• Journal of the military operations research society of Korea
• /
• v.31 no.2
• /
• pp.45-59
• /
• 2005

As more advanced and complicated equipments are introduced, effective operation and maintenance, along with acquisition of the equipments, commands more significance lately. In order to perform effective depot maintenance, the Republic of Korea Army is continually developing the concept, cycle and method for operating the depot maintenance. Not only the high-cost testing and maintenance equipments but the highly developed maintenance technologies are required for the depot maintenance of the latest weapon system. In order to have the depot maintenance capability, this paper provides the standard and procedure for estimating the development cost of the depot maintenance elements to be utilized in the depot maintenance elements development project.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.26 no.2
• /
• pp.68-75
• /
• 2018

A flare from an Air Force fighter was abnormally dispensed during the landing. To determine the cause of the abnormal dispensing, fracture analysis, signal analysis and reproduction experiments based on physics of failures were performed. The primary cause of the failure was analyzed to be due to an intermittent fault of an internal circuit card in the AN/ALE-40 chaff/flare dispenser by a broken lid of a capacitor, and the root cause which had derived the primary cause was considered to be an improper handling during the domestic maintenance which were changed from the overseas maintenance due to the DMSMS problem. Therefore, the overall process of the maintenance capability development system was reviewed and alternative ways that considers maintenance error decision aid(MEDA) for system improvement were suggested to prevent further failures.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.01a
• /
• pp.273-274
• /
• 2020

본 논문에서는 부가가치가 높은 군용 장비류의 해외정비품을 국내정비로 전환하기 위한 절차 중 최종 성능평가 절차를 제안하였다. 기존의 절차는 해외정비품의 성능시험을 위한 정비능력 개발시 개발된 국산화 시험장비의 유효성 검증을 위한 명확한 절차가 마련되지 않아 소요군 혹은 실무자에 따라 최종성능평가의 기준이 다른 점이 발생하였다. 따라서 본 연구에서는 통일화된 절차를 연구하여 제안하였다. 제안한 이 절차는 통일된 기준 마련을 통해 해외도입 시험장비와 국산화된 시험장비의 상호 같음을 검증하여 해외로 나가는 정비대상품을 국내정비로 전환하였을 때 품질면에서 동일함을 보증하기위한 중요한 수단이 될 것이라 기대한다.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.53 no.1
• /
• pp.57-62
• /
• 2011

Block Grants System to the agriculture sector has been started from 2010. This paper has been studied for the effective Integrated Rural Development under Block Grants System. For this, project evaluation items and indicators (PEI) were studied by internal and external example and specialist questionnaire on project evaluation. As the result of study, necessity of project, faith of project, efficiency of project, utilization of resources and operating capability were established in planning step, and most important PEI was established the necessity of project. And in enforcement step, performance result, monitering, capability, achievement and maintenance were established, and most important PEI was established performance results. Finally, monitering, capability, achievement and maintenance were established in completion step.

• International Journal of Railway
• /
• v.3 no.4
• /
• pp.113-116
• /
• 2010

In modern conditions of world economic development the integral element of stable social and economic development of the separate countries of the world is the level of their transport infrastructure development, on the one hand capability to effectively provide economic communications between regions inside the country, and capability to integrate into world economic. The condition of a transport infrastructure and its possibility in sphere of maintenance of national participants of foreign trade are reflected in many respects on competitiveness of production, made by them, in the world market and, as consequence, on a country role in economic.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.1319-1322
• /
• 2003

KAERI is developing the Advanced Spent Fuel Conditioning Process (ACP) as a pre-disposal treatment process for spent fuel. Equipment used for such a spent fuel recycling and management process must operate in intense radiation fields as well as in a high temperature. Therefore, remote maintenance has a played a significant role in this process because of combined chemical and radiological contamination. Hence suitable remote handling and maintenance technology needs to be developed along with the design of the process concepts. To do this, we developed the graphic simulator for the ACP. The graphic simulator provides the capability of verifying the remote operability of the process without fabrication of the process equipment. In other words, by applying virtual reality to the remote maintenance operation, a remote operation task can be simulated in the graphic simulator, not in a real environment. The graphic simulator will substantially reduce the cost of the development of the remote handling and maintenance procedure as well as the process equipment, while at the same time producing a process and a remote maintenance concept that is more reliable, easier to implement, and easier to understand.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.363-366
• /
• 2004

