• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.12-15
• /
• 2008

A distance relay has been widely used for transmission line protection. The distance relay detects a fault based on the calculated impedance i.e. the ratio of the voltage to the current measured from a current transformer (CT) and a coupling capacitor voltage transformer (CCVT), respectively. When a fault occurs and a CT saturates due to the magnitude of fault current, dc component, primary time constant, and the remanent flux of the iron core, the secondary current of a CT is distorted On the other hand, non-fundamental components generated during a fault can increase the error of a CCVT, particularly when a fault distance is short. The distortion of the current and voltage can cause mal-operation or the operating time delay of a distance relay. This paper describes the response of a distance relay considering the errors of a CT and a CCVT. The results indicate that the severe distortion of a CT and a CCVT have noticeable effect to a distance relay.

• Proceedings of the KIEE Conference
• /
• 2008.11a
• /
• pp.9-11
• /
• 2008

A protection current transformer (CT) has been widely used for protection devices. When a fault occurs, a CT should provide the faithful reproduction of the primary fault current. However, a CT may saturates due to the magnitude of fault current, dc component primary time constant and the remanent flux of the iron core, and the secondary current of a CT is distorted. The distorted current can cause mal-operation or the operating time delay of a protection relay. This paper provides a modeling of CT saturation using EMTP-RV. The performance of the proposed CT saturation modeling was investigated under various fault conditions varying the fault distance, fault inception angle, and remanent flux of the iron core. The results indicate that the proposed EMTP-RV modeling can operate correctly, and the reasons for CT saturation are verified by EMTP-RV simulations.

• Journal of Chest Surgery
• /
• v.29 no.4
• /
• pp.472-476
• /
• 1996

Malignant flrous histiocytoma is a rare deep-seated pleomorphlc sarcoma, although its incidence Increasing. In this report, we present a case of a malignant fibrous histiocytoma, arising in the left chest wall in a 37-year-ol4 male patient. He underwent radical on bloc resection which include excision of tumor on left upper chest wall with resection of ribs from the first to third, left upper lo ectomy and chest wall reconstruction with Marled Mesh. However, he had local recurrence and distant metastasis within 12 months of the original operation. Malignant fibrous histiocytoma is an agrressive disease entity, with a propensity for early and distant spread.

• Proceedings of the KIEE Conference
• /
• 2005.07a
• /
• pp.603-605
• /
• 2005

전력수요의 증대에 따른 계동모의 확장에 따라 관련기기는 초고압 및 대용량화 추세에 있다. 이러한 관련기기들 중에서도 특히 154/22.9kV 전력용 변압기는 고장시 수용가의 정전범위가 방대하고 변압기 내부 고장의 복구비용 또한 막대하므로 경제적 손실은 물론 사회적 영향도 크다. 우리나라에서는 1980년 초기부터 154/22.9kV 전력용 변압기의 고장이 급증하였으며, 이러한 원인은 주로 직전접지 방식을 채택하고 있는 한전 계통에서 배전선의 지락고장에 의한 지락고장 전류가 변압기 중성점을 통하여 변압기에 충격을 가함으로써 변압기 권선 단락 절연파괴 및 ULTC 고장 등이 발생하는 것으로 밝혀졌다. 따라서 한전에서는 변압기 중성점으로 흐르는 지락고장전류의 저감을 위해 변압기 중성점 접지 리액터(NGR: Neutral Ground Reactor)를 설치하여 운전하고 있으며, 결과 변압기 고장이 크게 감소하였다. 그러나 모선 절체시 변압기 1, 2차측 차단기 Trip 고장이 발생하였으며, 고장 발생 원인은 NGR 보호계전기 59GT 계전기의 오동작에 의한 86T Lock Out 계전기 동자으로 변압기 1, 2차측 차단기 Trip 고장이 발생한 것으로 추정된다. 따라서 본 논문에서는 무부하 모선 차단시 59GT 계전기에 나타나는 이상 전압을 EMTP (electro-magnetic transient program)를 이용하여 분석하였다.

• Journal of Information Technology Applications and Management
• /
• v.11 no.1
• /
• pp.53-67
• /
• 2004

We propose an advanced transaction scheduling protocol to improve the concurrency and to guarantee the mobility for the mobile database management systems. Mobility, portability, and wireless link In mobile computing environment can cause certain drawbacks, and thus it is more difficult to solve the concurrency control problems. However, a locking scheme should be used to guarantee the data consistency and to prevent the data conflicts. It is well known that data consistency is guaranteed by standard transaction scheduling schemes like two-phase locking (2PL). It has two of operation, lock and unlock. But 2PL does not give solution for mobile system. Altruistic Locking (AL) and classifying transactions, we adapt, can give solution for the previous problems. AL, as an advanced protocol, has attempted to reduce delay effects associated with lock release moment by the use of donation. In this paper, we extend those approaches and classify the transactions to reduce delay effects of short-lived transaction caused by long-lived transaction. In addition, we show efficient solution for the case of disconnection occurrence. Our protocol, namely, Mobile Altruistic Locking (MAL) is shown to be efficiently used in order to reduce delay effects and to guarantee database consistency in a state of the slippery connection in mobile database systems.

