• 전기학회논문지
• /
• 제65권3호
• /
• pp.520-525
• /
• 2016

In this paper, Characteristic of power conversion unit of a railway vehicles according to contact loss in feeding system that applied impedance of rigid conductor is analyzed. It applied impedance of rigid bar in modeling of electric railway system. Railway vehicles are performed of modeling based on the performance of the electric railway vehicle. Effects of the contact loss in the power conversion unit were analyzed via main transformer of railway vehicle, the input and output voltage characteristics of the converter through contact loss was generated after linking the vehicle with feeding system.

• 동의신경정신과학회지
• /
• 제29권3호
• /
• pp.197-206
• /
• 2018

Objectives: Conversion disorder is combination of clinical symptoms and can be promoted until diagnosis is confirmed. In this case, we used Korean medical psychotherapy, M&L therapy, and Korean traditional medicine for treating a conversion disorder patient. Methods: The patient was diagnosed with conversion disorder, and main complaints were lower limb dysesthesia, and anxiety. We used BAI, BDI, HRV, CSEI-S, MMPI, Drawing room of mind for assessment. We treated the patient with Korean medical psychotherapy with M&L therapy, and Korean traditional medicine including acupuncture, moxa and herbal medicine. Results: After treatment, clinical symptoms improved to 40% compared with first visit and the BAI, BDI, HRV, CSEI-S scores decreased, especially scores for anxiety and depression. Conclusions: Korean medical psychotherapy and M&L psychotherapy can be effective for treating conversion disorder.

• 제어로봇시스템학회논문지
• /
• 제18권7호
• /
• pp.638-643
• /
• 2012

This paper presents an intelligent reduction method for external noise. The main idea comes from PSO-FCM (Particle Swam Optimization Fused fuzzy C-Means) clustering. The data of the target is transformed from the antenna coordinates to the vessel one and to the system coordinates. In the conversion, the overall noises hinder observer to get the exact position and velocity of the maneuvering target. While the filter is used for tracking system, unexpected acceleration becomes the main factor which makes the uncertainty. In this paper, the tracking efficiency is improved with the PSO-FCM and the compensation methodology. The acceleration is approximated from the external noise splitted by the proposed clustering method. After extracting the approximated acceleration, the rest in the noise is filtered by the filter and the compensation is added to after that. Proposed tracking method is applicable to the linear model and nonlinear one together. Also, it can do to the on-line system. Finally, some examples are provided to examine the reliability of the proposed method.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 춘계학술대회
• /
• pp.197-199
• /
• 2018

최근 많은 산업용 기기들은 외부 모니터링과 제어 시스템에 프로토콜 호환성 문제에 직면하고 있다. 본 논문은 산업, 통신 프로토콜 변환과 제어 및 모니터링을 지원하기 위해 메인 제어 보드를 제작하였다. 산업용 통신 게이트웨이 모듈은 CAN 버스 및 이더넷 프로토콜을 지원하도록 설계되었다. 메인 보드 프로세서는 ATMEGA2560 사용하고, 서브 보드 RS485 시리얼 슬롯 4개를 배치하였다. 이들 슬롯을 통하여 아날로그 및 디지털 I/O를 제공하여 제어 및 모니터링에 사용할 수 있다.

• 한국환경교육학회지:환경교육
• /
• 제14권1호
• /
• pp.92-106
• /
• 2001

The main goal of this paper is to suggest a new path to new ecological paradigm in social environmental education. The old paradigm of environmental education consists of two elements. The first element is emphasis on the seriousness and urgency of environmental problems while the second one is the presentation of concrete action programs as solutions of environmental problems. The missing point of this paradigm is the internal process of meaning construction of actors. Any kind of social action must be based on the meaning which the actors gives to their own action. Becoming an environmentally conscious actor, therefore, actor himself needs to interpret the world from the new perspective. In this paper, we call the change of worldview in the deepest sense 'conversion'. Ecological conversion means shift from anthropocentrism to ecocentrism. In the following sections, main characteristics of ecological world view are specified and some examples of ecological confessions which reveal ecological world view are presented. In this last section, 7 ways of lifestyle change which can facilitate ecological conversion are suggested: 1) trying to be alone for a while everyday; 2) making peaceful state of mind; 3) sharpening the 'green sensitivity'; 4) creating slow way of life; 5) choosing voluntary simplicity; 6)raising spirituality; 7) practicing sharing and caring. Social environmental education in the new ecological paradigm could be considered as a starting point towards a civilizational shift from the dominant materialist civilization to the post-material ecological civilization.