KAERI is developing the Advanced Spent Fuel Conditioning Process (ACP) as a pre-disposal treatment process for spent fuel. In this process, the management process must operate in intense radiation fields as well as in a high temperature. Therefore, remote maintenance has played a significant role in this process. Hence suitable remote handling and maintenance technology needs to be developed along with the design of the process concepts. To do this, we developed the digital mockup for the ACP. The digital mockup provides the capability of verifying the remote operability of the process without fabrication of the process equipment. In other words, by applying virtual reality to the remote maintenance operation, a remote operation task can be simulated in the digital mockup. Through utilizing this graphic simulation in this digital mockup, general guidelines can be established for designing equipment intended for remote handling and maintenance. Also, the designer of the equipment that must be remotely maintained should ensure that there is adequate access to the process equipment. The graphic simulator will substantially reduce the cost of the develo363pment of the remote handling and maintenance procedure as well as the process equipment.

• Journal of Information Technology Applications and Management
• /
• v.15 no.3
• /
• pp.209-225
• /
• 2008

The purpose of this study is to examine the relationship between IT human capability and knowledge transfer and the role of absorptive capacity between them. From the test of both measurement and structural model using Partial Least Squares (PLS), IT human capability is found to be significant to absorptive capacity and knowledge transfer. Absorptive capacity is also significantly related to knowledge transfer. The interesting result found in this study is that the path of absorptive capacity drawn from IT human capability to knowledge transfer is stronger than the direct relationship between IT human capability and knowledge transfer, indicating that absorptive capacity plays an important role in knowledge transfer. This result indicates that IT personnel with stronger technical skill, interpersonal skill and management capability are more likely to acquire and learn knowledge effectively from outside expertise. Moreover, this study shows that absorptive capacity, the individual’s ability to utilize external knowledge is derived from IT human capability and strongly effects on transferring knowledge from outsourcing vendors. This study suggests IT related managers that the development of IT human capability and absorptive capacity should be recognized for a successful exploitation of outside knowledge within a firm. It is also a necessary condition for a successful IT implementation and maintenance independently and economically from outside vendors.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.21 no.46
• /
• pp.229-240
• /
• 1998

In these days, we are facing the needs of the times that the product have to be converted from quantity to quality. Most companys now pay more attention to maximize efficiency of facilities with introducing high priced equipments, those equipments are too automated and electronic that partial failure or short time stop leads to the stop of producing process in the whole factory. Consequently, effective maintenance management of production equipment becomes a only solution against problems. This thesis develops a preventive maintenance software that grasp a failure sign through daily inspection with management item, Machine-Capability index and estimate a trend, determine the time of preventive maintenance. The software is useful to the plant operator in analyzing information easily and controlling preventive maintenance operations efficiently.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.205-219
• /
• 2004

The remote operation of the Advanced Spent Fuel Conditioning Process (ACP) is analyzed by using the 3D graphic simulation tools. The ACP equipment operates in intense radiation fields as well as in a high temperature. Thus, the equipment should be designed in consideration of the remote handling and maintenance. As well as suitable remote handling and maintenance technology needs to be developed along with the design of the process concepts. To develop such remote operation technology, we developed the graphic simulator which provides the capability of verifying the remote operability of the ACP without fabrication of the process equipment. In other words, by applying virtual reality to the remote maintenance operation, a remote operation task can be simulated in the graphic simulator, not in the real environment. The graphic simulator will substantially reduce the cost of the development of the remote handling and maintenance procedure as well as the process equipment, while at the same time developing a remote maintenance concept that is more reliable, easier to implement, and easier to understand.