• Journal of Positioning, Navigation, and Timing
• /
• 제12권4호
• /
• pp.335-342
• /
• 2023

Lunar Navigation Satellite System refers to a constellation of satellite providing PNT services on the moon. LNSS consists of main satellite and navigation satellites. Navigation satellites orbiting around the moon and a main satellite moves the area between the moon and the L2 point. The navigation satellite performs the same role as the Earth's GNSS satellite, and the main satellite communicates with the Earth for time synchronization. Due to the effect of the non-uniform shape of the moon, it is necessary to focus on the influence of the lunar gravitational field when designing the orbit simulation for navigation satellite. Since the main satellite is farther away from the moon than the navigation satellite, both the earth's gravity and the moon's gravity must be considered simultaneously when designing the orbit simulation for main satellite. Therefore, the main satellite orbit simulation must be designed through the three-body problem between the Earth, the moon, and the main satellite. In this paper, the orbit simulation tool for main satellite and navigation satellite required for LNSS was designed. The orbit simulation considers the environment characteristics of the moon. As a result of comparing long-term data (180 days) with the commercial program GMAT, it was confirmed that there was an error of about 1 m.

• 대한인간공학회지
• /
• 제32권1호
• /
• pp.97-106
• /
• 2013

Objective: The aim of this study is to investigate the attributing factors influencing team performance. Background: Technically, it is necessary that operators adapt themselves to computerized and advanced techniques to operate the main control rooms safely in nuclear power plant in Korea. The more main control rooms are digitalized, the more important for operators to have high team performance it is. Method: This paper analyzes team process through literatures review and elicits team performance shaping factor. Especially, the objective of this research is to elicit communication using common team performance shaping factors. Results: This study has found communication through team performance shaping factors in Main Control Room of the SMART. Conclusion: This paper can offer a starting point for team communication, which can use team performance shaping factor framework that are emerging in these new nuclear power plant. Application: As a result, I expect that the evaluation communication for MCR operator's team performance will lead the operating techniques in nuclear power industry internationally.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.514-520
• /
• 2015

The effects of suspension stiffness on the reaction load of the gearbox suspension for a three-point suspension wind turbine drive train were investigated by finite element analysis. The reaction forces of the gearbox suspension appear to increase as the gearbox suspension stiffness increases; however, the main bearing stiffness has a reverse effect on the reaction forces. The influence of the gearbox suspension stiffness is greater than that of the main bearing. Since the suspensions must provide the gearbox with proper support, it is not practical to use soft gearbox suspension for small reaction forces. It is more feasible to use stiff main bearings. As a guideline for the main bearing stiffness in the present study, we propose a relative stiffness of 100-150% of the reference.

• Wind and Structures
• /
• 제25권5호
• /
• pp.433-457
• /
• 2017

As a novel typical wind-sensitive structure, the wind load and wind-induced structural behaviors of super-large straight-cone cooling towers are in an urgent need to be addressed and studied. A super large straight-cone steel cooling tower (189 m high, the highest in Asia) that is under construction in Shanxi Power Plant in China was taken as an example, for which four finite element models corresponding to four structural types: the main drum; main drum + stiffening rings; main drum + stiffening rings + auxiliary rings (auxiliary rings are hinged with the main drum and the ground respectively); and main drum + stiffening rings + auxiliary rings (auxiliary rings are fixed onto the main drum and the ground respectively), were established to compare and analyze the dynamic properties and force transferring paths of different models. After that, CFD method was used to conduct numerical simulation of flow field and mean wind load around the cooling tower. Through field measurements and wind tunnel tests at home and abroad, the reliability of using CFD method for numerical simulation was confirmed. On the basis of this, the surface flow and trail characteristics of the tower at different heights were derived and the wind pressure distribution curves for the internal and external surfaces at different heights of the tower were studied. Finally, based on the calculation results of wind-induced responses of the four models, the effects of stiffening rings, auxiliary rings, and different connecting modes on the dynamic properties and wind-induced responses of the tower structure were derived and analyzed; meanwhile, the effect mechanism of internal suction on such kind of cooling tower was discussed. The study results could provide references to the structure selection and wind resistance design of such type of steel cooling towers.

