• Journal of the Korea Concrete Institute
• /
• v.14 no.6
• /
• pp.982-988
• /
• 2002

Current design equations for shear strength of reinforced concrete columns generally overestimate the shear strength contribution by the circular transverse reinforcement. This is due to the simplification of the discrete distribution of the reinforcement to the continuous one and the imprudent application of the classical truss model to the circular section, which is different in shear-resisting mechanism from the rectangular section. This study presents a rational model for the prediction of shear strength contribution by the circular transverse reinforcement considering the starting location of a diagonal crack, the number of transverse reinforcing bars crossing the main crack and the geometrical strength component of the transverse resistance. It was found that, for lower amount transverse reinforcement, the crack starting point and the number of crack crossing bars greatly influence the shear-resisting capacity. Proposed model leads to a reliable design equation which is derived using a linear regression method and is in good agreement with the lower bound of exact strength curve.

• Journal of The Korean Astronomical Society
• /
• v.29 no.spc1
• /
• pp.333-335
• /
• 1996

Here we report the results from spectroscopic observations of soloar active regions in the HeI 10830 ${\AA}$ line at the German Vacuum Tower Telescope(VTT) in Tenerife during the August 199:3 International EFR(Emerging Flux Region) Campaign. Four active regions in various stages of their evolution, i.e., NOAA7558, 7560, 7561, and 7562, were ovserved on 10 August 1993. From the observed HeI 10830 ${\AA}$ spectra in these active regions, spectroscopic quantities such as equivalent width(EW), doppler shift, doppler width, etc., were derived(see Figure l(a)) and the correlation between them were studied(see Figure l(b)). Our main results are as follows: (I)In NOAA7562, which is a young and evolving EFR, the EW is large, while it is small around a simple and roundish spot of NOAA7558. (2)In these active regions, redshift in the 10830 line is dominant when the EW is larger. (3)As the doppler width increases, the line tends to shift redward. (4)When the EW is smaller, it seems to exist another component which have dynamic characteristics different from the redshifting component. In NOAA7560 and NOAA7561, regions which have several small spots, the values of the EW are intermediate. Results (2) and (3) may suggest the possible existence of downflow above active regions, if the HeI 10830 ${\AA}$line is formed in the upper chromopshere, and it is consistent with the earlyer result from the SMM extreme-ultraviolet observation by Klimchuk(1987, Astrophys. J., 323, 368) (to be submitted. to Astronomy and Astrophysics; an extended abstract)

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.100-107
• /
• 2008

The aim of this paper is to design an intelligent character manipulation system suitable for the wireless broadband network environment named as Wibro and for the recent social networking service (SNS). The main feature of our proposed system is an automatic synthesis of a character utilizing the meta data which is attached to each component stored in a character database. It is the second advantageous feature that a user can make or modify his or her own character by modifying the component animation clip of its character. Once the character database is created, it can be represented and utilized in several ways by utilizing the meta data which is related to personal properties including emotion, life style, favorite things, and so on. The system can be evolved to a more powerful one by adopting the more user-related information and the more intelligent synthesis module.

• Parasites, Hosts and Diseases
• /
• v.52 no.6
• /
• pp.653-659
• /
• 2014

Surgery remains the preferred treatment for hydatid cyst (cystic echinococcosis, CE). Various scolicidal agents have been used for inactivation of protoscolices during surgery, but most of them are associated with adverse side effects. The present study aimed to evaluate the in vitro scolicidal effect of Nigella sativa (Ranunculaceae) essential oil and also its active principle, thymoquinone, against protoscolices of hydatid cysts. Protoscolices were aseptically aspirated from sheep livers having hydatid cysts. Various concentrations of the essential oil (0.01-10 mg/ml) and thymoquinone (0.125-1.0 mg/ml) were used for 5 to 60 min. Viability of protoscolices was confirmed by 0.1% eosin staining. Furthermore, the components of the N. sativa essential oil were identified by gas chromatography/mass spectroscopy (GC/MS). Our study revealed that the essential oil of N. sativa at the concentration of 10 mg/ml and its main component, thymoquinone, at the concentration of 1 mg/ml had potent scolicidal activities against protoscolices of Echinococcus granulosus after 10 min exposure. Moreover, thymoquinone (42.4%), p-cymene (14.1%), carvacrol (10.3%), and longifolene (6.1%) were found to be the major components of N. sativa essential oil by GC/MS analysis. The results of this study indicated the potential of N. sativa as a natural source for production of a new scolicidal agent for use in hydatid cyst surgery. However, further studies will be needed to confirm these results by checking the essential oil and its active component in in vivo models.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.1 no.2
• /
• pp.84-90
• /
• 1997

