of the proposed methodology through the example of HTTP, DNS protocol.

• The KIPS Transactions:PartC
• /
• v.11C no.3
• /
• pp.319-326
• /
• 2004

To help network intrusion detection systems(NIDSs) keep up with the demands of today's networks, that we the increasing network throughput and amount of attacks, a radical new approach in hardware and software system architecture is required. In this paper, we propose a Network Processor(NP) based In-Line mode NIDS that supports the packet payload inspection detecting the malicious behaviors, as well as the packet filtering and the traffic metering. In particular, we separate the filtering and metering functions from the deep packet inspection function using two-level searching scheme, thus the complicated and time-consuming operation of the deep packet inspection function does not hinder or flop the basic operations of the In-line mode system. From a proto-type NP-based NIDS implemented at a PC platform with an x86 processor running Linux, two Gigabit Ethernet ports, and 2.5Gbps Agere PayloadPlus(APP) NP solution, the experiment results show that our proposed scheme can reliably filter and meter the full traffic of two gigabit ports at the first level even though it can inspect the packet payload up to 320 Mbps in real-time at the second level, which can be compared to the performance of general-purpose processor based Inspection. However, the simulation results show that the deep packet searching is also possible up to 2Gbps in wire speed when we adopt 10Gbps APP solution.

• Journal of Internet Computing and Services
• /
• v.13 no.2
• /
• pp.41-49
• /
• 2012

Wireless network support and extended mobile network environment with exponential growth of smart phone users allow us to utilize the network anytime or anywhere. Malicious attacks such as distributed DOS, internet worm, e-mail virus and so on through high-speed networks increase and the number of patterns is dramatically increasing accordingly by increasing network traffic due to this internet technology development. To detect the patterns in intrusion detection systems, an existing research proposed an efficient algorithm called the jumping window algorithm and analyzed approximately 2,000 patterns in Snort 2.1.0, the most famous intrusion detection system. using the algorithm. However, it is inappropriate from the number of TCAM lookups and TCAM memory efficiency to use the result proposed in the research in current environment (Snort 2.9.0) that has longer patterns and a lot of patterns because the jumping window algorithm is affected by the number of patterns and pattern length. In this paper, we simulate the number of TCAM lookups and the required TCAM size in the jumping window with approximately 8,100 patterns from Snort-2.9.0 rules, and then analyse the simulation result. While Snort 2.1.0 requires 16-byte window and 9Mb TCAM size to show the most effective performance as proposed in the previous research, in this paper we suggest 16-byte window and 4 18Mb-TCAMs which are cascaded in Snort 2.9.0 environment.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.3 s.357
• /
• pp.33-40
• /
• 2007

In this paper, low-rate TCP attack as one of shrew attacks is considered and the scaling based dynamic time warping (S-DTW) algorithm is introduced. The low-rate TCP attack can not be detected by the detection method for the previous flooding DoS/DDoS (Denial of Service/Distirbuted Denial of Service) attacks due to its low average traffic rate. It, however, is a periodic short burst that exploits the homogeneity of the minimum retransmission timeout (RTO) of TCP flows and then some pattern matching mechanisms have been proposed to detect it among legitimate input flows. A DTW mechanism as one of detection approaches has proposed to detect attack input stream consisting of many legitimate or attack flows, and shown a depending method as well. This approach, however, has a problem that legitimate input stream may be caught as an attack one. In addition, it is difficult to decide a threshold for separation between the legitimate and the malicious. Thus, the causes of this problem are analyzed through simulation and the scaling by maximum auto-correlation value is executed before computing the DTW. We also discuss the results on applying various scaling approaches and using standard deviation of input streams monitored.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.5
• /
• pp.919-939
• /
• 2021

As a next-generation communication technology, 5G networks are capable of handling large amounts of traffic based on higher speeds, shorter communication delays, and higher connectivity compared to 4G networks. In this 5G network environment, base stations are installed all over the city at high density due to their characteristics, and are connected to user terminals to provide services. Therefore, if the base station is damaged by a malicious attacker, it is expected to cause great damage to users and society as a whole. So the need for secure communication equipment such as 5G base stations has emerged. Therefore, in this paper, we propose the security functional requirements derived using threat modeling, a systematic methodology for 5G base stations, and the security assurance requirements at the level that can cope with the backdoor issues. The security requirements proposed in this paper can be used for base station design and development to construct a secure network environment as a security evaluation standard for 5G base stations.

• Journal of Internet Computing and Services
• /
• v.15 no.3
• /
• pp.79-90
• /
• 2014

User authentication based on ID and PW has been widely used. As the Internet has become a growing part of people' lives, input times of ID/PW have been increased for a variety of services. People have already learned enough to perform the authentication procedure and have entered ID/PW while ones are unconscious. This is referred to as the adaptive unconscious, a set of mental processes incoming information and producing judgements and behaviors without our conscious awareness and within a second. Most people have joined up for various websites with a small number of IDs/PWs, because they relied on their memory for managing IDs/PWs. Human memory decays with the passing of time and knowledges in human memory tend to interfere with each other. For that reason, there is the potential for people to enter an invalid ID/PW. Therefore, these characteristics above mentioned regarding of user authentication with ID/PW can lead to human vulnerabilities: people use a few PWs for various websites, manage IDs/PWs depending on their memory, and enter ID/PW unconsciously. Based on the vulnerability of human factors, a variety of information leakage attacks such as phishing and pharming attacks have been increasing exponentially. In the past, information leakage attacks exploited vulnerabilities of hardware, operating system, software and so on. However, most of current attacks tend to exploit the vulnerabilities of the human factors. These attacks based on the vulnerability of the human factor are called social-engineering attacks. Recently, malicious social-engineering technique such as phishing and pharming attacks is one of the biggest security problems. Phishing is an attack of attempting to obtain valuable information such as ID/PW and pharming is an attack intended to steal personal data by redirecting a website's traffic to a fraudulent copy of a legitimate website. Screens of fraudulent copies used for both phishing and pharming attacks are almost identical to those of legitimate websites, and even the pharming can include the deceptive URL address. Therefore, without the supports of prevention and detection techniques such as vaccines and reputation system, it is difficult for users to determine intuitively whether the site is the phishing and pharming sites or legitimate site. The previous researches in terms of phishing and pharming attacks have mainly studied on technical solutions. In this paper, we focus on human behaviour when users are confronted by phishing and pharming attacks without knowing them. We conducted an attack experiment in order to find out how many IDs/PWs are leaked from pharming and phishing attack. We firstly configured the experimental settings in the same condition of phishing and pharming attacks and build a phishing site for the experiment. We then recruited 64 voluntary participants and asked them to log in our experimental site. For each participant, we conducted a questionnaire survey with regard to the experiment. Through the attack experiment and survey, we observed whether their password are leaked out when logging in the experimental phishing site, and how many different passwords are leaked among the total number of passwords of each participant. Consequently, we found out that most participants unconsciously logged in the site and the ID/PW management dependent on human memory caused the leakage of multiple passwords. The user should actively utilize repudiation systems and the service provider with online site should support prevention techniques that the user can intuitively determined whether the site is phishing.