• Quality Improvement in Health Care
• /
• v.15 no.2
• /
• pp.65-71
• /
• 2009

문제: 환자가 수술장 내에서 수술을 기다리면서 느끼는 불안감을 최소화할 수 있도록 해야 하지만 수술실의 효율성 및 의료진 편의성 위주로 운영되고 있어 수술실 내 대기시간이 연장되고 있다. 목적: 수술장 내 대기시간을 단축시키기 위해 수술환자의 이동경로에 따른 지연요인과 문제점을 파악하고 개선하여 환자가 수술을 기다리면서 느끼는 불안감을 최소화하고자 한다. 의료기관: 부산시에 소재한 481병상의 종합병원 수술실 질 향상 활동: 수술환자의 대기시간 지연요인과 문제점을 파악하고 개선을 통해 질 향상을 도모하였다. 개선효과: 대기시간 수행율에서 수술장 도착까지의 수행율이 개선전 95%에서 개선후98%로, 수술방 입실까지의 수행율이 개선전 88%에서 개선후 94%로, 마취시작까지의 수행율이 개선전 93%에서 개선후 96%로 수행율이 높아졌다.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.262-265
• /
• 2003

During magnetic inrush or over-excitation saturation of the core in a transformer draws a large exciting current. This can cause mal-operation of a differential relay. This paper proposes a modified current differential relay for transformer protection. In order to cope with the remanent flux at the beginning. the start of saturation of the core is detected and the core flux at the instant is estimated by inserting the differential current into a magnetization curve. Then, this core flux value can be used to calculate the core flux. The proposed relay calculates the core-loss current from the induced voltage and the core-loss resistance; the relay calculates the magnetizing current from the core flux and the magnetization curve. Finally, the relay obtains the modified differential current by subtracting the core-loss current and the magnetizing current from the conventional differential current. The proposed technique not only discriminates magnetic inrush and over-excitation from an internal fault, but also improves the speed of the conventional relay.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.5
• /
• pp.27-33
• /
• 2019

One of serious security threats is a botnet-based attack. A botnet in general consists of numerous bots, which are computing devices with networking function, such as personal computers, smartphones, or tiny IoT sensor devices compromised by malicious codes or attackers. Such botnets can launch various serious cyber-attacks like DDoS attacks, propagating mal-wares, and spreading spam e-mails over the network. To establish a botnet, attackers usually inject malicious URLs into web source codes stealthily by using data hiding methods like Javascript obfuscation techniques to avoid being discovered by traditional security systems such as Firewall, IPS(Intrusion Prevention System) or IDS(Intrusion Detection System). Meanwhile, it is non-trivial work in practice for software developers to manually find such malicious URLs which are hidden in numerous web source codes stored in web servers. In this paper, we propose a security defense system to discover such suspicious, malicious URLs hidden in web source codes, and present experiment results that show its discovery performance. In particular, based on our experiment results, our proposed system discovered 100% of URLs hidden by Javascript encoding obfuscation within sample web source files.

• Proceedings of the KIEE Conference
• /
• 2000.07a
• /
• pp.185-187
• /
• 2000

Fault current is flowed into 154/23kV M. Tr when line-to-ground fault occurs in power system. NGR(Neutral Grounded Reactor) is set up in order to prevent M.Tr fault by limiting magnitude of fault currents. Here, disconnection of NGR causes voltage increase by L-C resonance and line-to-ground fault in an unearthed system results in voltage increase at healthy phases. So Over Voltage Ground Relay(OVGR) is used for tripping M.Tr. Also, buses at second phases of M.Trs are all connected with section circuit breakers closed for the purpose of parallel operation and load shedding. In case of speciality buses are comprised of power cable in part for GIS connection. When no-load charged cable or bus is open by a section CB, unbalanced voltage charged on the bus is induced. Also discrepant opening time for circuit breakers on different phases gives rise to unbalanced zero sequence voltage. It was observed that this zero sequence voltage detected in the 22.9kV P.T (Potential Transformer for bus) mal-operated 59GT and tripped M.Tr. The zero sequence voltage of which vanishing time is longer than relay operating time came out by EMTDC simulation. Also, it was shown that the voltage waves of actual test are similar to those of simulation. On the basis of above results, R-C circuit complement on the relay without any effect on a power system made operating time of the relay longer than vanishing time of distorted waves. Consequently, operating time of the relay was delayed and magnitude of distorted waves was decreased by increasing time constant of the relay.

• Information Systems Review
• /
• v.9 no.1
• /
• pp.139-160
• /
• 2007

Our study focuses on empirical findings of the critical factors which influence the performance of ERP system in business. The study is mainly interested in examining the influence of the characteristics of late process of adopting ERP called "Go-Live" phase with the critical issues like customizing, transformational process of standardization, phased implementation, concurrent operation and use with the current systems on users' ERP satisfaction. The analyses of the data conducted thru moderated regression analysis and subgroup analysis. Using moderated regression analysis, we first examined the effect of moderator variables like customizing, process standardization, sequential use, concurrent use with the current systems. And then, using subgroup analysis is to verify directions of the moderator effects. Having knowledge on the characteristics of ERP Go-Live process can lead to success of ERP system in business. Our results can be beneficial to those organizations who want to adopt and maintain ERP system effectively.