• Journal of Korean Society of Transportation
• /
• v.22 no.6
• /
• pp.159-173
• /
• 2004

Using a generalized translog multiproduct cost function model, this paper examines economies of scale and scope in the vertically-integrated Korean railway industry. The paper then conceptualizes that the Korea National Railroad (KNR) produces four outputs (passenger-kilometers, ton-kilometers of freight, average length of passenger trips, and average length of freight haul) using three input factors(labor, fuel and maintenance, and rolling stock and capital). Using time series data collected from the KNR's annual records for the years from 1977 to 2002, the simultaneous equation system consisting of a cost function and two input share equatins is estimated with the Zellner's iterative seemingly unrelated regression. The findings show that the cost function corresponding to a non-Cobb-Douglas, non-homothetic, and non-homogeneous production technology adequately represents the KNR's cost structure. On the other hand, the Korean railway industry experiences sizeable overall scale economies, which result from substantial product-specific scale economies associated with passenger-kilometers and freight ton-kilometers and from scope economies associated with their joint production. In addition, the magnitude of economies of scope is influenced largely by the ratio of passenger trips, and has increased over time as the former has increased while the latter has decreased.

• Journal of Korea Water Resources Association
• /
• v.40 no.6 s.179
• /
• pp.485-494
• /
• 2007

This study was performed to evaluate the environmental qualities of the revetment construction methods and the river-facility materials using Life-Cycle-Assessment(LCA) for the nature-friendly design of close-to-nature river, The investigation results on the environmental qualities of energy and materials used to the close-to-nature river plan showed that the environmental impacts per unit weight increased in the order of gasoline > diesel > cement > wood. The environmental impacts per unit area of revetment construction method exhibited that the environmental loadings increased in the order of gabion > revetment > cribwork. In addition, it was observed that the environmental impact was reduced by improving the materials of zinc-galvanized wire. The model basin investigated in this study was the $0.3km^2$ area of river improvement works in Kyung stream, which is a tributary to the Seomjin river and the second regional stream. The research was conducted based on the 30years by life expectancy of artificial facilities. For the comparisons of revetment techniques with respect to the environmental qualities, the method resulted in the highest environmental loadings. The method using ready-mixed concrete ranked second in the environmental loadings of revetment techniques. The present results of this study are expected to play a beneficial role in the nature-friendly design of close-to-nature river by quantitatively identifying the environmental quality of total procedures (i.e., combination of techniques, selection of river-facility materials, maintenance of river-facility) applied to close-to-nature river plan.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.20 no.5
• /
• pp.1337-1345
• /
• 2006

Hypercholesterolemia is a pivotal pathogenic factor for the development and maintenance of atherosclerosis. The present study was designed to evaluate whether the methanol extract of Sorbus commixta cortex (MSC) restores vascular dysfunction in association with the aortic expressions of proinflarnmatory and adhesion molecules in high cholesterol (HC) diet-rats. Chronic treatment with low (100 mg/kg/day) or high doses (200 mg/kg/day) of MSC lowered the increase in plasma levels of triglyceride (TG) and low-density lipoprotein (LDL) cholesterol induced by a cholesterol-enriched diet without affecting on the plasma level of high density lipoprotein (HDL)-cholesterol. Vascular tone attenuated in the HC-diet rats was restored by administration with MSC. Treatment with MSC also suppressed the HC-induced increase in the monocyte chemoattractant protein-1 (MCP-1) and nuclear factor-$_K$B (NF-$_K$B) p65 expressions as well as expressions levels of adhesion molecules including intercellular adhesion molecule-1 (ICAM-1), vascular cell adhesion molecule-1 (ICAM-1), and E-selectin in aorta. The present study also showed that MSC inhibited the HC-mediated induction of ET-1 and ACE expression. In histopathological examination, aortic segments in the HC-diet rat revealed thickening intima and media, which were blocked by administration with MSC. Taken together, MSC could suppress the development of atherosclerosis in the HC-diet rat model through the inhibition of the aortic expression levels of pro-inflammatory and adhesion molecules.

