• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.781-796
• /
• 2015

This study was carried out to investigate the effect of no-tillage and split irrigation on the growth of pepper plant under green house condition in Jeonnam province. Moisture content of soil at whole quantity irrigation in tillage was increased rapidly regardless of soil depth for initial irrigation and then was decreased continuously until next irrigation. Deviation of moisture content in soil was decreased with increasing depth of soil. Moisture contents of top soil and subsoil (20 cm) at whole quantity irrigation in no-tillage were increased with sunrise, and then decreased with sunset. Moisture contents of top soil in tillage, and top soil and subsoil (20 cm) in no-tillage at half quantity irrigation indicated a cyclic diurnal variation by evapotranspiration. Salinity of soil was increased after initial irrigation and then was decreased continuously until next irrigation. With increasing depth of soil, increases of salinity in soil was delayed. Salinity of top soil in no-tillage was increased between AM 11:00 and AM 12:00, and then showed the highest level between PM 2:00 and PM 6:00 on a cyclic diurnal variation by evapotranspiration. Salinity of subsoil (30 cm) in no-tillage was not measured a cyclic diurnal variation. Moisture content and salinity of soil was positive correlation regardless of tillage and no-tillage cultivation. Growth of pepper in no-tillage cultivation was higher than that in tillage cultivation. Main branch Length and stem diameter of half quantity irrigation plot was higher than that of whole quantity irrigation plot regardless of tillage and no-tillage cultivation. After harvesting, the number of pepper fruits of half quantity irrigation plot was increased remarkably by 49% and 47%, in tillage and no-tillage cultivation, respectively. Pepper yield of no-tillage cultivation plot was higher by 8% than that of tillage cultivation plot. Pepper yield of half quantity irrigation plot was increased remarkably by 36% and 39%, in tillage and no-tillage cultivation, respectively.

• Journal of Animal Science and Technology
• /
• v.63 no.1
• /
• pp.91-103
• /
• 2021

To improve the fermentation quality of silage and reduce the nutrients loss of raw materials during the ensiling process, silage additives are widely used. The effect of additives on silage is also affected by the species of crop. Therefore, this study was designed to explore the effects of formic acid (FA) and lactic acid bacterial inoculant on the quality of main summer crop silage. The experiment was consisted on split-plot design with three replications. The experiment used the main summer forage crops of proso millet ("Geumsilchal"), silage corn ("Gwangpyeongok"), and a sorghum-sudangrass hybrid ("Turbo-gold"). Treatments included silage with Lactic acid bacterial Inoculant (Lactobacillus plantarum [LP], 1.0 × 106 CFU/g fresh matter), with FA (98%, 5 mL/kg), and a control (C, without additive). All silages were stored for 60 days after preparation. All additives significantly increased the crude protein content and in vitro dry matter digestibility (IVDMD) of the silages and also reduced the content of ammonia nitrogen (NH3-N) and pH. Corn had the highest content of IVDMD, total digestible nutrients and relative feed value among silages. Compared with the control, irrespective of whether FA or LP was added, the water soluble carbohydrate (WSC) of three crops was largely preserved and the WSC content in the proso millet treated with FA was the highest. The treatment of LP significantly increased the lactic acid content of the all silage, while the use of FA significantly increased the content of acetic acid (p < 0.05). The highest count of lactic acid bacteria (LAB) was detected in the LP treatment of corn. In all FA treatment groups, the total microorganism and mold numbers were significantly lower than those of the control and LP groups (p < 0.05). In conclusion, both additives improved the fermentation quality and nutritional composition of the main summer forage crops. The application of FA effectively inhibited the fermentation of the three crops, whereas LAB promoted fermentation. So, both FA and LP can improve the quality of various species of silage.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.351-355
• /
• 2003