The turboshaft engine with the free power turbine has been used for various purposes, for instance electric power generator, emergency power source, helicopter powerplant and so on. Steady-state simulation program was developed and experimental tests was carried out for comparing with computer simulation results. The test unit was composed of 1-stage centrifugal compressor, the can type combustor chamber, 1-stage radial type compressor turbine, and radial type free power turbine, and its output power is obtained from 3-phase AC generator. Main component characteristics which was used for the steady state simulation program, were obtained from the manufacturer of the test unit, and modified from experimental results of test unit. In comparison between computer simulation and experimental test results even though the test unit has the operational limit, deviation of component performance characteristics in simulation were within 6％ range of experimental results.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.83-83
• /
• 2017

The National Agrobiodiversity Center (NAS, RDA, Republic of Korea) has continually collected new valuable genetic resources. In this study, we regenerated conserved kidney bean (Phaseolus vulgaris L.) germplasm which couldn't be available because of seed quantity and quality, and we also surveyed their morphological characters for the sustainable utilization. A total of 431 kidney bean accessions were regenerated and 18 morphological traits were surveyed according to the characterization guideline of RDA Genebank. Among the surveyed traits, flowering time ranged from May 23 to September 4 and 73.8% of tested accessions were mainly flowering in June. The maturity time ranged from July 1 to October 15 and main flowering time was July (91.4%). For plant type, 270 accs (62.6%) were climbing type followed by medium type of 86 accs (20.0%) and dwarf type of 65 accs (15.1%). The seed coat colors were various; yellow (34.6%), white (22.3%), brown (17.9%), red (10.7%), black (5.8%), violet (11%), pink (1.4%), navy (0.9%). Principal component analysis indicated that five principal components (PCs) with Eigen values >1 accounted for more than 65.8% variability. The first PC was more related to growth habits such as growth type, flowering time, and plant type. The second and third PCs showed higher values of the pigment characters such as seed coat color, flower color, and pod color. In fourth and fifty PCs, there were the higher positive values of the pod shapes. Our results provided insight into the characteristics kidney beans, thus the utilization basis of kidney beans might be elevated for bio-industry.

• Applied Chemistry for Engineering
• /
• v.31 no.4
• /
• pp.438-442
• /
• 2020

Studies on the recovery conditions and optimization process for valuable metal recovery through chemical treatment from detoxified asbestos-containing waste composed of calcium silicate, larnite, merwinite, and akermanite were conducted. The main components, Si, Ca, and Mg, of detoxified asbestos-containing waste (DACW) were separated and recovered in the form of SiO₂, CaSO₄, and Mg(OH)₂ compounds, respectively. Each separated component was confirmed through X-ray diffraction (XRD) and inductively coupled plasma spectrometer (ICP) analysis. The recovery conditions for each component were first treating them with an acid to separate SiO₂ and subsequently with H₂SO₄ to recover Ca in the form of sulfate, CaSO₄. The remaining Mg was recovered by precipitation with Mg(OH)₂ under strong basic conditions. This study suggested that it is possible to convert existing treatment process of asbestos waste by landfill through recovering the components into a resource-recycling green technology.

• The Bulletin of The Korean Astronomical Society
• /
• v.43 no.1
• /
• pp.41.2-41.2
• /
• 2018