• Horticultural Science & Technology
• /
• v.19 no.2
• /
• pp.174-178
• /
• 2001

Absorption potential of oak charcoal was estimated using simulated static and dynamic systems to establish a model for practical application of the charcoal in modified atmosphere (MA) packaging and during the storage of 'Fuji' apples. Practical MA packaging was performed using $60{\mu}m$ PE film zipper bags in which five apples were placed. Absorption potential of oak charcoal was $58.4{\mu}L/100g$ charcoal for ethylene and 583 mg/100 g charcoal for carbon dioxide. Effects of enclosing a 100 g-charcoal packet inside a MA package seemed not to last long enough for quality maintenance of 'Fuji' apples stored at $0^{\circ}C$ for three months. During extended storage, ethylene and $CO_2$ levels were not significantly reduced by charcoal treatment. Nevertheless, absorption of carbon dioxide appeared to alleviate the incidence of $CO_2$-related internal browning disorder. Modelling study of practical storage and marketing procedure indicates that 0.19 kg charcoal/day is required to offset $CO_2$ production from 15 kg of apples at $0^{\circ}C$. The amount of charcoal should be increased to 3.10 kg/day if ethylene is a target gas. From the practical point of view, the results suggest that charcoal could be used only for small unit packages for a short period.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.1
• /
• pp.115-121
• /
• 2009

It is to use effectively for stream channel and watershed management as the prediction and the analysis of bed changes characteristics in the Seomjin river downstream. The necessary data (section, bed composition material, pivot point water elevation, coefficient of roughness) with regard to analysis of the bed changes characteristics were based upon the survey data and analysis results in the Seomjin river maintenance basic plan. The prediction of bed changes was also completed with HEC-6 model. The study results were summarized as follows: The main factor of bed changes in the Seomjin river downstream can be decided by extreme extraction of bed aggregate rather than the change of hydrological data. According to the analysis of bed stability based on the relation between friction velocity and representative grain size, and the relation between dimensionless tractive force and representative grain size, the Seomjin river downstream appears to be increased overall. The bed composition material in the stream channel of the Seomjin river of 2003 year shows higher composition rate of gravel and lower composition rate of sand as compared to those of 1989 year. According to result that the prediction of bed changes, it is estimated that the bed will be risen approximately 1.5 m to the place up to 9 km from the estuary, have been repetitively risen and fallen up to 1 m to the place between $9{\sim}21\;km$ section, and fallen about 0.5m to the place between $22{\sim}25\;km$ section. As a result, the bed of the Seomjin river downstream can be decided to be risen gradually. However, since the prediction of this study is based on the assumption that there will be no forced aggregate picking, the bed changes can be much greater than expected when there is a massive aggregate picking as it had happened before.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3336-3344
• /
• 2014

The purpose of this study is small scale coagulation module is developed and demonstrated through a lab-scale test. Recent as a sewage treatment rate increases, have heightened the interest in the necessity on the nonpoint source and developing a small processing unit has been increased. Coagulation sedimentation module in this study is additional growth of floc through swirling in the outside zone, reduction of microstructure floc number and the internal settling zone through vertical/level flow complex sedimentation method after the coagulation process precipitation method as an effective high separation efficiency can be divided was also assessed. Coagulation sedimentation module can increase the load factor was 4.4 times compared to conventional clarifier base on the same volume and surface area through vertical/level flow. In this study, this process was selected formation and maintenance of swirling and uniform flow distribution in the internal settling zone as an important design factor, to derive its FLUENT was used to characteristics of the flow model. Through the simulation of swirling, influent velocity, dimensions of external basin, hopper depth of bottom cone was determined and through analysis of velocity distribution, flow distribution detailed specifications are derived like as diameter and number of effluent hole. Lab-scale($120{\ell}/hr$) test results, influent of 300~800 NTU to less than 10 NTU without polymer feeding was able to operate in the 20minutes retention time(surface loading rate $37.3m^3/m^2$-day), and through analysis FLUENT the possibility of using design parameters were derived.

