• 콘크리트학회논문집
• /
• 제13권2호
• /
• pp.99-106
• /
• 2001

이 연구의 목적은 기존의 단순지지로 더블티 슬래브에 발생하는 과도한 모멘트, 슬래브 깊이, 중앙부 처짐, 단부 균열의 발생 원인을 근원적으로 해결할 연속화된 개량조인트를 개발하는데 그 초점을 두었다. 개량조인트는 다음과 같은 장점을 얻을 수 있다. 먼저, 보중앙 정모멘트의 감소로 인하여 적용하중에 대한 설계스팬을 증가시킬 수 있으며, 슬래브의 처짐을 감소시킬 수 있다. 또한, 기존 더블티공법의 문제점인 더블티와 역티사이의 연결부 균열을 감소시킬 수 있으며, 시공시 부가적인 거푸집을 필요로 하지 않는다. 개선된 더블티의 댑단부와 직사각형보를 연결부 시험체를 활용하여, 길이철근 배근량을 변수로한 정적 3점재하 실험에서 전단력과 모멘트에 대한 거동을 평가하였다. 이 연구의 범위 안에서 다음과 같은 결론을 얻을 수 있다. 개량댑에 의한 연결 부의 연속화는 토핑 콘크리트에 길이 방향 철근을 배근함으로써 효과적으로 구할 수 있으며, 더블티 슬래브의 스팬용량을 증 가시키고 처짐을 일반적으로 감소시킨다. 아울러, 개량댑의 연속화는 단순지지 연결부보다 초기균열에 효과적인 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.335-340
• /
• 2002

The focus of this experimental study is to verify the effect of openings in reinforced concrete deep beam. Main variables are opening depth, width and vertical locations but the shear span-to-overall depth ratio was fixed by 0.5. The experimental results about 8 deep beams which was tested under two equal symmetrically placed point loads are reported.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1999년도 학회창립 10주년 기념 1999년도 가을 학술발표회 논문집
• /
• pp.541-544
• /
• 1999

The main objective of this study is to develope the PSC-I girder for long span bridge. This study investigates the structural behavior of Postcracking stage and efficiency of proposed PSC-I girder using 1/2 scaled prototype beam specimen. Three specimens are tested under three point static loading system. Ideally, the Load-displacement relationship is trilinear. The crack patterns and failure mode of each specimen are reported in this paper and they are compared to each other with ductility and strength.

• 한국안전학회지
• /
• 제7권4호
• /
• pp.115-128
• /
• 1992

The main purpose of this study was to determine whether the inelastic moment-rotation character-istics defined by the lower-bound curve permit economical ALFD for noncompact plate gilders. The study was also intended to determine the benefits of improving the moment-rotation to illustrate the ar plication of the ALFD to noncompact plate girders and to show the Influence of various parameters on the design process. To accomplish these objectives, 34 preliminary designs were made by ALFD or LFD or WSD. In the study, this method of analysis is described first. Next, the design procedures are described. Finally, the resulting designs are presented and discussed.

• 한국구조물진단유지관리공학회 논문집
• /
• 제12권1호
• /
• pp.167-174
• /
• 2008

최근 국내에서 장대교량의 건설이 증가함에 따라 그에 대한 내진설계의 중요성도 증대되고 있다. 이와같은 여건을 반영하여 새로 개정된 케이블 강교량 설계지침(안)의 내진설계편에서 지진파의 파동전달효과와 지반특성효과를 일부 반영하였다. 본 연구에서는 국내 설계규정에 따라 사장교(주경간500m)의 다양한(균등입력, 파동전달효과, 파동전달효과+지반특성효과) 지진응답해석을 수행하여 설계적용시 문제점에 대하여 검토해 본 결과 장대교의 파동전달효과는 지지점간 거리가 짧은 경우에도 지반이 연약한 경우 큰 영향을 받는 것으로 나타났다. 한편 지반의 종류에 상관없이 파동전달효과와 함께 지점별로 지반특성을 고려한 해석이 그렇지 않은 해석결과보다 큰 값이 산출되었다. 따라서 장대교의 지진응답해석시 파동전달효과 및 지반특성효과의 적용에 대한 세심한 고려가 필요한 것으로 판단된다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.196-201
• /
• 2004

