• 에너지공학
• /
• 제29권1호
• /
• pp.52-57
• /
• 2020

가동중정비(OLM : On-Line Maintenance)란 발전소 건전성 유지를 위해 운전 중에 수행하는 예방정비 활동으로 특히 안전설비에 대해 운전 중에 수행하는 예방정비 활동을 말한다. 국내 원자력발전소에서는 2009년부터 가동중정비 도입을 위한 타당성검토를 수행하였고 2010년 규제기관에서도 규제지침에 대한 연구과제를 완료하여 가동중정비 도입을 검토하였으나 후쿠시마 사고 등 원자력발전소의 대외여건 변화 등으로 도입검토가 중단된 상태이다. 하지만 원전의 안전성과 운전성을 향상시키기 위하여 근본적인 대책 수립이 요구되고 있는데 이를 위하여 필요한 가동중정비가 왜 필요한지 어떠한 효과가 있는지 등에 대하여 고찰하여 보았다.

• 전기학회논문지
• /
• 제67권5호
• /
• pp.601-610
• /
• 2018

The purpose of this paper is to establish a new optimum Generator Maintenance Scheduling(GMS) considering renewable energy generator. In this paper, the total renewable energy generation is estimated using hourly capacity factor of renewable energy generator. The GMS was optimized with the objective function of maximizing the minimum reserve rate, minimizing the probabilistic production cost, minimizing the loss of load expectation, and minimizing $CO_2$ emissions. In the case study of this paper, GMS considering renewable energy and GMS not considering renewable energy are shown by each objective function. And it shows scenarios of the reliability, the environmental and economical factors when two nuclear power plants inputted and ten coal thermal power plants shut downed respectively.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권7호
• /
• pp.1080-1084
• /
• 1999

Carbon (C) and nitrogen (N) balance technique was used to determine energy balance in Rhode Island Red (RIR) and White Leghorn (WL) laying hens fed maize-and broken rice (BR)- based diets. Carbon and nitrogen intake and outgo were determined for three days on ad libitum fed diets followed by 2/3 of ad libitum intake for next three days. Carbon analysis was done by using four 'U' tubes in which carbon dioxide released during bomb calorimetry was absorbed on drierite in tube 1 and 2 whereas tube 3 and 4 contained sodalime self indicating granule. Carbon in $CO_2$ was determined by an open circuit respiration system. Energy retention (E, kcal) was calculated as E = 12.386 C (g) - 4.631 N (g). By regressing metabolisable energy (ME) intake on energy balance, maintenance ME requirement of RIR was 128 whereas, that of WL hens was $144kcal/kg\;W^{0.75}/d$. Effciency of utilization of ME for maintenance from BR-based diet in RIR hens was equal but in WL hens it was 11% less than maize-based diet.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 Proceedings of The 6th korea-china joint workshop on nuclear waste management
• /
• pp.60-75
• /
• 2005

The remote operation of the Advanced Spent Fuel Conditioning Process (ACP) is analyzed by using the 3D graphic simulation tools. The ACP equipment operates in intense radiation fields as well as in a high temperature. Thus, the equipment should be designed in consideration of the remote handling and maintenance. As well as suitable remote handling and maintenance method needs to be provided. To provide such remote operation technology, we developed the graphic simulator which provides the capability of verifying the remote operability of the ACP without fabrication of the process equipment. In other words, by applying virtual reality to the remote maintenance operation, a remote operation task can be simulated in a computer, not in a real environment. In this way the graphic simulator can substantially reduce the design cost of the remote operation process and the equipment. Also it can provide new operation concept that is more reliable, easier to implement, and easier to understand.

• Asian-Australasian Journal of Animal Sciences
• /
• 제32권9호
• /
• pp.1397-1406
• /
• 2019

Objective: Feed energy required for pigs is first prioritized to meet maintenance costs. Additional energy intake in excess of the energy requirement for maintenance is retained as protein and fat in the body, leading to weight gain. The objective of this study was to estimate the metabolizable energy requirements for maintenance ($ME_m$) by regressing body weight (BW) gain against metabolizable energy intake (MEI) in growing pigs. Methods: Thirty-six growing pigs ($26.3{\pm}1.7kg$) were allotted to 1 of 6 treatments with 6 replicates per treatment in a randomized complete block design. Treatments were 6 feeding levels which were calculated as 50%, 60%, 70%, 80%, 90%, or 100% of the estimated ad libitum MEI ($2,400kJ/kg\;BW^{0.60}\;d$). All pigs were individually housed in metabolism crates for 30 d and weighed every 5 d. Moreover, each pig from each treatment was placed in the open-circuit respiration chambers to measure heat production (HP) and energy retained as protein ($RE_p$) and fat ($RE_f$) every 5 d. Serum biochemical parameters of pigs were analyzed at the end of the experiment. Results: The average daily gain (ADG) and HP as well as the $RE_p$ and $RE_f$ linearly increased with increasing feed intake (p<0.010). ${\beta}$-hydroxybutyrate concentration of serum tended to increase with increasing feed intake (p = 0.080). The regression equations of MEI on ADG were MEI, $kJ/kg\;BW^{0.60}\;d=1.88{\times}ADG$, g/d+782 ($R^2=0.86$) and $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$. Protein retention of growing pigs would be positive while REf would be negative at this feeding level via regression equations of $RE_p$ and $RE_f$ on MEI. Conclusion: The $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$ in current experiment. Furthermore, growing pigs will deposit protein and oxidize fat if provided feed at the estimated maintenance level.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1354-1358
• /
• 2003

