• International Journal of Naval Architecture and Ocean Engineering
• /
• v.5 no.1
• /
• pp.21-32
• /
• 2013

Marine transportation industry is undergoing a number of problems. Some of these problems are associated with conventional marine fuel-oils. Many researchers have showed that fuel-oil is considered as the main component that causes both environmental and economic problems, especially with the continuous rising of fuel cost. This paper investigates the capability of using natural gas and hydrogen as alternative fuel instead of diesel oil for marine gas turbine, the effect of the alternative fuel on gas turbine thermodynamic performance and the employed mathematical model. The results showed that since the natural gas is categorized as hydrocarbon fuel, the thermodynamic performance of the gas turbine cycle using the natural gas was found to be close to the diesel case performance. The gas turbine thermal efficiency was found to be 1% less in the case of hydrogen compared to the original case of diesel.

• Journal of the Semiconductor & Display Technology
• /
• v.14 no.4
• /
• pp.67-71
• /
• 2015

Product of technology developed in this study is an external interface for controlling the equipment of pendant key remote control system circuit board, and it is used in the electronic component test equipment system. Main control system module is in the role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer engineers to control the inspection equipment. The pentane-key interface module to its role as a device for controlling the various control devices that make up the integrated system for microscopic examination at the request of the host computer for the engineer to control the inspection equipment. Development of the control system can be expected in the configuration of a system for efficient and accurate inspection of high-precision parts.

• Membrane Journal
• /
• v.2 no.1
• /
• pp.49-58
• /
• 1992

Functionalized organic polymers have been used as supports for heterogenized homogeneous catalytic process[1]. Sprcific advantages of using these resins as support reagents have been reviewed[2-4]. These include: -ease of by-product separation from the main reaction product usuallyby simple filtration. -prevention of intermolecular reaction of reactive species or functional groups by simulating high dilution conditions[5]. -utility of the "fish-hook" principle in which a minor component in fished out of a large excess substrate by the insoluble polymer[6]. -the possibility of reusing recovered reagents as well as eliminating the use of volatile or noxious substances[7]. Catalysis by ion-exchange membranes is perhaps one of the latest examples of the use of a polymer-supported species. Conceptually, catalysts on membrane supports offer several possible advantages over traditional powder type systems. They are: (1) Membranes immobilize the catalyst, preventing agglomeration. (2) Filtration is unnecessary for the catalyst separation and so complete catalyst recovery is facilitated. (3) Catalytyic and separation processes can be combined, allowing membrane supported catalysts for the continous flow reactors. reactors.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2017.11a
• /
• pp.26-27
• /
• 2017

Oyster packs generate about 150,000 tons a year. Various studies are under way to utilize this oyster shell. Ca is the main component of oyster shell and is used as a raw material of refractory board. Studies on application of refractory board using oyster shell are also continuing. It is expected that the refractory characteristics will be improved as the mass of oyster shell, that is Ca, increases. In this study, mortar specimens and board specimens were fabricated by increasing the mass ratio of oyster shells classified below 0.6mm, 1.2 ~ 0.6mm, 2.5 ~ 1.2mm and 5.0 ~ 2.5mm, and the strength and fire resistance characteristics were examined.

• Fire Protection Technology
• /
• s.19
• /
• pp.9-16
• /
• 1995

The spot-type heat detector is a main component of the automatic fire alarm system intended to signal when heat energy is produced in protected area. The most of protected area in our country is installed spot-type heat detector. On this study, the responsiveness to the change of environmental temp. of spot-type heat detec-tor were obtained and analyzed under specified temp., velocity in accordance with the KOFEIS stan-dard. The experiment was carried under the condition with the change of environmental temp. Concluion of this study is as follows : 1. It was confirmed that the responsiveness of rate-of rise heat detector is sensitive to temp. below 10 degrees above zero. The malfunction appeared at 40 degrees above zero and intended performance is disqualified at 50 degrees above zero. 2. The intended performance of fixed-temp. detector which is maintained for the change of envi-ronmental temp. But the responsiveneness is confirmed instability for the change of environmental temp.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2005.05a
• /
• pp.241-242
• /
• 2005

Due to the change in modern lifestyle and social pattern, food service industry has steadily grown recently. Especially, in terms of familiarity, chinese restaurant can be most popular type of dining alternative to Korean. The project was aiming to establish a new branch of the existing restaurant which has a main location in Kangnam area and has been famous for it's food quality, kind services and good interior design. This restaurant is located in Seohyoun-Dong, Bundang-Gu, Kyoungki-Do and this area is very crowded by both residential apartments and commercial offices. Considering the complexity in regional characteristics, this restaurant has basically targeted frequent dining-out family groups. In addition, the floor design was flexibly developed to be able to accomodate large office dining customers. The overall design was intended to keep very elegant and simple atmosphere, developed to express eco-friendly image by adopting the 'Water' component in the floor plan.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.26-29
• /
• 2007

By changing housing market, housing cultural center furnishes information, value added, image of housing. For publicity their unique house, construction companies provide not only concrete and substantial material but also sensible and capacity service through the community space of housing cultural center. The consumer's experience of housing cultural center have an effect on purchase power apartment. The image of enterprise is important to select commodities to consumers. Though main clients are women, housing cultural center has not space concept and aim to concern for them. According to begin women a group of consumers, they have purchasing power in family. Apartment is no exception. Housing cultural center is used as continuous culture space that provide various experiential chance for consumer, especially women by systematize and distinct design detail and feature component. Accordingly, the purpose of this study is an analysis about community space of housing cultural center with the woman marketing based on experience.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.467-470
• /
• 2001

Power electronic converters generate the harmonic voltage and current, and these harmonics have the harmful effects on the various components. For example, passive components such as capacitor and inductor, transformer, motor and other components are mainly affected in the power electronic system. Thus, the design and manufacturing of the power converters, which have the harmonic-free or mitigation strategies, are required. In particular, the lifetime and durability of these components are main requirement for enhancing the overall stability of the system. So, in this paper, the harmonics-related problems to the neighbouring components and mitigation research trends are presented.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.749-751
• /
• 2004

This paper analyzed the characteristics of the claw pole PM step motor by using 3D FEM. In case of analysing this type of motor, 3 dimensional analysis is necessary for an accurate analysis due to the magnetizing component of the z-axis direction. As a main design variable, the magnetization, width and the effects of skewing was selected. The variation of the detent torque and the back EMF depending on the shape of the pole is also shown.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09a
• /
• pp.352-353
• /
• 2006

The effect of TiC content on oxidation behavior of the sintered WC-TiC-TaC alloys with 2 mass% TaC and different TiC amounts of 3-45 mass% was investigated through oxidation tests in air at 973K. As a result of the tests, it was revealed that with increasing TiC content in the alloys, mass changes caused by oxidation and thickness of the scale decreased. Thus, it is considered that the main component of the scales changed gradually from $WO_3$ to $TiO_2$ with increasing TiC content in the alloys, and oxygen diffusion through the scale to the alloys was inhibited gradually.