Response surface methodology was employed to study the interactive effect of sucrose, nitrogen, temperature and to optimize their levels to enhance the production of human granulocyte-macrophage colony-stimulation factor from Nicotiana tabacum cell suspension cultures. A 15-runs Box-Behnken design including three center points was the response surface method selected for the initial set of experiments. The analysis of the data from the Box-Behnken experiments showed interactive effects of sucrose:nitrogen, sucrose:temperature and nitrogen:temperature. The optimal combinations of sucrose, nitrogen and temperature for hGM-CSF production from surface plot were sucrose 90 g/L, nitrogen 41 mM and 22$^{\circ}C$, respectively. The optimization of there factors enhanced the hGM-CSF production by 2 times because high sucrose concentration stimulated the secretion of hGM-CSF and low temperature prevented hGM-CSF degradation in media by pretenses.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.11 no.2
• /
• pp.108-115
• /
• 1991

A field experiment was conducted to evaluate the effects of cattle compost application on the change of soil physical properties and their relationship to yield performance of selected main forage crops. Maize(CV. Suweon 19) and sorghum hybrids(CV. Pioneer 9'31) as a summer crops and winter rye were grown on newly reclaimed red yellow soils(Fine loamy, Typic Hapludults) under different application rate of cattle compost associated with chemical NPK fertilization, from Oct. 1986 to Sept. 1989. Experimental field was laid down as a split plots design with four replications. The results obtained are summarized as follows: 1. Cattle compost application reclaimed soil physical propeties, such as formation of granular structure and water holding capacity, and it result in a great increase of plant growth and the rate of dry matter accumulation. 2. While cattle compost treatment reduced the portion of soild phase of the three phase constituents of soils, it increased the portion of air phase and liquid phase comparatively. 3. Organic matter, N, P, K, and mineral content in soil were markedly increased in the plot treated with compost. 4. Cattle compost application increased fodder production both in maize-rye and sorghum hybrids-rye cultivation. Annual dry matter yield of maize-rye cropping was 2183(NI'K only), 2425(NPK+compvst 3000 kg) and 2800kg/lOa(NPK + compost 6000kg/10a).

• Journal of the Korean Society for Precision Engineering
• /
• v.31 no.1
• /
• pp.35-42
• /
• 2014

Recently, in industry field, many researchers are looking for ways to reduce the use of lubricant because of environmental and economical reasons. MQL lubrication is one of many lubrication technologies. The aim of this study is to evaluate the machinability considering lubrication methods and taper angles of workpieces for turning of SCM440. Workpieces of two shapes such as workpiece with and without taper angle are used. And two lubrication methods such as MQL and Wet have been considered. And cutting force and surface roughness are used as characteristic values. Cutting speed, feed rate, injection angle and distance are used as design parameters. The characteristic values were statistically analyzed by Taguchi method. From the results, main effects plot and importance of each parameter according to conditions are analyzed. Finally, this study has been suggested the optimum machining conditions according to the lubrication methods, machining conditions and shape of workpiece.

• Journal of Plant Biology
• /
• v.17 no.3
• /
• pp.127-136
• /
• 1974

The effect of potassium metabolism on the soybean leaves was studied with comparison of other elements during the successive growing period. The results were as follows; 1. The percentage of potassium content showed remarkable increase not only in the first compound leaf at a stage which was growing vigorously and producing new leaves, but also in the fifth compound leaf at a stage which was taking a active metabolism of nitrogen and carbohydrate but not producing new leaves. However, the percentage of potassium content was decreased in the second compound leaf than in the first one. Such a result could be regarded as a potassium removal from mature leaves into immature and flowing out from stoma through respiration. During the pod-development the percentage of potassium content in the soybean leaf was decreased. 2. If nitrogen, phosphorus and potassium were added excessively in the nutrient solution, the percentage of potassium content in the soybean leaf had increased. The effects of these elements showed a remakable increase in the excessive plot of nitrogen than in that of phosphorus. At early stage the redtarded effect of phosphorus on the growth of soybean could be covered by potassium, however, at late stage it could not. The growth of soybean plant was much more inhibited by potassium, compared with nitrogen and phosphorus. New leaves could not be produced in the potassium deficient soybean plant after the third compound leaf. The normal growth of soybean plant could not be observed if only one element was excessively added to the culture solution, compared with the deficiency of other two elements.