The process equipment for handling high level radioactive materials like spent fuels is operated in a hot cell, due to high radioactivity. Thus, this equipment should be maintained and repaired optimally by a remotely operated manipulator. The master-slave manipulators(MSM) are widely used as a remote handling device in the hot cell. The equipment in the hot cell should be optimally placed within the workspace of the wall-mounted slave manipulator for the maintenance operation. But, because of the complexity in the hot cell, there would be some parts of the equipment that are not reached by the MSM. In this study, the maintenance process for these parts of the equipment is developed using virtual prototyping technology. To analyze the workspace of the maintenance device in the hot cell and to develop the maintenance processes for the process equipment, the virtual mock-up of the hot cell for the spent fuel handling process is implemented using IGRIP. For the implementation of the virtual mock-up, the parts of the equipment and maintenance devices such as the MSM and servo manipulator are modeled and assembled in 3-D graphics, and the appropriate kinematics are assigned. Also, the virtual workcell of the spent fuel management process is implemented in the graphical environment, which is the same as the real environment. Using this mock-up, the workspace of the manipulators in the hot cell and the operator's view through the wall-mounted lead glass are analyzed. Also, for the dedicated maintenance operation, the analyses for the detailed area of the end effectors in accordance with the slave manipulator's position and orientation are carried out. The parts of the equipment that are located outside of the MSM's workspace are specified and the maintenance process of the parts using the servo manipulator that is mounted in the hot cell is proposed. To monitor the process in the hot cell remotely, the virtual display system by a virtual camera in the virtual work cell is also proposed. And the graphic simulation using a virtual mock-up is performed to verify the proposed maintenance process. The maintenance process proposed in this study can be effectively used in the real hot cell operation and the implemented virtual mock-up can be used for analyzing the various hot cell operations and enhancing the reliability and safety of the spent fuel management.

• Asian-Australasian Journal of Animal Sciences
• /
• 제12권7호
• /
• pp.1085-1089
• /
• 1999

Energy requirement of Rhode Island Red (RIR) hens was studied by comparative slaughter technique. Seventeen hens above 72 weeks of age were slaughtered in batches. Batch I consisted of 5 hens which were slaughtered initially. Batch II comprised of six hens, which were fed ad libitum broken rice (BR)-based diet for 18 days. Record of feed intake, number of eggs laid and egg weight during the period was kept. These hens were slaughtered and body energy content was determined. Egg energy was consisted as energy deposited. Batch III consisting of six hens which were fed varying quantity of diet for 15 days, were slaughtered similarly as hens of batch II. Regression equation (body weight to body energy) developed on batch I was applied to batch II and developed on batch II was applied to batch III hens, to find out initial body energy content of hens. Egg energy (EE) was calculated according to formula: EE (kcal) = -19.7 + 1.81 egg weight (g). Regressing metabolisable energy (ME) intake on energy balance (body energy change + egg energy), maintenance ME requirement of hens was found to be $119.8kcal/kg\;W^{0.75}/d$. Multiple regression of ME required for production on energy retained as protein and fat (body plus egg energy) indicated that RIR hens synthesize proteins with an efficiency of 85.5 and fat with an efficiency exceeding 100 percent on BR based diet.

• 설비공학논문집
• /
• 제24권4호
• /
• pp.343-350
• /
• 2012

The major goal of building energy management is to minimize the energy consumption while maintaining the comfortable environment condition. Nowadays building energy management to save HVAC energy and so on is the most critical issue for existing building service branch with high efficiency equipments and their optimal operation. The effects on the building energy savings of the building equipment retrofit and the improvement of its operation method, especially in the field of HVAC system, were analyzed in this study for domestic small and/or medium sized buildings. Over 8.8% of energy saving was achieved compared withe total energy consumption in commercial building. These results could be used for reasonable maintenance and efficient management of the various building service equipments and related systems.

• 한국태양에너지학회 논문집
• /
• 제25권4호
• /
• pp.53-60
• /
• 2005

The purpose of this study is to improve energy efficiency of windows in office buildings through the evaluation of their heating, cooling and illumination load. Energy efficiency is influenced by window size which is determined at the early stage of building design. The process of this study is as follows. First, energy performance is analysed according to the various rates of windows through computer simulation (ECOTECT). Then, the annual heating, cooling and illuminating loads according to the different window sizes are compared one another. Results indicated that the optimal window size considering energy efficiency is 50% of the surface area. When the window size is 50% of the surface area, annual maintenance expense is also smallest. Since the cost of cooling is larger than that of heating, too low indoor air temperature in summer is unfavorable based on the reasonable annual maintenance expenses.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2017년도 추계학술논문요약집
• /
• pp.331-332
• /
• 2017