• Journal of Welding and Joining
• /
• v.10 no.4
• /
• pp.82-90
• /
• 1992

지금까지 조선의 용접기술 현황과 최근 가장 관심의 대상인 용접의 합리화 방안에 대해 검토해 보았다. 이러한 합리화 방안은 서론에서도 언급한 바와 같이 점점 국내 시장점유율을 잃어 가고 있는 국내 조선업이 경쟁력을 키워 1995년 이후의 조선호황을 맞아 최대의 이익을 얻고자 하는 노력의 일환이다. 일본등 선진국에 비해 아직까지는 인력수급에 문제가 적은 국내 현실로는 대규모 투자가 소요되는 용접기계화나 Robot화가 성급하다는 의견도 있으나 최근의 노사문제, 제조업분야의 노동인력 부족등을 고려할 때 적극적인 대처가 요구된다. 특히 동구권의 개방화, 중국의 조선업계 발전등을 고려할 때 국내 조선소가 이들과 경쟁하기 위한 유일한 방법은 선진 국에 뒤떨어진 기술의 개발밖에 없다고 판단된다. 이러한 기술개발 특히 용접기술은 조선소 자 체의 설계, 기술, 현장 등에 있는 기술인력들 만에 의해 이루어지는 것이 아니라 용접재료 Maker ,용접기 Robot Maker, 관련설비, 부품Maker등을 포함한 관계자 전원의 노력과 상호협력이 불 가결하다고 생각된다. 아울러 국내 연구소 및 대학에 소속된 전문 연구원들이 국내 조선소가 당면하고 있는 현실 문제점에 좀더 깊은 관심을 가져준다면 선진국과의 기술차이를 극복하는데 필요한 시간을 더욱 단축시킬 수도 있을 것이다.

• Journal of Ship and Ocean Technology
• /
• v.4 no.1
• /
• pp.28-36
• /
• 2000

Numerical simulation based on the superposition of ring waves generated by the linear periodic source distributions for the plunger type wave maker was accomplished. The characteristics of directional spreading function were investigated. Mirror images are also introduced to consider reflections of side-wall together with the reflection coefficient to account for the imperfect reflection from the real side wall in the long experimental towing tank. Unexpected spurious waves, resulting from the combined effect of finite breadth of segmented wave maker, wavelength and main wave maker, wavelength and main wave propagating direction, were observed in the line source method and also in the analysis of the directivity. The influence of spurious waves to the directional spreading function was also investigated.

• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.55-63
• /
• 2004

The purpose of this study is to development of life cycle cost analysis methodology of HVAC system for decision maker. The results of this study are as follows; maintenance/management, equipment construction, planning/design, and demolition/sell phases (1) To develop the cost breakdown structure for LCC in HVAC system, this study apply the method of additional pertinent level, title, CBS number, block number and variable index. (2) LCC analysis order of HVAC system compose four phase. (3) Life cycle costing influence diagram can bring us to make the most efficient decision through a visual graphical diagram that is shown relationship among variables and that decision maker traces easily from life cycle cost analysis situation.

• Journal of Fisheries and Marine Sciences Education
• /
• v.29 no.1
• /
• pp.118-127
• /
• 2017

The aim of the present study is to research how the main factors for the export of SMEs affect SME's Export possibility in structural method. 62 SMEs in Busan Region were participated in this study. For the empirical analysis, a multiple regression analysis and a path analysis were used with Spss18 and Amos 5v to figure out the relationship between the main factors and SME's Export possibility(SEP). The main factors as variances are "Manpower Needs(MN)", "Technology Innovation Needs(TIN)", "Education Needs for Export(ENE)" and "Intention of Decision-Maker(IDM)". The result indicated that ENE and TIN with IDM could structurally affect SEP through path analysis and implies that the main factors have to be considered with the intention of decision-maker as CEO for the successful export of SMEs.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2007.09a
• /
• pp.68-73
• /
• 2007

CPP is widely utilized in RoPax ship, shuttle tanker etc. due to excellent manoeuvrability in low speed, and its usage is recently increased. The CPP was almost designed by CPP maker, and its performance seemed to be not fully optimized. In this study the whole CPP design procedure was reviewed and design technology of CPP was settled down including calculation of spindle torque and MOI, which was fully confirmed by KHI CPP maker. In order to confirm the CPP design technique, a CPP for shuttle tanker was designed and its performance was verified through series of model tests. The propeller efficiency and face cavitation performance of the CPP was well improved. This CPP design technology will be contributed to the optimization of performance and cooperation with CPP maker.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2002.02a
• /
• pp.517-522
• /
• 2002

