• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.82-87
• /
• 2007

A cleaner has trouble with too much noise and power consumption. To solve these problems, the investigation for motors, which are the main component of vacuum cleaner, is required. However, it is difficult to analyze the flow by the experimental means because of the high speed of the fan rotation ranging from 30,000 rpm to 50,000 rpm. Moreover it takes much time to perform the numerical simulation for the flow. In this research, it is aimed to analyse the flow through the centrifugal fan which is believed to be a main noise source, by the computational method. The efficiency of the centrifugal fan is affected by friction loss, shock loss and so on. Those losses depend on factors like the velocity of impeller, blade shape and etc. Accordingly, the influence of the shape of impeller on the flow is investigated in this study. The computational analysis was done by changing impeller shapes. The flow around the centrifugal fan is simulated by applying the moving mesh. To verify the validity of the computation results, the air flow rate and the pressure field to the cleaner is compared with the experimental data. All simulations are performed by using commercial code SC/Tetra. The calculated results show good agreement with the experimental ones qualitatively and it is believed to be promising to use computational simulation in the improvement of the vacuum cleaner performance.

• Journal of Advanced Marine Engineering and Technology
• /
• v.17 no.4
• /
• pp.87-99
• /
• 1993

Nowadays, the cartridge valve can be controlled proportionally in remote place by adopting proportional solenoid and it becomes widely used as control component in hydraulic systems. Especially, multi stage proportional valve is attractive because it consumes less input power though its characteristics might slightly be defected. But, the system parameter should be carefully chosen to obtain optimistic characteristics. This study concerning three stage proportional throttle control valve is purposed to examine the influences of paameters to the dynamic characteristics. The typical transient and frequency responses of proportional throttle control valve were inspected through the experiments and compared to those derived from the theoritical analyses. And it was confirmed that the analyses are appropriate. Then the influences of various system parameters to the dynamic characteristics were examined by means of simulations. For the analyses, the basic equations derived from lumped model were linearized and the linearized equations were transformed to the transfer functions between inputs and outputs. Then the transient responses and frequency responses were obtained from transfer functions. 1. It is appropriate to estimate the dynamic characteristics of valve which has relatively sophisticated structure by means of system analyses using linearized equations. 2. Though the valve has two pilot stages, fairly good characteristics can be obtained by carefully choosing system parameters. 3. Main valve very quickly follows the movement of second pilot valve when the parameters of main valve(the oil supply passage and discharge passage fpr second pilot valve) are appropriately chosen.

• Journal of Mechanical Science and Technology
• /
• v.14 no.2
• /
• pp.226-235
• /
• 2000

The performance prediction of an airfoil fan using a commerical code, STAR/CD, is verified by comparing the calculated results with measured performance data and velocity fields of an airfoil fan. The effects of inlet tip clearance on performance are investigated. The calculations overestimate the pressure rise performance by about 10-25 percent. However, the performance reduction due to tip clearance is well predicted by numerical simulations. Main source of performance decrease is not only the slip factor but also impeller efficiency. The reduction in performance is 12-16 percent for 1 percent gap of the diameter. The calculated reductions in impeller efficiency and slip factor are also linearly proportional to the gap size. The span-wise distributions of phase averaged velocity and pressure at the impeller exit are strongly influenced by the radial gap size. The radial component of velocity and the flow angle increase over the passsage as the gap increases. The slip factor decreases and the loss increases with the gap size. The high velocity of leakage jet affects the impeller inlet and passage flows. With a larger clearance, the main stream moves to the impeller hub side and high loss region extends from the shroud to the hub.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.10a
• /
• pp.1051-1055
• /
• 1997

Hot forging is widely used in the manufacturing of automotive component. The mechanical, thermal load and thermal softening which is happened by the high temperature die in hot forging. Tool life of hot forging decreases considerably due to the softening of the surface layer of a tool caused by a high thermal load and long contact time between the tool and workpieces. The service life of tools in hot forging process is to a large extent limited by wear, heat crack, plastic deformation. These are one of the main factors affecting die accuracy and tool life. It is desired to predict tool life by developing life prediction method by FE-simulation. Lots of researches have been done into the life prediction of cold forming die, and the results of those researches were trustworthy, but there have been little applications of hot forming die. That is because hot forming process has many factors influencing tool life, and there was not accurate in-process data. In this research, life prediction of hot forming die by wear analysis and plastic deformation has been carried out. To predict tool life, by experiment of tempering of die, tempering curve was obtained and hardness express a function of main tempering curve.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.23 no.4
• /
• pp.198-203
• /
• 1987

The basis of all approaches to improve reliability of marine engines exists in analyzing the field data of troubles and failures on marine engines. This paper analyses the data of troubles and failures on marine engines by Principal Component Analysis Method, one of Multivariate Data Analysis Method. The total number of data investigated is 211 and the observation period is 9 years. The analyzed factors are categorized among five groups respectively; electric.automatic control equipments, auxiliary machinery, pipings, refrigerators.air conditioners, and main engine. The failures in main engine are discovered by a definite fact of disorder, on the contrary, the failures in auxiliary machinery, refrigerators and air conditioners are discovered by sensible judgement of the operators.

