• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.363.1-363.1
• /
• 2016

Transparent and stretchable conductors are expected to be an essential component in future stretchable optoelectronic devices. Until now, two main methods have been commonly employed to fabricate transparent and stretchable conductors by using metal nanomaterials: creating buckling configurations and creating network configurations. In this report, a novel strategy for obtaining transparent and stretchable conductors is presented, one that employs these two main approaches simultaneously. To the best of our knowledge, this proposed configuration of a buckled long nanofiber network in this study has not yet been reported. In order to provide the transparent conductors with dual mode stretchability originating from simultaneous buckled and network configurations, a buckled Au@polyvinylpyrrolidone (PVP) nanofiber network (hereafter referred to BANN for convenience) was fabricated by transferring Au-metallized electrospun PVP nanofibers onto a prestrained polydimethylsiloxane (PDMS) substrate. Our BANN shows considerably lower strain sensitivity of resistance than that of straight Au@PVP nanofiber network. Durability tests conducted by performing cyclic tensile strain reveal that the relative change in resistance of BANN (prestrain = 20%) is quite small after 1000 cycles. We also demonstrate that this BANN exhibits superior performance over widely used indium tin oxide conductors with regard to high optical transmittance and low sheet resistance.

• The Korea Journal of Herbology
• /
• v.22 no.3
• /
• pp.9-14
• /
• 2007

Objectives : This research was observed by examining the external and internal parts and the quantity of the surface components of the wild type and cultivar of Angelica dahurica in korea. Methods : The slice of the tested material mede by paraffin section technique was colored with Safranine Malachite Green contrast methods, and then observed and photographed by the microscope and examined the quantity of the surface components. Results : In the shape of the roots, the wild type had a very thin main root and 2 long roots, while the cultivar had a long root branched out from the short and thick main root making a square pyramid shape. Isoimperatorin was detected at Rt $17{\sim}18$ minutes. The wild type contained 0.56% while the cultivar contained it of 0.355%, thus the component of the wild type was about 1.5 times of that of the cultivar. Conclusions : It was thought that there might be also some differences in their genetic characteristics, etc.

• Journal of the Korean Society for Heat Treatment
• /
• v.33 no.4
• /
• pp.180-184
• /
• 2020

The crystallographic texture plays an important role in both the plastic deformation and the macroscopic anisotropy of magnesium alloys. In previous study for AZ80 magnesium alloy, it was found that the main texture components of the textures vary with the deformation conditions at high temperatures. Also, the basal texture was formed at stress of more than 15-20 MPa and the non-basal texture was formed at stress of less than 15-20 MPa. Therefore, in this study, uniaxial compression deformation of AZ80 magnesium alloy was carried out at high temperature (stress of 15-20 MPa). The uniaxial compression deformation is performed at temperature of 723 K and strain rate 3.0 × 10^-3s^-1, with a strain range of between -0.4 and -1.3. Texture measurement was carried out on the compression planes by the Schulz reflection method using nickel filtered Cu Kα radiation. EBSD measurement was also conducted in order to observe spatial distribution of orientation. As a result of high temperature deformation, the main component of texture and its development vary depending on deformation condition of this study.

• BMB Reports
• /
• v.38 no.2
• /
• pp.253-257
• /
• 2005

In our previous study, Soamsan, a traditional Oriental medicine, was shown to enhance the induction of antigen-specific immune responses, and it was speculated that the enhancing activity might be closely associated with glycoproteins contained within the medicine. To elucidate this speculation, protein samples from each component, used in the preparation of Soamsan, were obtained and their immune stimulating activities were tested with mouse splenocytes. All the samples markedly enhanced the lymphocyte proliferation and cytokine secretion by the mouse splenocytes. In particular, the enhancement was significantly higher with the protein sample treatments than with those of the original crude sample. Furthermore, the pronase E- and $NaIO_4$-mediated inhibition of splenocyte-stimulation activity of the protein samples clearly supported that glycoproteins are the main class of active ingredients responsible for the lymphocyte stimulating activity of the samples. Consequently, our findings suggest that glycoproteins might have a pivotal role in Soamsan-mediated immune modulation, although the in vivo effect of the glycoproteins should be further elucidated.

• Journal of Korean Vacuum Science & Technology
• /
• v.4 no.1
• /
• pp.1-5
• /
• 2000

The C 1s photoelectron energy loss spectra of tris (8-hydroxy-quinoline) aluminum (Alq$_3$) and N,N'-diphenyl-N,N'-bis (3-methyl phenyl)-1,1'-bi-phenyl-4,4'-diamine (TPD) thin films have been investigated. Two major loss structures, namely the plasmon dominated loss lines and shake-up satellites, have been observed. The shake-up spectrum of the C 1s photoelectron line is directly related to the $\pi$-$\pi$$\^$*/ energy gap of the molecule which plays an important role in organic electroluminescent materials. The molecular orbitals of Alq$_3$ and TPD and their major components, quinolime and benzene, have been calculated with the AMI semi-empirical method. The amount of the plasma-dominated loss of Alq$_3$ and TPD, which has to do with the delocalization of electrons through the molecule, was about 24 eV, alike in both cases. The main peak of the C 1s shake-up spectrum of Alq$_3$ and TPD, however, was 5.2 eV and 6.8 eV respectively. It was found that the main shake-up peak reflects more the local $\pi$\longrightarrow$\pi$$\^$*/ transition of quinoline and benzene component rather than the excitation of the whole molecule of Alq$_3$ and TPD. The C 1s shake-up spectra, however, revealed some correlation with the optical energy gap of the organic eletroluminescent materials.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.10a
• /
• pp.254-259
• /
• 1995

