• 대한전자공학회논문지TC
• /
• 제41권2호
• /
• pp.65-70
• /
• 2004

본 논문에서는 비선형 RF(Radio Frequency) 증폭기의 선형화를 위한 새로운 구조의 전치왜곡 선형화기를 제안한다. 전치 왜곡에 이용되는 3차 비선형 성분은 RF 신호의 포락선(envelope) 전력을 이용하여 발생시킨다. 3차 왜곡 성분 발생기(3rd order distortion generator)는 FET로 구성되었고, 왜곡 신호 발생 후 남아 있는 주 신호 성분 제거를 위해 평형 결합 구조를 제시하였다. 발생된 3차 혼변조 신호는 RF 대역에서 진폭과 위상을 조절함으로써 최적의 선형화 조건을 만족시킨다. 2-tone 실험결과 증폭기의3차 흔변조특성이 30～40㏈ 개선되었다. IS-95 CDMA 신호 실험 결과 인접 채널 전력 비(ACPR)가 약 l0㏈이상 개선됨을 확인하였다.

• 한국환경과학회지
• /
• 제6권3호
• /
• pp.259-265
• /
• 1997

This study was conducted to Investigate the treatment of wastewater from acetaldehyde manufacturing plant by activated sludge process with Micrococcus roseus AW-6, Micrococcus roseus AW-22, Microbacterium lacticum AW-38 and Mlcrobacterium nae- vaniformans AW-41. The $COD_{Mn}$ and $BOD_5$ of the wastewater were 5, 260mg/L and 6, 452mg/L, respectively. pH was 1.85. The main organic component in the wastewater was acetic acrid which was contained 67, 600mg/L. Optimum dilution time for activated sludge process was shown 10 times. The specific substrate removal rate(BL) was 1.95day-1 and the nonbiodegradable matters(Sn) were 23.2mg/L. Saturation constant (Ks) and mainmum specific growth rate(qmax) were 1, 640mg/L and 2.33day-1, respectively. Sludge yield coefficient(Y) and endogenous respiration coefficient(kd) were 0.28mg MLVSS/mgCOD and 0.02day-1, respectively. $COD_{cr}$ removal efficiency was 91% for 1.95day of hydraulic retention time.

• 한국세라믹학회지
• /
• 제51권2호
• /
• pp.115-120
• /
• 2014

Quicklime(CaO) is generally obtained through the calcination of limestone, the main component of which is calcium carbonate($CaCO_3$). Quicklime generates high-temperature heat when reacting with water, forming slaked lime($Ca(OH)_2$). The industrial sectors for limestone are determined by the hydraulic activity of slaked lime, which is obtained by measuring temperature changes during the hydration reaction. Accordingly, this study examined the different crystallographic characteristics of limestone as affected by the geological origins of the regions where the limestones were produced, and how these characteristics affected hydraulic activity. Six limestone samples were collected from the Jecheon and Cheongsong areas and the hydraulic activities were measured in accordance with KS E 3077. The results indicate that limestone produced in the Cheongsong area, recrystallized through metamorphism caused by hydrothermal alteration, hada larger grain size of calcite than that of the Jecheon area, and displays a tendency of changing to marble. Limestone from the Cheonsong area showed more radical reaction in the early stage of hydration compared to that ofthe Jecheon area. In addition, it was revealed that limestone having more impurities like $SiO_2$ have lower hydraulic activity.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.18-28
• /
• 2006

The Electric Power Subsystem (EPS) is one of the most critical systems on any satellite because nearly every subsystem requires power. This makes the choice of power systems the most important task facing satellite designers. The main purpose of the Satellite EPS is to provide continuous, regulated and conditioned power to all the satellite subsystems. It has to withstand radiation, thermal cycling and vacuums in hostile space environments, as well as subsystem degradation over time. The EPS power characteristics are determined by both the parameters of the system itself and by the satellite orbit. After satellite separation from the launch vehicle (LV) to its orbit, in almost all situations, the satellite subsystems (attitude determination and control, communication and onboard computer and data handling (OBC&DH)), take their needed power from a storage battery (SB) and solar arrays (SA) besides the consumed power in the EPS management device. At this point (separation point, detumbling mode), the satellite's angular motion is high and the orientation of the solar arrays, with respect to the Sun, will change in a non-uniform way, so the amount of power generated by the solar arrays will be affected. The objective of this research is to select satellite EPS component types, to estimate solar array illumination parameters and to determine the efficiency of solar arrays during both detumbling and normal operation modes.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.773-778
• /
• 2018