EL CVn-type eclipsing binaries are composed of a massive A-type main-sequence primary star and a hotter B-type secondary one. These are worthy of particular attention because the secondary stars are rare objects to be extremely low-mass white dwarf precursors (ELM proto-WD) with the mass of ${\leq}0.2M_{\odot}$, evolving to higher effective temperatures and higher surface gravities. A few of them were discovered to show multi-periodic pulsations in one or both components. We monitored one of these rare and interesting objects, J0247-25 (=1SWASP J024743.37-251549.2), at two KMTNet sites of SAAO in South Africa and SSO in Australia. The observations were performed with the KMTNet 1.6m telescopes and pre-science 4K CCD cameras during the system test run from July to November 2014. Using the photometric data obtained for a total of 23 nights, we constructed well-defined eclipsing light curves in B/V-bands and derived absolute parameters (mass and radius, etc.) of each binary component. After subtracting model eclipsing curves from the data, we detected seven frequencies with 33~53 cycles per day (c/d) and identified them to be Delta Sct-type pulsations originated from the A-type primary component. Five frequencies were turned out to be excited by rotational splitting of non-radial pressure modes, enabled us to investigate rotational properties. We could not detect any frequency higher than 100 c/d, implying that pulsation amplitudes of the proto-WD secondary decrease greatly.

• The Korea Journal of Herbology
• /
• v.30 no.1
• /
• pp.11-18
• /
• 2015

Objectives : The objective of this study is to evaluate antioxidant activity and the main component content change of steaming-drying fermented Gastrodiae rhizoma extract. Methods : The antioxidant activities were determined for total polyphenol, flavonoid contents, SOD-like activity, electron donating activity, nitrite scavenging ability and major functional components(gastrodin and 4-hydroxybenzyl alcohol content) were also measured. Results : The polyphenol content of fermented Gastrodiae rhizoma by S. cerevisiae were higher than those of fermented Gastrodiae rhizoma by A. oryzae, and when the fermentation period is extended. SOD like activity of fermented Gastrodiae rhizoma showed to be increased by fermentation with S. cerevisiae than fermentation by A. oryzae. Electron donating activity of fermented Gastrodiae rhizoma were increased at almost parallel level as vitamin C, by fermentation. Notably, fermentation by A. oryzae was moderately better than fermentation by S. cerevisiae. Flavonoid content of Gastrodiae rhizoma showed to increasing by fermentation, particularly fermentation by S. cerevisiae was proven to be more effective than by A. oryzae. The more steaming-drying or increased period of fermentation would be resulted in more gastrodin contents but under the same conditions, 4-hydroxybenzyl alcohol content of fermentation by A. oryzae in case of steaming and drying 1 time and 3 time was higher than control. Conclusions : These results has strongly hint the possible applicability of fermentation might be effective to improve the diverse biological activities of Gastrodiae rhizoma and may further supports to develop a functional food materials.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.1053-1055
• /
• 2002

Recently CRT is getting large-sized, Flatness and High Fine Pitched in the meantime the raw material for shadow mask is in rapid progress of thinness, Low Thermal Expansion and high strength.Until now we have used AK(Aluminum Killed) & Invar(Fe-Ni alloy) materials for main raw material of shadow mask component. However recently Nb and Co addition and Nb+Co addition, which has advantage of Low Thermal Expansion and High Strength. has been developed as well as applying in mass production as CRT's trend has become more flat and fine pitch. Among of them, Co addition has been mass production as forming type (Flat CRT) with the beneficial effect of low thermal expansion & high strength for the first time. Since then Nb+Co addition has been used in mass production by the request of much higher strength of shadow mask component. In case of Nb addition, It's thermal expansion coefficient is a little lower than normal Invar and a little higher than Co addition, meanwhile Its Mechanical property is almost similar to Co Addition. The used samples of this experiment are 36%Ni + Fe, 32%Ni + 5%Co + Fe, 32%Ni + 5%Co + 0.3%Nb + Fe, 32%Ni + 0.3%Nb + Fe with heat treatment temperature of 600$^{\circ}C$, 650$^{\circ}C$, 700$^{\circ}C$, 750$^{\circ}C$, 800$^{\circ}C$, 850$^{\circ}C$, 900$^{\circ}C$ respectively under the condition of 15min holding time. After heat treatment, we have observed the change of mechanical property with addition of small elements through mechanical property investigation and metal structure observation as well as transition of thermal expansion coefficient by measuring of thermal expansion coefficient at 850$^{\circ}C$. In conclusion, 5%Co addition indicates that its thermal expansion coefficient is very similar under the condition of at 850$^{\circ}C$ for 15min 's heat treatment. From the experimental result it is suggested that Co addition is mostly suitable for Doming property and Nb addition is mostly suitable for Drop property.