• 한국정밀공학회지
• /
• 제22권2호
• /
• pp.30-37
• /
• 2005

A drum clutch which is a main part for the automatic transmission of auto-mobiles has been manufactured by glob threading and machining. The tooth shape of the drum clutch manufactured by machining has lower dimensional accuracy than that by pressing and its machining needs the enormous cost at plant investment. Thus, this study was designed to develop cold forging process and to improve the productivity and dimensional accuracy. In this work, variables affecting dimensional accuracy were first determined, then cold forming process design according to each variables was performed by FE simulation. Optimal process was suggested on the basis of analytical results.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.89-90
• /
• 2006

The bipolar plate is a major component of the PEM fuel cell stack, which takes a large portion of stack cost. In this study, as alternative materials fur bipolar plate of PEM fuel cells, graphite composites were fabricated by compression molding. Graphite particles mixed with epoxy resin were used as the main substance to provide electric conductivity. Flow channels were fabricated by compression molding, and design of experiments (DOE) was applied to the tests to evaluate moldability. Results showed that land width and channel depth were two significant factors for moldability, and channel width had little influence on the moldability.

• 한국정밀공학회지
• /
• 제20권2호
• /
• pp.66-75
• /
• 2003

This paper describes about the estimation method of die lift by wear and plastic deformation in hot forging process. The thermal load and the thermal softening are happened by the high temperature in hot forging process. Tool lift decreases considerably due to the softening of the surface layer of a tool caused by high thermal load and long contact time between tool and billet. Also, tool life is to a large extent limited by wear, heat crack and plastic deformation in hot forging process. Above all, the main factors which affects die accuracy and tool lift are wear and the plastic deformation of a die. The new developed technique for predicting tool life applied to estimate the production quantity for a spindle component and these techniques assist to improve the tool life in hot forging process.

• 생약학회지
• /
• 제32권2호통권125호
• /
• pp.140-144
• /
• 2001

The composition of essential oils in the leaves of three cultivars (Ban-Chung-Gat, Chung-Gat and Dolsan-Gat) of Brassica juncea L. were analyzed and their antifungal activity were investigated in this study. Allyl isothiocyanate, 2-phenyl ethyl isothiocyanate, 4-isothiocyanato-1-butene, 5-methyl isothiazole, benzene acetaldehyde, benzene propane nitrile and beta-ionone have been identified in all of the experimented oils. The main component of the oils from Ban-Chung-Gat and Chung-Gat was 2-phenyl ethyl isothiocyanate while allyl isothiocyanate was the representing compound in the oil of Dolsan-Gat. The antifungal activities of the oils were tested by micro broth dilution method and disc diffusion method. As the result the oils exhibited significant inhibiting activities against Aspergillus niger, A. flavus, Trichoderma viride, Candida albicans, C. utilis, C. tropicalis, Cryptococcus neoformans, Trichosporon mucoides, Trichophyton tonsurans and Geotrichum capitatum.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.535-536
• /
• 2006

Researches about micro technology travel lively in these days. Such many researches are concentrated in the field of materials and a process field. But properties of micro materials should be known to give results of research developed into still more. In these various material properties, reliability data such as mechanical, optical, thermal property, etc is the basic property. In this paper, it is measured that is material properties of main BLU(Back Light Unit) components in LCD(Liquid Crystal Display). The pattern shape of prism sheet, diffuser film and reflective plate are measured by variable 3D scanning equipments. It is researched which is the method to measure an optimal 3D pattern shape in each components.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.1005-1009
• /
• 2002

The objective of this research is to suggest the noise prediction method of the centrifugal compressor. It is focused on the Blade Passing Frequency (BPF) component which is regarded as the main part of the rotating impeller noise. Euler solver is used to simulate the flow-field of the centrifugal compressor and time-dependent pressure data are calculated to perform the near-field noise prediction by Ffowcs Williams-Hawkings (FW-H) formulation. Indirect Boundary Element Method (IBEM) is applied to consider the noise propagation effect. Pressure fluctuations of the inlet and the outlet in the centrifugal compressor impeller are presented and Sound Pressure Level (SPL) prediction results are compared with the experimental data.

• Natural Product Sciences
• /
• 제7권4호
• /
• pp.120-123
• /
• 2001

To develop systems for economic production of useful essential oil compounds, callus was induced from the seedlings of Agastache rugosa and cultured on MS medium. The volatile oil fraction was extracted from the callus and investigated by mean of GC-MS. The composition of the oil was compared with that of the mother plant. As a result, sixty five compounds including ferruginol were identified in the essential oil fraction. The main component of the oil from the leaves of Agastache rugosa was methyl chavichol (53.6%). Methyl jasmonate and jasmonic acid were added to the culturing cell suspension, separately and the composition of induced oil were compared. The oils from cultured cells treated with jasmonates showed considerably different patterns. Especially, the peak of estragole was found in callus oil after treatment with methyl jasmonate as though the amount was limited to 0.58%. In general, the TIC pattern of GC-MS of the callus oil became more similar to the oil from the leaves after elicitation.

• Natural Product Sciences
• /
• 제14권1호
• /
• pp.27-31
• /
• 2008

We have evaluated the combined antifungal effects of the essential oil from Eucalyptus globulus or its main component 1,8-cineole with ketoconazole. Checkerboard microtiter tests were used to analyze their effects against three Candida and six Trichophyton species. The susceptibility of the Trichophyton species to E. globulus essential oil differed distinctly. The fractional inhibitory concentration indices (FICIs) against the tested Candida species ranged between 0.09 and 0.38 for ketoconazole combined with E. globulus essential oil or 1,8-cineole, indicating significant synergism between ketoconazole and the oil samples. Similar experiments using Trichophyton species resulted in FICIs between 0.28 and 0.63, indicating relatively weaker combined effects than those observed with Candida species. Thus, the data reported here show that the anti-Candida effects of ketoconazole can be significantly improved in the presence of E. globulus essential oil or 1, 8-cineole.

• Tribology and Lubricants
• /
• 제26권3호
• /
• pp.190-198
• /
• 2010

GTL(gas-to-liquid) fuel produced by the Fischer-Tropsch process using carbon monoxide(CO) and hydrogen(H2) is expected to be one of the environmental friendly fuel for alternative and blended to petrodiesel. But GTL have poor lubricity due to paraffin as main component of GTL which is not involve polar materials. In this paper, we had investigated the lubricity improvement of GTL fuels with various lubricants using HFRR(high frequency reciprocating rig).

• 동의생리병리학회지
• /
• 제20권3호
• /
• pp.638-641
• /
• 2006

Iron is the required microelement supporting life and is the main component of hemoglobin. Thus iron has affinity with exercise capacity. Iron metabolism turbulence induced by exercise is one of causes of hematopoietic hypofunction. Results of the experiment showed that long-term treadmill exercise of progressive loading significantly decreased levels of erythrocyte indexes, serum iron, serum ferritin and significantly increased serum transferrin level. Nutrition supplement could significantly retard the variations, and Exercise +Nutrition group have higher levels of erythrocyte indexes, serum iron, serum ferritin and lower level of serum transferrin than Exercise group. The results indicated that nutrition supplement have function of prevent and cure on iron metabolism turbulence induced by exercise, furthermore significantly enhance hemoglobin level in rats.