• Korean Journal of Clinical Laboratory Science
• /
• v.51 no.2
• /
• pp.125-133
• /
• 2019

A microscope is the fundamental research and diagnostic apparatus for clinical investigation of signaling transduction, morphological changes and physiological tracking of cells and intact tissues from patients in the biomedical laboratory science. Proper use, care and maintenance of microscope with comprehensive understanding in mechanism are fully requested for reliable image data and accurate interpretation for diagnosis in the clinical laboratory. The standard operating procedure (SOP) for light microscopes includes performance procedure, brief information of all mechanical parts of microscopes with systematic troubleshooting mechanism depending on the laboratory capacity. Maintenance program encompasses cleaning objective, ocular lenses and inner optics; replacement and calibration of light source; XY sample stage management; point spread function (PSF) measurement for confocal laser scanning microscope (CLSM); quality control (QC) program in fluorescent microscopy; and systematic troubleshooting. Laser safety is one of the concern for medical technologists engaged in CLSM laboratory. Laser safety guideline based on the laser classification and risk level, and advisory lab wear for CLSM users are also expatiated in this overview. Since acquired image data presents a wide range of information at the moment of acquisition, well-maintained microscopes with proper microscopic maintenance program are impulsive for its interpretation and diagnosis in the clinical laboratory.

• Physical Therapy Korea
• /
• v.1 no.1
• /
• pp.83-87
• /
• 1994

The purpose of this paper is to provide an overview of the clinical physical therapy program used at the University of Yonsei Rehabilitation Hospital, for the practicing university trained physical therapists who may be unfamiliar with patients who have suffered a myocardial infarction. The four primary phases of the cardiac physical therapy graded exercise program are: 1) coronary care unit program (phase I), 2) general ward program (phase II), 3) convalescence program (phase III), 4) maintenance program (phase IV). The exercise prescription defines the exercise intensity, duration, frequency, and mode of exercise a after pre- discharge low level graded exercise test(LL-GXT) or symptom limited maximum graded exercise test. A typical exercise routine consists of preparation warm-up exercise, therapeutic exercise, cool-down exercise. Physical therapy is involved in the acute care and rehabilitation of the patient after a myocardial infarction. Therefore, the physical therapist must throughly comprehened the cardiac anatomy, cycle, performance, conduction system, pathogenesis, risk factors, and exercise benefits.

• Journal of the Korean Society for Railway
• /
• v.4 no.4
• /
• pp.138-146
• /
• 2001

For the purpose of the effective maintenance of surface irregularities of rail, this paper investigates the rail service life to a bending fatigue failure of welding parts of rail on the slab track by the structures laboratory testing to derive S-N curves, a GTDAP(General Track Dynamic Analysis Program) to calculate the stresses and a modified Miner's rule to predict a fatigue life. The useful guides for maintenance of rail welded parts on the slab track are proposed in terms of a grinding period and the depth of rail surface irregularities. This study also proposed the guides for maintenance of rail welded part on the ballast track. The effects of fatigue service lives are compared one another.

• Asia pacific journal of information systems
• /
• v.16 no.2
• /
• pp.143-158
• /
• 2006

This paper considers probable determinants of the application software outsourcing costs and focuses on the service level agreement (SLA) influence. Recently, outsourcing clients and vendors have contracted SLA and tried to reflect them on outsourcing prices. While application software maintenance has been one of the most frequently outsourced functions, its cost did not reflect the service level requirements by the client. This paper empirically shows that the service urgency requirement on SLA increases the maintenance programmers' effort and thus increases the vendor's cost. This result can be used by vendors for program allocation purposes.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.379-386
• /
• 2007

Recently the concrete slab tracks are being constructed on roadbed in the Kyong-bu 2nd stage high speed railways. In responding to this trend, new design standards and track materials maintenance systems, based on the slab track material safety and usage perspective, are needed. This research provides the design standards and the maintenance system. The proposed standards and the maintenance system are based on the track theory and the track-train interaction program developed, where the roadbed displacement and train speed are utilized as mediating variables. In the analysis, the dynamic response of track-train interaction apply to various speeds and displacements. the roadbed displacement is shown in a sine curve, the scope of the displacement occurrence, presented in its wavelenths, include 6meters, 10meters, 15meters, 20meters, 30meters. the train speeds involved are 50,100, 150,200,250,300,350,400 kilometers per hour.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1014-1023
• /
• 2008