Large scale display panel(LSDP) is a main component in the next generation main control rooms. LSDP is located at the front of VDU-based operator's workstation and plays an important role in providing operators with overall information of plant status through mimic diagram, text/digit, graph, and so on. A critical matter determined at the first stage of LSDP design is how much information is displayed, because the information density of LSDP affects operator's performance. Many human factors guidelines recommend low information density of displays to avoid degrade of operator's performance, but doesn't provide a useful limit of information density. In this paper, we considered information density as the number of plant parameters and investigated the proper number of plant parameters through a human factors experiment. The experiment with 4 subjects was carried out and response time, error, and heart rate variation as criterion measures were recorded and analyzed. As the results, it is identified that the proper number of parameters in a LSDP is about thirty.

• Bulletin of the Korean Space Science Society
• /
• 2011.04a
• /
• pp.22.1-22.1
• /
• 2011

Two dominant components of polar motion are the Chandler and the annual components. Recently, the existence of 500-day period component in the Earth's polar motion has been manifested. But its existence is not clear on Fourier spectrum. One cause of difficulty involved here is that the amplitudes of the two main components are slightly variable in time by certain amounts (Chandler: 0.15~0.28 arcsec, annual: 0.09~0.15 arcsec). A residual polar motion time series excluding the two main components for a time span between 1962 Jan and 2010 Nov from IERS C04 time series dataset was constructed by least square fitting. For faithful fitting, 43 time segments of 6.8 year length (each starts on January 1st of successive years) were separately acquired and later combined together. The period of dominant peak in the spectrum of this residual polar motion time series is 490 days. Next peaks have their periods as semi-annual, 300~330 days, ~560 days, 670 days, and 1360 days.

• Journal of Environmental Science International
• /
• v.6 no.5
• /
• pp.461-472
• /
• 1997

This study was carried out to investigate the characteristics of chemical components and precipitation at Kimhae area from March, 1992 to June, 1994. The pH values, concentration of soluble ions($Cl^-$, $NO_2^-}$ $NO_3^-}$, $NO_4^{2-}$-, $PO_4^{3-}$. $F^-$, $Mg^{2+}$, $Ca^{2+}$, $Mn^{2+}$, $K^+) and non-soluble metals(Cr.Si. Zn, Pb, Cu, Fe, Mn, Mg, Ad. V. Cal were measured by pH meter, IC (ion Chromatography) and ICP(Inductively Coupled Plasma). The data were analyzed by the dally. hourly distribution characteristics of acidity and chemical components, as well as the correlation between them. The results are as follows. 1. The pH range of precipitation was from 3.45 to 6.80 in Kimhae area. and average value was pH 4.62 and main chemical components were $SO_4^{2-}$, $Cl^-$, $NO_3^-$. The highest pH value and concentration appeared in initial rain, which might result from urbanlzation and industrialization in this area and long term transportation from China. 2. The hourly correction distribution of main anions related to pH value In the rainwater showed $SO_4^{2-}$ > $NO_3^-$ > $Cl^-$. Hourly concentration of heavy metal and each ion was highly correlated with pH in the precipitation.

• Journal of the Korean Institute of Rural Architecture
• /
• v.22 no.3
• /
• pp.33-40
• /
• 2020

Wood is one of the main materials of wooden building. Hanok also uses wood as its main component. Recently, Hanok continues to be built. Wood is affected by the climatic environment. The growth of decay bacteria is activated at more than 80% relative humidity. The microclimate environment and moisture content were measured for architectural cultural properties that have been maintained for a long time as a wooden building. The method analyzed the measured data by distinguishing between cloudy and sunny days. In the case of the old house, Anchae moisture content was higher than that of Sarangchae. This seems to be due to the narrow front yard or the planting of trees. The microclimate environment inside the house began to decrease in humidity from 8 am. According to the survey data, the relative humidity was less than 80% from 9 am when there was wind around 4-6 am. It appeared an hour earlier than in the absence of wind. As a result, the time interval for dehumidifying of wood was widened. Therefore, the wooden building is open to the front so there is airflow under the eaves during the daytime and wind in the morning appear to be alternatives in order to lower the moisture content.

• Journal of information and communication convergence engineering
• /
• v.3 no.3
• /
• pp.157-162
• /
• 2005

Web services are key applications in business­to-business, business-to-customer, and enterprise applications integration solutions. As the mobile internet becomes one of the main methods for information delivery, mobile Web Services are regarded as a critical aspect of e-business architecture. In this paper, we proposed a mobile Web Services middleware that converts conventional internet services into mobile Web services. We implemented a WSDL (Web Service Description Language) builder that converts HTML/XML into WSDL and a SAOP (Simple Object Access Protocol) message processor that performs SOAP message handling, chain and handling of server requests. The former minimizes the overhead cost of rebuilding mobile Web Services and enables seamless services between wired and wireless internet services. The latter enhances SOAP processing performance by eliminating the Servlet container (Tomcat), a required component of typical Web services implementation. Our main contributions are to overcome the latency problem of current Web Services and to provide an easy mobile Web service implementation. Our system can completely support standard Web Services protocol, minimizing communication overhead, message processing time, and server overload. Finally we compare our empirical results with those of typical Web Services.