In-situ transesterification of microalgae lipids using microwave irradiation has potential to simplify and accelerate biodiesel production, as it minimizes production cost and reaction time by direct transesterification of microalgae into biodiesel with microwave as a heating source. This study was conducted to research the effect of microwave irradiation with in-situ transesterification of microalgae under base catalyst condition. The process variables (reaction time, solvent ratio, microwave power) were studied using 2% of catalyst concentration. The maximum yield of FAME was obtained at about 32.18% at the reaction time of 30 min with biomass-methanol ratio 1:12 (w/v) and microwave power of 450 W. The GC MS analysis obtained that the main component of FAME from microalgal oils (or lipids) was palmitic acid, stearic acid and oleic acid. The results show that microwaves can be used as a heating source to synthesize biodiesel from microalgae in terms of major components resulting.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 C
• /
• pp.1082-1084
• /
• 1998

In this paper, we developed a diagnosis device for ZnO arrester to detect on-line leakage current and acquire data from the power distribution system. The arrester is important power equipment used in power transmission and distribution systems to protect the generator and the main transformer from surge and overvoltage. First of all we developed a diagnosis device for ZnO arrester leakage current. And then we detect the total leakage current by the developed device without disconnecting the arrester ground wire and analysis the 3rd order harmonic by Fast Fourier Transform(FFT) to diagnose the ZnO arrester deterioration. With measuring the total current and the resistive current of power distribution system in operation, we analysis the trend of resistive current component in the total leakage current. We expect the result will be promote the method to protect electrical utility and customer from accident.

• KSBB Journal
• /
• 제15권6호
• /
• pp.673-676
• /
• 2000

호염성 세균이 갖는 특성 즉, 다른 균에 의한 오염 감소, 세포벽 파괴의 수월성, 용매를 이용하지 않는 색소추출 등을 응용하기 위한 기초 자료를 얻기 위하여 호염성 세균인 Haloarcular sp. EH-1 으로부터 추출한 천연색소를 bioreactor 에서 배양한 후 색소의 함량을 조사한 결과 3 L 용량에서는 8 83.1 mg%, 5 L 용량에서는 82.7 mg%의 카로테노이드를 함 유하는 것으로 나타났다 이들의 주된 성분은 $\beta$-c따otene (8.1 %), $\beta$-hydroxyechinenone (42.0%) 및 astaxanthin(25.0% )으로 동정 되었으며, 이들 성분을 동정하기 위하여 표품과의 co- TLC, co-HPLC, 가시부 홉수스펙트럼, 화학적 변화 등을 조사하였다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제35회 추계학술대회논문집
• /
• pp.605-609
• /
• 2010

본 논문은 유성기어를 적용한 터보펌프의 개념설계에 대하여 기술하였다. 발사체시스템에서는 무게가 가장 중요한 설계인자 중 하나이다. 케로신 혹은 메탄을 연료로 사용하는 터보펌프의 경우 통상 시스템의 간단성 때문에 1축(혹은 동축) 형식이 사용된다. 이 경우 단점은 산화제펌프와 연료펌프의 회전수가 서로 최적이 아닌 상태에서 작동하게 되는 것이다. 각 펌프가 최적 회전수에서 작동하고 또한 증가된 회전속도로 부터 부품의 효율 증대와 무게이득을 최대화하기 위해서는 터보펌프에 유성기어를 적용하는 것이 최선의 방법이 아닐까 판단된다. 본 논문에서는 유성기어를 도입한 터보펌프의 개념설계와 가능성에 대해 제안하였다.

• Structural Engineering and Mechanics
• /
• 제53권2호
• /
• pp.325-336
• /
• 2015

This paper presents a study based on the damage due to the fatigue life of thrust ball bearings using vibratory analysis. The main contribution of this work lies in establishing a relation between modal damping and the rolling contact fatigue damage of the thrust ball bearing. Time domain signals and frequency spectra are extracted from both static and dynamic experiments. The first part of this research consists in measuring the damping of damaged thrust ball bearings using impact hammer characterization tests. In a second part, indented components representing spalled bearings are studied to determine the evolution of damping values in real-time vibration spectra using the random decrement method. Dynamic results, in good agreement with static tests, show that damping varies depending on the component's damage state. Therefore, the method detailed in this work will offer a possible technique to estimate the thrust ball bearing fatigue damage variation in presence of spalling.

• Earthquakes and Structures
• /
• 제7권5호
• /
• pp.817-842
• /
• 2014

ASCE/SEI 41-13 provides modeling parameters and numerical acceptance criteria for various types of members that are useful for evaluating the seismic performance of reinforced concrete (RC) building structures. To accurately evaluate the global performance of a coupled wall system, it is crucial to first properly define the component behaviors (i.e., force-displacement relationships of shear walls and coupling beams). However, only a few studies have investigated on the modeling of RC coupling beams subjected to earthquake loading to date. The main objective of this study is to assess the reliability of ASCE 41-13 modeling parameters specified for RC coupling beams with various design details, based on a database compiling almost all coupling beam tests available worldwide. Several recently developed coupling beam models are also reviewed. Finally, a rational method is proposed for determining the chord yield rotation of RC coupling beams.