The K-AGT test line is managed similarly to revenue operation and operated automatically 120km per day, total 90,000km from August 2004 to December 2007. To enhance reliability of developed system, maintenance information system based on RCM is applied. The maintenance program applied in test line is based on RCM which prevent a fault before it happens and a fault made in test line is analysed by reliability growth test. Vehicle system, power supply system, signalling system, track and infrastructure are built in test line and it is reviewed enhancing system performance and changing designs to commercialize through reliability growth analysis method.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.177-183
• /
• 2009

This paper deals with the topical problems of the Life Cycle Costs in connection with the rolling stocks. the LCC philosophy has already entered the third decade. this philosophy contributed towards the new relationship's comprehension between railway vehicle producers' and railway vehicle users' sphere. this leads together to the technical-economical solution convenient for the both sides. In the point of manufacturer, It is said that low operational costs could be reached using a well-designed and structured maintenance program. this is due to the proper technical analysis of critical components that leads to low costs of maintenance and a superior reliability without increasing the capital investment. but, This paper presents both topical experiences with the LCC models for the railways vehicles and also procedures during Life Cycle Costs calculations. In conclusion I want to introduce how to calculate LCC & what kinds of softwares are used based on VVVF EMU vehicle

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.376-380
• /
• 2015

Life-Cycle Cost Analysis (LCCA) for highway projects is known as an effective analytical technique that uses economic principles to evaluate long-term alternative investment options, especially for comparing the values of alternative pavement design structures and construction strategies. In the Unites States, the 2012 Moving Ahead for Progress in the 21^st Century Act (MAP-21) amended the United States Code to mandate that the United States Government Accountability Office (GOA) conducts a study of the best practices for calculating life-cycle costs and benefits for the federally funded highway projects in 2013. The RealCost 2.5CA program was developed and adapted as an official LCCA tool to comply with regulatory requirements for California state highway projects in 2013. Utilization of this California-customized LCCA software helps Caltrans to achieve substantial economic benefits (agency cost and road user cost savings) for highway projects. Proper implementation of LCCA for roadway construction and rehabilitation would deliver noticeable savings of agency's roadway maintenance cost especially in developing counties where financial difficulties exist.

• Journal of Korean Society of Rural Planning
• /
• v.12 no.1 s.30
• /
• pp.11-21
• /
• 2006

The purpose of this study is to verify the result of the previous studies and to clarify the types and activation factors of maintenance activities of the naturally favorable water space through the participation of residents in rural areas, through a further survey of the area proposed as a program in the existing study review and previous study related to the participation of residents. The survey was conducted through the survey of 1,242 households and 1,335 persons intended for Japanese rural areas. The study result is summarized as follows. The types of the maintenance activities in the areas intended for the survey have been classified into 'rural type' and 'combination type' through the analysis results by the references like the comparison analysis, job percentage and main utilization purpose of facilities for each type of maintenance and operation activities. In case of the 'rural type' area, residents were doing maintenance activities centered on the group activities rather than personal maintenance activities. Also, the activities of maintenance & operation group members were more active than non-members, and the water-friendly utilization to the facilities was not directly affecting the maintenance activities of residents. In case of the 'combinational type' area, there was no common characteristic according to each area, and the participation percentage in the maintenance activities was low compared with the 'rural type' area. According to the analysis result based on the participation degree of personal maintenance activities, the repair of facilities as a naturally favorable water space, implementation of projects reflecting the opinions of residents, educational programs conducted in order to motivate the participation of residents, etc. have been analyzed as the factors affecting the activation of maintenance activities of residents. Through the above results, for continuous maintenance activities to be made with residents as a main body in the future, it is necessary to support maintenance groups on an administrative level and procure experts for the production and operation of programs that can increase the participation percentage of residents.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.12 no.3
• /
• pp.1-12
• /
• 2009

This study aims to analyze the existing problem of geo-spatial information maintenance and then, show maintenance strategies suitable for new integrated environments. We look for AS-IS which is provider-centered, top-down, and also drive implications from analyzing oversea best practice. For analyzing of geo-spatial maintenance pattern, we polled about 20 local governments and private enterprise to find out AS-IS of geo-spatial information and result in maintenance pattern and component. From this, we suggest 4 kinds of strategies. This study shows the strategy not only which decide the question about the problem of existing geo-spatial maintenance but which find a way of combining and utilizing all geo-spatial information which is 8 criteria basic geographical information. This is a win-win program of all organization which produce, construct, make full use of national geo-spatial information.