• The KIPS Transactions:PartD
• /
• v.10D no.2
• /
• pp.233-246
• /
• 2003

The mediator-based system integrates heterogeneous information systems with the flexible manner. But it does not give much attention on the query optimization issues, especially for the query reusing. The other thing is that it does not use standardized metadata for schema matching. To improve this two issues, we propose mediator-based Distributed Information Integration System (DIIS) which uses query caching regarding performance and uses ISO/IEC 11179 metadata registry in terms of standardization. The DIIS is designed to provide decision-making support, which logically integrates the distributed heterogeneous business information systems based on the Web environment. We designed the system in the aspect of three-layer expression formula architecture using the layered pattern to improve the system reusability and to facilitate the system maintenance. The functionality and flow of core components of three-layer architecture are expressed in terms of process line diagrams and assembly line diagrams of Eriksson Penker Extension Model (EPEM), a methodology of an extension of UML. For the implementation, Supply Chain Management (SCM) domain is used. And we used the Web-based environment for user interface. The DIIS supports functions of query caching and query reusability through Query Function Manager (QFM) and Query Function Repository (QFR) such that it enhances the query processing speed and query reusability by caching the frequently used queries and optimizing the query cost. The DIIS solves the diverse heterogeneity problems by mapping MetaData Registry (MDR) based on ISO/IEC 11179 and Schema Repository (SCR).

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.4
• /
• pp.461-468
• /
• 2021

The role of drones is increasing day by day in smart construction that manages construction sites with 3D data in every life cycles. This is because both the digital surface model (DSM) and the orthoimage obtained for the construction site through the drone are made of point cloud data. This study aims to develop standard work types for drone use in order to systematically utilize drones in expressway construction sites. For the study, two expressway construction sites in Korea were set as test beds, and construction types applicable to drones were derived and verified through a pilot project. As a result of the study, three construction work types were developed for road planning, road design and maintenance, respectively, and in road construction, twenty-one detailed construction types were developed for five construction work types. It is expected that drones can be used more systematically not only at expressway construction sites, but also at other road construction sites by utilizing the "standard work type at expressway construction site for drone use" developed in this study.

• Journal of Korean Society of Water and Wastewater
• /
• v.35 no.5
• /
• pp.323-334
• /
• 2021

Pilot-scale coagulation and sedimentation processes were operated to investigate the T-P (Total phosphorus) removal efficiency. A multiple regression model was also derived to predict the water quality improvement effect with river water characteristics. The inflow rates for the pilot-scale facility were 157-576 m³/day, and the coagulant doses were in the range of 13.7-58.5 mg/L (average 38.9 mg/L) for PAC (Poly alum chloride) and 16.5-62.1 mg/L (average 36.0 mg/L) for alum. The results found that the influent BOD (Biochemical oxygen demand) and T-P concentrations were 4.9 mg/L and 0.115 mg/L, and the removal efficiencies were 52.7% and 59.4%, respectively. T-P removal efficiencies on wet weather days were higher by 10% than dry weather days because influent solids influenced T-P's coagulation process. The pH of river water was 6.9-7.8, and the average pH was 7.3. Although the pH variation was not significant, the trend showed that the treatment efficiency of T-P and PO₄-P removal increased. Thus, the pH range considered in this study seems to be appropriate for the coagulation process, which is essential for phosphorous removal. The T-P removal efficiencies were 19.6-93.3% (average 59.2%) for PAC and 16.4-98.5%(average 55.9%) for alum; thus, both coagulants showed similar results. Furthermore, the average coagulant doses were similar at 42.4 mg/L for PAC and 41.3 mg/L for alum. When the T-P concentration of the effluent was compared by the [Al]/[P] ratio, the phosphorus concentration of the treated water decreased with an increasing [Al]/[P] ratio, and the lowest T-P concentration range appeared at the [Al]/[P] ratio of 10-30. A seasonal multiple regression analysis equations were derived from the relationships between 10 independent and dependent variables (T-P concentration of effluent). This study could help lake water quality maintenance, reduce eutrophication, and improve direction settings for urban planning, especially plans related to developing waterfront cities.

• Korean Journal of Food Science and Technology
• /
• v.53 no.4
• /
• pp.365-374
• /
• 2021

In this study, the effect of enzyme-modified starch used in the preparation of filled hydrogel powder loaded with curcumin (FHP) on redispersibility, thermal and UV stability, and curcumin retention during in vitro digestion was investigated. FHP maintained stability without layer separation when redispersed and showed more stability against UVB than the emulsion powder (EMP). There was no significant difference in the chemical stability of curcumin between rice starch-based filled hydrogel powder (RS-FHP) and enzyme-modified starch-based filled hydrogel powder (GS-FHP). However, the gel matrix of GS-FHP maintained greater stability of lipid droplets in the stomach compared to RS-FHP, thereby improving the retention rate of curcumin after in vitro digestion. GS-FHP could be used as a novel material for developing premixes that require stable formulation and maintenance of functional substances, as it can increase the dispersion stability and retention rate of functional substances after digestion.