• Journal of Welding and Joining
• /
• v.32 no.1
• /
• pp.53-60
• /
• 2014

The automatic arc welding is generally accepted as the preferred joining technique and commonly chosen for assembly of large metal structures such as in areas of automotive, aircraft and shipbuilding due to its joint strength, reliability, and low cost compared to other joint processes. Recently, several mathematical models have been developed and studied for control and monitoring welding quality, productivity, microstructure and weld properties in arc welding processes. This study indicates the prediction of process parameters for the expected welding quality with accordance to the adaptive GTA welding process. Furthermore, the mathematical models is also develop to aid the selection of an optimal welding process as the generation of process controls to predict the bead geometry as a function output parameters in the GTA welding process. The developed models through this study showed comparatively excellent predicted results, and will extend to other welding processes to integrate an optimized system for the robotic welding process.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.6
• /
• pp.87-94
• /
• 2019

South Korean films narrate exquisitely, express emotions implicitly and employ magnificent images, exemplifying unique oriental aesthetics. This paper takes Along with the Gods: The Two Worlds (2017) as an example to analyze the meaning of oriental aesthetics in South Korean films using the Film Narrative Theory. It is a fantasy blockbuster depicting family kinship stories. It structures with the familiar karma and reincarnation of Asian Buddhism with the core of family kinship. Perfectly interpreting the fantasy world of hell with stunning movie effects, it shows the family kinship of families under the main plot line of a horror film.

• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.630-635
• /
• 2000

Previous research has not evaluated the effects of various rates and frequencies of manure application and frequencies of cutting on yield and stand persistence of cool-season grasses and alfalfa-grass mixtures. The primary objective of this study was to compare the effects of cutting management systems on herbage yield and stand persistence of orchardgrass (Dactylis glomerata L.) and an alfalfa (Medicago sativa L.)-orchardgrass mixture from various rates and frequencies of dairy slurry application. A randomized complete block design with treatments in a sub-subplot arrangement with four replicates was used. The main plot consisted of 2 cutting management systems (4 and 5 annual cuttings). The subplots were 9 fertility treatments: 7 slurry rate and frequency of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The split-split-plots were the two forage species: orchardgrass and alfalfa-orchardgrass mixture. The study was initiated after 1st cutting in 1995. Cumulative yields of the 2nd and subsequent cuttings of both orchardgrass and alfalfa-orchardgrass in 1995 were higher for the 5-cutting system than the 4-cutting system. The 1995 growing season was abnormally dry. In 1996, an abnormally wet year, the reverse was true, total herbage yields being higher for the 4-cutting system than the 5-cutting system. Species response to fertility rate/frequency treatments was different in both years. Higher application rates early in the season and carryover of nutrients from late season applications the previous year appear to be responsible for the yield increases of those fertility treatments having significant yield differences between the cutting management systems. The stand ratings of orchardgrass were not affected by cutting management. In the spring of 1997, however, the stand ratings of alfalfa-orchardgrass in the 4-cutting management system were significantly greater than the 5-cutting management system. The very high manure application rate significantly reduced the stand ratings of alfalfa-orchardgrass in the 5-cutting system.

• Journal of the Korean Ceramic Society
• /
• v.44 no.8
• /
• pp.451-456
• /
• 2007

This paper presents results and observations obtained from a study of sintering behavior and crystallization in $Li_2O-Al_2O_3-SiO_2$ (LAS) Glass by screen printing method. The variable experimental conditions were determined carefully by Thermal-Mechanical Analyzer (TMA), Differential Thermal Analyzer (DTA) for setting the optimum transparent sintering conditions in LAS glass system, $10.5Li_2O-14.7Al_2O_3-58.1SiO_2-16.7B_2O_3(wt%)$, such as glass-ceramics which usually have low crystallization temperatures. Crystallization glasses generated during sintering was observed from diffraction patterns by X-Ray Diffraction (XRD), transmittance by UV-Vis spectrometer. Finally, the optimum sintering condition of LAS glass and the relation between factors and results in several sintering conditions were given by using Response Surface Methodology (RSM). From this study, we confirmed that crystallization interrupted densification during glass powder sintering. Furthermore, we observed that main effect of factors in glass powder sintering with concurrent crystallization depended on experimental conditions from main effects plot by MINTAB-14.