본 연구는 트랙터용 로타리날의 운동특성을 분석하는 연구로서, 로타리날의 운동특성 분석장치를 이용하여 기존에 국내에서 사용되는 로타리날로 경운 작업을 할 경우, 로타리날 운동 및 형상, 구조에 따른 운동특성을 정밀 분석하였다. 본 연구에서 분석된 문제점 및 보완점을 앞으로 개발될 에너지 절감형 트랙터 로타리날 개발에 필요한 주요 인자를 결정하기 위한 수단으로 사용하는 데 목적이 있으며, 그 구체적인 연구 결과는 다음과 같다. (1) 로타리날의 운동특성을 분석할 수 있는 로타리날 운동특성 분석 시스템을 설계, 제작하였다. (2) 분석 시스템 제어용 프로그램 Visual Basic 6.0 프로그래밍 언어를 사용하여 개발하였다. (3) 국내 로타리날 제조회사 4곳 및 외국 1개사 제품의 운동특성을 분석한 결과, B, C, E maker 제품이 로타리 경운 작업에 적합한 것으로 분석되었다. (4) B, C, E maker 제품에서 살펴보면, 토양을 절단할 때의 경심별 위치를 \circled3부분이 되도록 해야하며, 단면이 확실하게 닿지 않도록 단면의 경우 B maker 형상을 따라야 한다. 또한 배면이 토양에 닿는 부위가 적어야 한다.

• IE interfaces
• /
• v.6 no.2
• /
• pp.151-169
• /
• 1993

In this research, we proposed "coefficient of inequality" as a measure of distributional inequality for an alternative, which is defined as the area between the diagonal line from 0 to 1 and the Lorenz curve of the given alternative. Next, we showed theoretical relationship between stochastic dominance and the coefficient of inequality as a means to determine the preferred alternative when decision is made with incomplete information about decision maker's utility function. Then, two experiments were performed to test subject‘s attitude toward risk. The results of the experiments support the idea that when a decision maker is risk averse or risk prone, he/she can use the coefficient of inequality as a decision rule to choose the preferred alternative instead of using stochastic dominance. Thus, according to decision maker’s attitude toward risk, the decision rule proposed here can be used as a valuable aid in decision making under uncertainty with incomplete information.

• Journal of Ship and Ocean Technology
• /
• v.7 no.1
• /
• pp.13-18
• /
• 2003

The control performances for active re-reflecting wave control suggested in the previous paper have been verified in cases of regular and irregular waves in a real two dimensional wave basin. For regular waves, the control performances are investigated in terms of reflection coefficients, expected amplitudes of propagating waves and wave absorbing capabilities after cessation of wave generation, compared with those of no-control cases. For irregular waves similar verification procedures were adopted. Though there are certain constraints due to the geometrical non-linearity of wave maker and certain nonlinear characteristics due to the near field and gravity waves these experiments show that the control logic could be useful in realizing re-reflecting wave control in conditions of real wave basin.

• Journal of Information Technology Services
• /
• v.21 no.2
• /
• pp.127-143
• /
• 2022

In this study, a usability evaluation tool was developed for "ICANDUINO", a VR-based mobile application for maker education, and usability evaluation was conducted with a heuristic survey method for experts. The usability evaluation tool was derived through literature review and validated by two experts. It consisted of seven domains (effectiveness, efficiency, satisfaction, learnability, memorability, error, and cognitive load) and twenty-five sub-items. As a result of the usability evaluation conducted for six experts, it received the highest score in the domain of efficiency and the lowest score in the domain of error. The improvements of ICANDUINO were derived by analyzing the qualitative opinions of experts in each of the four stages (training, coding, tinkering, and testing) of making. the results of this study can be used as a guideline when evaluating the usability of a mobile app for education.

• Journal of Korean Ophthalmic Optics Society
• /
• v.18 no.3
• /
• pp.231-239
• /
• 2013

Purpose: To design and fabricate the auto pattern maker for the development. Methods: we got the necessary data, needed in design, by using CAD. Based on the these data, we fabricated the trial product for the development of the auto pattern maker. Results: The auto pattern maker were composed with combinations of many elements; pattern making assembly, control panel, frame attachment and prober unit. The pattern making assembly was comprised of the cutter, the pattern holder, pattern remover and silence cover which could minimize the sound during the cutting process. The control panel was designed to be connected and operated with the main printed circuit board. The prober could get the eye shape data by scanning of 1.8 degrees around the groove of the frame through the encoding data according to the address. After starting, scanning was carried out in two passes, i.e. one right-handed and one left-handed. Communication connector could send the eye shape data from auto pattern maker to outer system with the RS232C transmission system. By using the one-way analysis of variance, we got the error rate of cut pattern size for ${\Phi}22mm$, ${\Phi}55mm$ and ${\Phi}62mm$. Because F-value was 0.510 and p-value was 0.601, no statistically significant differences were found. Also, the mean cutting error of the auto pattern maker was 0.0274 mm. Conclusions: we could succeed in making the trial product by applying it to the development of the auto pattern maker. The role of this auto pattern maker is to find a exact required size of lens to fit the frame by measuring the frame. The acquired data are transferred to outer system for grinding and finishing with patternless process. Also, the trial product can produce pattern to fit the frame. Therefore, it was confidently expected that the optometrists could handily produce pattern to fit the frame with this trial product and dispense the ophthalmic lens because of its efficiency and convenience compared to the past.