Aerodynamic characteristics of three-dimensional wings in ground effect for Aero-levitation Electric Vehicle(AEV) are numerically investigated for various ground clearances and wing spans at the Reynolds number of $2\times10^6$. Numerical results show that a sizeable three-dimensional flow separation occurs with formation of an arch vortex at the junction of main and vertical wings, and that this is conjectured a primary cause for the high lift-to-drag(L/D) reduction rate of the main wing, when the wing span is decreased. Improvements on L/D ratios of the wings with small spans are pursued by breaking the coherence of superimposed adverse pressure gradients at the wing junction.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.224-228
• /
• 1995

Addition of hooked steel fibers into the cementitious materials enhanced shear resistance and consequently improves structural behavior and shear strength of reinforced hooked steel fibrous concrete beam(RHSFCB) under the shear forces. Experimental observations were made on the main parameters effecting structural behavior of RHSFCB in this study. The volume fractions of fibers, shear span to depth ratios, and spacings of stirrups were taken into account as the main parameters. Some equations reported in the literatures, regarding the predictions of the shear strength of RHSFCB have been evaluated statistically based on the total number of 95 test results on RHSFCB failed in shear on shear-flexural mode.

• Structural Engineering and Mechanics
• /
• 제40권5호
• /
• pp.705-718
• /
• 2011

The aim of the investigation described in this paper is to study the nonlinear parametric vibrations and stability of a simply-supported viscoelastic beam with an intra-span spring. Taking into account a time-dependent tension inside the beam as the main source of parametric excitations, as well as employing a two-parameter rheological model, the equations of motion are derived using Newton's second law of motion. These equations are then solved via a perturbation technique which yields approximate analytical expressions for the frequency-response curves. Regarding the main parametric resonance case, the local stability of limit cycles is analyzed. Moreover, some numerical examples are provided in the last section.

• Wind and Structures
• /
• 제1권1호
• /
• pp.67-75
• /
• 1998

Tiger Gate Bridge, a steel suspension bridge with a main span of 888 m and a stiffening box girder, is located at the Pearl River Estuary, Guangdong Province, one of the typhoon-prone area in China. Focusing on the developing of the full aeroelastic model of the bridge and simulation of the wind field of the bridge site in a large boundary wind tunnel at Tongji University, Shanghai, China, some main results about the wind resistant properties of the bridge including aerodynamic instability, buffeting responses both being in operation and erection stages by using of a full aeroelastic model wind tunnel testing are introduced. Some of analytical approaches to those aerodynamic behaviours are also presented, and compared with experimental data of the testing.

• Structural Engineering and Mechanics
• /
• 제78권2호
• /
• pp.199-207
• /
• 2021

In the present paper, an analytical model is proposed to determine the flexural and shear strength of normal and high-strength reinforced concrete beams with longitudinal bars, in the presence of transverse stirrups. The model is based on evaluation of the resistance contribution due to beam and arch actions including interaction with stirrups. For the resistance contribution of the main bars in tension the residual bond adherence of steel bars, including the effect of stirrups and the crack spacing of R.C. beams, is considered. The compressive strength of the compressed arch is also verified by taking into account the biaxial state of stresses. The model was verified on the basis of experimental data available in the literature and it is able to include the following variables in the resistance provision: - geometrical percentage of steel bars; - depth-to-shear span ratio; - resistance of materials; - crack spacing; - tensile stress in main bars; - residual bond resistance including the presence of stirrups;- size effects. Finally, some of the more recent analytical expressions able to predict shear and flexural resistance of concrete beams are mentioned and a comparison is made with experimental data.