• Journal of Environmental Science International
• /
• v.19 no.9
• /
• pp.1083-1092
• /
• 2010

The spatial variability in the food chain structure of an estuary environment (Nanakita estuary, Japan) was investigated using fatty acid. Potential organic matter sources (terrestiral plants, macroalgae, benthic microalgae, dinflagellates and bacteria), sedimentary organic matters and benthic invertebrates (Nuttallia olivacea and Nereidae) were sampled in four locations with different tidal flat type. The main objective of the present study was to determine the origin of sediment and the food sources of N. olivacea and Nereidae along with small-scale spatial variability. The origin of sedimentary organic matters were mainly the fatty acid of bacteria and benthic microalgae. Especially, The organic matter of terrestrial plant origin was found the highest in station C. The diets of N. olivacea and Nereidae were found to be dominated by diatoms and terrestrial plants. Whereas, macroalgae and dinoflagellates showed little influence to benthic invertebrates. Moreover, according to principal component analysis, it is showed that benthic invertebrates in the same region are using the same food without relation with species. On the other hand, the N. olivacea and Nereidae of station D clearly contrasts with station B in terms of main food sources. From these results, it is suggested that food competition of benthic invertebrates revealed high a connection between small-scale spatial variability and food source in estuary.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.35-40
• /
• 2012

An AC generator is an important component in producing an electric power and so it requires highly reliable protection relays to minimize the possibility of demage occurring under fault conditions. It is a need for research of digital generator protection system(DGPS) for the next-generation ECMS and an efficient operation of protection control system in power station. However, most of protection and control system used in power plants have been still imported as turn-key and operated in domestic. This may cause the lack of the correct understanding on the protection systems and methods, and thus have difficulties in optimal operation. In this paper, presented ratio differential relaying(RDR) is main protective element in generator protection IED. The fault detection technique, operation zone and setting value of the RDR were studied and, compared with two of the fault detection algorithm. For evaluation performance of the RDR, the data obtained from ATPDraw5.7p4 modeling was used. The proposed methods are shown to be able to rapidly identify internal fault and did not operate a miss-operation for all the external fault.

• Journal of Korean Medical classics
• /
• v.26 no.1
• /
• pp.65-69
• /
• 2013

Objective : The main topic of this study is how the contribution of Treatiseon Febrile Diseases and midcellaneous diseases written by Zhang Zhongjing(张仲景) to the theory of spleen and stomach has been. Method : Analysis of formula in Treatiseon Febrile Diseases and midcellaneous diseases with theoretical and historical perspectives is the main method of the study. Result : The theory of spleen and stomach，which is formed in the long term medical practice, is the important component theory of traditional Chinese medicine. Zhang Zhongjing made a great contribution to the theory of spleen and stomach from disease prevention, the contraindication, drug usage, aftercare and so on in Treatiseon Febrile Diseases and midcellaneous diseases, which fully shows the academic ideals of strengthening spleen and stomach. Conclusion : Helping to study Treatiseon Febrile Diseases and midcellaneous diseases and understand the thought of Zhang Zhongjing, and gives reference to the theory of spleen and stomach' research in Treatiseon Febrile Diseases and midcellaneous diseases.

• Journal of Korean Academy of Nursing
• /
• v.42 no.4
• /
• pp.486-495
• /
• 2012

Purpose: The purpose of this study was to explore the main prerequisite for Korean Advance Directives [KAD] to ensure their better use. Methods: Data were collected from two focus group interviews and individual email responses. Study participants were 5 doctors and 6 nurses. All interview data were transcribed and analyzed using qualitative content analysis. Results: Three main themes emerged; establishing a philosophy of KAD, protocol to practice KAD, and the KAD document itself. A philosophy is needed to ensure individual needs, consensus to practice AD and identify principle agents. The core of protocol was found to be as follows; 1) process, 2) premise, 3) procedure, 4) contextual preparation, 5) timing, 6) feasibility. Component and feasibility need to be established for the document itself. Conclusion: For a positive acceptance of KAD in Korean society, a culture sensitive, reality based, and user friendly AD needs to be developed.

• Journal of Power Electronics
• /
• v.16 no.5
• /
• pp.1639-1649
• /
• 2016

This paper presents a family of soft-switching DC-DC converters with a simple auxiliary circuit consisting of a coupled winding and a pair of auxiliary switch and diode. The auxiliary circuit is activated in a short interval and thus the circulating conduction losses are small. With the auxiliary circuit, zero-voltage-switching (ZVS) and zero-current-switching are achieved for the main and auxiliary switches respectively, over wide input voltage range and load variation. In addition, the reverse-recovery problem of diodes is significantly alleviated because of the leakage inductor. Furthermore, the coupled inductor simultaneously serves as the main and auxiliary inductors, contributing to reduced magnetic component in comparison with the conventional zero-voltage-transition (ZVT) converters. Experimental results based on a 500 W prototype buck circuit validate the advantages and effectiveness of the proposed magnetic coupling ZVS converter.