• Journal of Power Electronics
• /
• 제10권6호
• /
• pp.777-783
• /
• 2010

In order to drive gas discharge lamps, DC-AC converters with a LCC resonant tank, whose output voltage is adjusted by a variable frequency control are frequently used. However, when they are activated by varying the operating frequency, converters are frequently damaged by unstable operation, due to the rising and falling of the operating frequency near the resonant frequency. To solve this problem, a simple protection circuit for the power supply of a gas discharge lamp is proposed in this paper. This circuit senses the primary current of the main transformer. Using this protection circuit, the operating frequency of the lamp driving inverter system is kept close to and on the right side of the resonant frequency and the inverter is always operated in the ZVS condition. The resulting stable variable frequency operation allows various gas discharge lamps to be tested without the risk of damaging the main switches, because the protection circuit can protect the power MOSFETs of bridge converters from abnormal conditions. The validity and effectiveness of the proposed protection circuit are verified through the experimental results.

• 한국해양공학회지
• /
• 제19권6호통권67호
• /
• pp.1-7
• /
• 2005

This paper deals with the design and aerodynamic analysis of a special-type impulse turbine, with an end plate for wave energy conversion. Numerical analysis was performed using a CFD code, FLUENT. The main idea of the proposed end plate was to minimize the adverse effect of tip clearance of turbine blade, and was borrowed from ducted propeller, with so-called penetrating end plate for special purpose marine vehicles. Results show that efficiency increases up to $5\%$, depending on the flow coefficient; a higher flow coefficient yields increased efficiency. Decrease of input coefficient CAwith an end plate is the main reason for higher efficiency. Performance of end plate at various design parameters, as well as flow conditions, was investigated; the advantages and disadvantages of the presentimpulse turbine were also discussed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.292-294
• /
• 2007

Recently, for satisfying many application demands such as coding delay, computing power, transporting channel characteristic, etc, many profiles are supported in video coding standards. Therefore, in transcoding between same standards or between other standards, the functional difference of profiles supported by application occur many problems. In this paper, transcoding MPEG-2 main profile to H.264/AVC baseline profile which has restriction in the number of reference frame is focused. In this case, the bidirectional prediction supported in MPEG-2 main profile is not supported in H.264/AVC baseline profile. Also, in the restriction of reference frame, motion vectors in the MPEG-2 decoder as predictor should be adjusted. In this paper, the proposed algorithm is based on the characteristic of which motion. vector is uniform according to the distance from reference frame. The adaptive search techniques through the determination of the uniformity extremely reduce the computational complexity.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제53권11호
• /
• pp.572-576
• /
• 2004

Various devices for diagnosing arrester soundness are suggested, and most of them simply measure magnitude of leakage current. However, such kind of devices do not provide detailed information needed for the diagnosis. In this study, we designed and fabricated a new arrester analyzer by means of measuring the magnitude, the phase vs. wave height and the harmonics of total leakage currents. The analyzer is composed of a current detector, an optical linker, and a main device operated by a microprocessor. The main device is connected with leakage current detector optically not to be influenced by electromagnetic interference. The analyzer developed measures only total leakage currents, but analyzes most parameters needed for the arrester diagnostics.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 학술회의 논문집 정보 및 제어부문 A
• /
• pp.35-42
• /
• 2003

We have studied DC energy conversion of RF card by wireless communication. In order to attain an objective, it used the system which is a Rectenna. The main purpose of energy conversion system is the operation of the circuits at RF-ID system. The proposed RF-ID system is a lot classified with the reader and tag. Reader is a kind of the base station role supporting RF energy. And priority tag convert RF energy from the reader it was delivered with a wireless to DC energy. The energy which is converted like Tag. It transmits to the reader characteristic ID of each card. The tag is mainly divided into rectifier, power module, memory and controller. The FRAM maintains the data like a ROM in no-power situation. And the advantage is a low power element compared with other EEPROM. There are two considerations, when RF energy is converted into DC source by wireless. One is energy amount supported from the reader, the other is high power efficiency. This paper presents a study of simulation and experiments on the RF-DC conversion circuit in tag by the power efficiency concentrated.