• 한국산업융합학회 논문집
• /
• 제10권3호
• /
• pp.171-177
• /
• 2007

It is well known that mobile phones have been a indispensable communication tool for human life. The spiral springs are used as the main component of the semi-auto sliding mechanism of mobile phones. The characteristic of axiomatic approach is scientific and analytical method, and axiomatic approach is different from other design methods in offering the systematic method at an early stage of design. The axiomatic approach could determine design parameter and arrange the order of design and estimate the optimum design in good order. In axiomatic approach, the composition is divided by customer requirement, functional requirement, design parameter, and design matrix in large portion. This paper presents design in sliding mechanism for mobile phones by finite element method and axiomatic design.

• 한국산업융합학회 논문집
• /
• 제20권5호
• /
• pp.411-417
• /
• 2017

In this study, Sunroot was used as material in the fermentation process. Sunroot are widely distributed in Korea, The main component is composed of inulin. Fermented vinegar stimulates digestion in the body, as well as to relieve stress is a cause of increasing the neurotransmitter-Serotonin of the body. Therefore, we conducted fermentation studies using sunroot. This research conducted seven days, and the pH and brix value analysis was done every 12 hours during fermentation process. The experimental results show that the fermentation product under blender treatment is better than cutting treatment and without cutting treatment. Initial brix 25% is the best treatment for fermentation because produce fermentation product with a good taste and aroma than other treatment.

• 한국화재소방학회논문지
• /
• 제9권1호
• /
• pp.20-29
• /
• 1995

The sprinkler head is a component of the sprinkler system intended to discharge water for automatic detection and extinguishment of fires. On this study, thermal characteristic values affecting the sensitivity of the fusible alloy type sprinkler head were obtained and analyzed under heated air stream condition which had constant temperature and velocity. The experiment was carried out under the forced convection condition with both the conductive heat loss considered and neglected. The thermal characteristic values of the sprinkler head were obtained in accordance with the material and shape of the heat responsive element and the conditions of the main body.

• 대한약침학회지
• /
• 제5권1호
• /
• pp.159-169
• /
• 2002

Objective: It will be examined in this research whether Lacquer poison can be used as an distinguished treatment to cure incurable diseases by considering literature existing and various papers. Method: I studies origin, alias, species, toxicity, effect, treatment, component, medical action and contraindication of Rhus vemiciflua stokes through various kinds literatures. Results: Sap of Rhus vemiciflua stokes that is used for medical purposes, has an effect on anti-tumor, anti-oxidation, hangover cure, and gastritis suppression. Even though urushiol and fIavonoids, the main ingredient of lacquer, has medical cure effects. but urushiol results in a dermatropic allergy. Sincc xylem of a Rhus vemiciflua stokes, however. does not induce the allergy but has medical efficacy, research on this topic is needed.

• 한국정밀공학회지
• /
• 제21권2호
• /
• pp.52-59
• /
• 2004

In this paper, the automatic system generation algorithm based on the element combination algorithm discussed in the first part of this paper for designing an arbitrary type of the automatic transmissions is proposed. The powertrain design software using these algorithms is developed. This automotive powertrain design software with user-friendly graphic user interface has two main modules. The first module, the automatic power flow generation module, is already discussed in the previous paper. The second module dealing with the automatic system generation algorithm is discussed in this paper. The power-flow simulation software fur the arbitrary type of powertrain is then developed. The simulation and experimental results of the vehicle equipped with two planetary gear type automatic transmission are compared to validate the proposed algorithms and developed software. The simulation results demonstrate the good agreement with the experimental results.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2003년도 Proceedings of ACRS 2003 ISRS
• /
• pp.902-904
• /
• 2003

The main objective of this paper is to investigate the potential utility of multisensor remotely sensed data for improved coastal wetland mapping. Five data fusion models, three algebraic models (Multiplicative (MT), Brovey (BT) and Wavelet transform (WT)) and two spectral domain models (Principals component transform (PCT) and Intensity-Hue-Saturation (IHS)) were implemented and tested over the multisensor data. The fused images were then compared based on visual and statistical approaches. The results show that the wavelet transform provides greater flexibility for combining optical data sets and has good potential for preserving the spatial and spectral content of the original images . However, this model yields poor information when combining optical and microwave data. Brovey transform is more reliable for fusing optical and microwave image data and yields improved information about different wetland features of the coastal zone.

• 소성∙가공
• /
• 제12권1호
• /
• pp.18-25
• /
• 2003

This paper explains the process design for improving tool life in the conventional hot forging process. The thermal load and the thermal softening are happened by contact between the hotter billet and the cooler tools in hot forging process. Tool life decreases considerably due to the softening of the surface layer of a tool was caused by a high thermal load and long contact time between the tools and the billet. Also, tool life is to a large extent limited by wear, heat crack and plastic deformation in hot forging process. Above all, the main factors which affect die accuracy and tool life we wear and the plastic deformation of a tool. The newly developed techniques for predicting tool life are applied to estimate the production quantity for a spindle component and these techniques can be applied to improve the tool life in hot forging process.

• 한국임상수의학회지
• /
• 제23권3호
• /
• pp.286-290
• /
• 2006

To find alternative agents for bovine mastitis, the extracts of 30 selected herbal medicine were screened for their antibacterial activity against mastitis pathogens. The extracts of 9 herbal medicine, Terminaliae chebula, Cinnamonum loureirii, Paeonia japonica, Inula britannica, Caesalpinia sappan(C. sappan), Salix babylonica, Alpinia katsumadai, Polygonum aviculare and Coptidis japonica showed strong antibacterial activity. Among of them, C. sappan extract was found to be the most active against all bacteria in this experiment. Methanol extract of C. sappan and brazilin, the main component of C. sappan, had inhibitory activity against a variety of pathogens, however they had less of an inhibitory effect on gram negative bacteria. Minimal inhibitory concentrations of brazilin against gram positive pathogens was lower than that of methanol extract. These results showed that the extract of C. sappan has a potential as a therapeutic agent for bovine mastitis.

• 대한디지털의료영상학회논문지
• /
• 제12권1호
• /
• pp.15-18
• /
• 2010

Main component of radiography barrier aprons is lead. To manufacture a lead-free barrier sheath, barium sulfate and organic iodine-based chemicals should be mixed with rubber. Barrier capacity was tested in the medical field. To improve adaptation of rubber with the mixture, raw materials went through milling, agitation, and extruding processes. Three sheaths were manufactured with 30%, 80%, and 120% sulfate barium, respectively. This study found 10% lower barrier capacity of lead-free barrier than the traditional lead-containing rubber sheath. Problems, however, were confronted during the agitation and extruding processes. Mixing with rubber was a technically demanding job. Inconsistent depth, problems with thermal processing and dissipation were encountered as well.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2003년도 봄 학술발표논문집 Vol.30 No.1 (B)
• /
• pp.175-177
• /
• 2003

This paper addresses a problem of classifying human breast cancer into its subtypes. A main ingredient in our approach is kernel machines such as support vector machine (SVM). kernel principal component analysis (KPCA). and kernel partial least squares (KPLS). In the task of breast cancer classification, we employ both SVM and KPLS and compare their results. In addition to this classification. we also analyze the patterns of clinical outcomes in the feature space. In order to visualize the clinical outcomes in low-dimensional space, both KPCA and KPLS are used. It turns out that these methods are useful to identify correlations between clinical outcomes and the nonlinearly protected expression profiles in low-dimensional feature space.