• 미생물학회지
• /
• 제7권3호
• /
• pp.115-124
• /
• 1969

The mash of Takjoo, Korean flour wine, is fermented through two brewing processes ; the primary brewing process to saccharify and the main one to produce ethyl alcohol. The activities of acid proteinase (pH3), weak acid proteinase (pH 6), and alkaline proteinase (Ph 80 on the processes are determined with time by the Folin phenol method as a strength of casein digestion. Hydrogen ion concentration, the content of total organic acids, protein, free amino acids and oligopeptides, which effect the activities of proteinase, are also measured. The results are briefly summarized as follows : 1. In general, the activities of acid proteinase and weak acid proteinase in the mesh of primary brewing process are stronger than those in main brewing process. 2. The activities of acid proteinase are remarkably stronger than those of weak acid proteinase in both processes. It reveals that they decrease slowly through the fermentation. Activities of alkaline proteinase are weaker than others. 3. As the raw materials are mixtured, the total amount of organic acids is equivalent to 0.150 mg/ml acetic acid in the mesh of primary brewing process and 0.02 mg/ml acetic acid in the main one. They increase gradually with time. 4. Hydrogen ion concnetration shows 3.9 in the mesh of main brewing process and 3.28 in the primary one. They increase to the maximum in 60-72 hrs., and decrease since 108 hrs. 5. The content of crude protein shows 66.90mg/ml in the mesh of main brewing process, while shows 64.29mg/ml in the mesh of primary one. they decrease slowly with time. it seems that a small content of crude protein, as a substrate, converts into amino acids and soluble nitrogen compounds by proteinase. 6. The content of free amino acids and oligopeptides shows 0.36 mg/ml in the mesh of primary brewing process and 0.24mg/ml in the main brewing process. It is evident that the reason they increase continuously through the fermentation is the effect of proteinase. 7. According to the results, the strong activities of proteinase in primary brewing process has been derived from the decrease of hydrogen ion concentration due to the production of organic acids.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.856-860
• /
• 2002

The main objective of this study is to consider the effect of fatigue crack behavior on the variable depth of micro hole defects in SM20C at the symmetric position. The fatigue crack propagation test is performed by rotary bending fatigue test machine. The relationship between crack length(2a), cycles(N) and crack growth rate(da/dN) are investigated in this study. The result from the rotary bending fatigue test under the applied stress at 250MPa turned out that the fatigue life illustrated almost constant when the depth of symmetric micro hole deflects is both part A and B at the hope depth(h) = 0.5mm.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2004년도 춘계 학술대회논문집
• /
• pp.196-201
• /
• 2004

Aerodynamic characteristics of three-dimensional wings in ground effect for Aero-levitation Electric Vehicle(AEV) are numerically investigated for various ground clearances and wing spans at the Reynolds number of $2\times10^6$. Numerical results show that a sizeable three-dimensional flow separation occurs with formation of an arch vortex at the junction of main and vertical wings, and that this is conjectured a primary cause for the high lift-to-drag(L/D) reduction rate of the main wing, when the wing span is decreased. Improvements on L/D ratios of the wings with small spans are pursued by breaking the coherence of superimposed adverse pressure gradients at the wing junction.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.14_15
• /
• 2009

In this paper, the effect of SFCL which was applied on neutral line of main transformer in distribution substation was analyzed in addition to the position of SFCL among some cases which are studied. The result about the limiting current was compared with the effect with SFCL applied on feeder. The limiting current characteristics are similar to the effect of SFCL on feeder. Therefore, this application of SFCL is required to protection coordination such as SFCL is applied on feeder.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.514-518
• /
• 2005

In this paper an adaptive fuzzy PI controller with feedback linearizing meth od is implemented to controlling flux and torque separately in induction motor. In this paper first decoupling of torque and flux which are outputs to be controlled, is achieved by using feedback linearization methodology. Then for reducing the effect of noise and rejection of disturbance, main part of controller which is adaptive PI fuzzy controller, is designed. Coefficients of PI controller are determined by defined fuzzy rules due to error dynamic. Inputs of fuzzy system are defined sliding surfaces which consist of torque and flux errors. The main contribution of this paper is effect reduction of noise and disturbance on torque and flux which is based on fuzzy logic and nonlinear control. At last the effectiveness of the proposed control scheme in presence of noise and load disturbance is simulated and comprised to applying sliding method. The results verify better effectiveness of the proposed method for effect reduction of noise and disturbance.

• International Journal of Human Ecology
• /
• 제8권1호
• /
• pp.9-18
• /
• 2007

This study focuses on the relationship between ethnic identity of Asian-Americans and their appreciation of their ethnic body features, based on reference group theory. A convenience sample of 60 male and 52 female students from various Asian ethnicities attending a mid-western university was used for the study. A 2 (gender) by 2 (ethnic identification) by 2 (socializing group) analysis of covariance (ANCOVA) on body image satisfaction as dependent variable and Body Mass Index score as a covariate was conducted. A significant main effect of ethnic identification was found, which indicates the more respondents identified with their ethnic group, the more likely they were to be satisfied with their appearance. The social group affiliation main effect was not significant. The impact of ethnic identification was significant only for those respondents who socialize more with Americans than with Asians. The results support the idea that one's ethnic group functions as a reference group, which influences body image appraisals.