• Transactions of the Korean Society of Automotive Engineers
• /
• v.19 no.3
• /
• pp.122-129
• /
• 2011

Biodiesel produced from triglyceride which is main component of animal fats and vegetable oils by methanolysis was known for remarkable cetane number. In this study, the derived cetane number of 3 kinds of biodiesel came from vegetable oils such as soybean oil, palm oil, and perilla oil and 2 kind of biodiesel which were produced from beef tallow and pork lard were analyzed using IQT (Ignition quality tester). In IQT test result, the derived cetane number of palm- , beef tallow- and pork lard's biodiesel were more excellent than other biodiesels. After analysis of biodiesel composed molecular by gas chromatography-mass and determination of the derived cetane number of pure biodiesel components using IQT, we have found that the low olefin contented and long alkyl chained biodiesel have excellent derived cetane number.

• Journal of Engineering Education Research
• /
• v.17 no.1
• /
• pp.42-49
• /
• 2014

The main purposes of this study was to develop evaluation model, which provides program educational objectives(PEO) evaluation research with guidances on how to evaluate the program educational objectives and procedures in order to enhance the quality of engineering education. Educational objective evaluation is reciprocal processes that depend on and affect one another. Thus, the evaluation component deals with how to identify members' strengths, weakness, and needs, how to assess and improve the effectiveness of curriculum programs, and how to provide data that assist in decision making. After literature reviews about the case studies on the program educational objectives evaluation, this study, to understand the meaning of education evaluation and the engineering accreditation, and then, examined the evaluation model for program educational objectives. This study suggested evaluation components of program educational objectives. In particular, the distinctions between diagnostic, formative, and summative evaluation are discussed. The result of this study is significant in terms of guiding the future evaluation model development for program educational objectives.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.11
• /
• pp.5556-5573
• /
• 2017

As a main component of Internet of Things (IoTs), the wireless sensor networks (WSNs) have been widely applied to various areas, including environment monitoring, health monitoring of human body, farming, commercial manufacture, reconnaissance mission in military, and calamity alert etc. Meanwhile, the privacy concerns also arise when the users are required to get the real-time data from the sensor nodes directly. To solve this problem, several user authentication and key agreement schemes with a smart card and a password have been proposed in the past years. However, these schemes are vulnerable to some attacks such as offline password guessing attack, user impersonation attack by using attacker's own smart card, sensor node impersonation attack and gateway node bypassing attack. In this paper, we propose an improved scheme which can resist a wide variety of attacks in WSNs. Cryptanalysis and performance analysis show that our scheme can solve the weaknesses of previously proposed schemes and enhance security requirements while maintaining low computational cost.

• Journal of Surface Science and Engineering
• /
• v.32 no.6
• /
• pp.647-657
• /
• 1999

Due to the inherently poor adhesion strength of Cu-based leadframe/EMC (Epoxy Molding Compound) interface, popcorn cracking of thin plastic packages frequently occurs during the solder reflow process. In the present work, in order to enhance the adhesion strength of Cu-based leadframe/EMC interface, black-oxide layer was formed on the leadframe surface by chemical oxidation of leadframe, and then oxidized leadframe sheets were molded with EMC and machined to form SDCB (Sandwiched Double-Cantilever Beam) and SBN (Sandwiched Brazil-Nut) specimens. SDCB and SBN specimens were designed to measure the adhesion strength between leadframe and EMC in terms of critical energy-release rate under quasi-Mode I ($G_{IC}$ ) and mixed Mode loading ($G_{C}$ /) conditions, respectively. Results showed that black-oxide treatment of Cu-based leadframe initially introduced pebble-like X$C_2$O crystals with smooth facets on its surface, and after the full growth of $Cu_2$O layer, acicular CuO crystals were formed atop of the $Cu_2$O layer. According to the result of SDCB test, $Cu_2$O crystals on the leadframe surface did not increase ($G_{IC}$), however, acicular CuO crystals on the $Cu_2$O layer enhanced $G_{IC}$ considerably. The main reason for the adhesion improvement seems to be associated with the adhesion of CuO to EMC by mechanical interlocking mechanism. On the other hand, as the Mode II component increased, $G_{C}$ was increased, and when the phase angle was -34$^{\circ}$, crack Kinking into EMC was occured.d.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.22 no.1
• /
• pp.1-8
• /
• 1989

Demersal fish community in Cheonsu Bay was analyzed using fish samples collected by a small otter trawl from March to November, 1986. Of the 32 species identified, Nibea argentatus, Chaturichthys stigmatias Crptocentrus filifer, Cynoglossus joyneri and Jonius belengeri pre-dominated in abundance. Based upon principal component analysis of species composition data, the fishes were grouped into resident, migrant and temporal species. Resident fish wintered in the deeper part of the bay, showing a peak in biomass during cold months. In spring, warm weather seasonals, adult N. argentatus and J. belengeri, migrated o the bay for spawing. However, the biomass of the migrant was not more than that of the wintered adult residents. From July to September, juveniles of many species were collected, but the number of individuals was smaller than that of the littoral or pelagic zones. This suggests that the deeper area of the bay did not serve as a main nursery ground of the juveniles with the exception of two migrant scianid fishes. As a result, the benthic fish of the bay were more abundant in cold months than in summer.

• Journal of Aquaculture
• /
• v.10 no.2
• /
• pp.189-197
• /
• 1997

A series of short (8 hours) and long term (96 hours) exposure studies was conducted on a laboratory scale to evaluation (1) the threshold concentrations of petroleum hydrocarbon in seawater which can lead to tainting problems in yellow tail (Seriola quinqueradiata) and (2) the time to recover (depuration period) once the tainting has occurred. The water-soluble fraction (WSF) of crude oil was prepared by stirring the oil with cold seawater. The main component of the WSF were low-boiling aromatics, although these were only al small proportion of the starting oil. From the sencory evaluation it was concluded that the threshold hydrocarbon levels in seawater which will impart a taint in yellow tail fillets within a 8-hour exposure period (short exposure period) are in the range of 0.4 to 1.0 ppm and within a 96-hour exposure period (long exposure period) are in the range of 0.2 to 0.5 ppm. Depuration trials were carried out with WSF from crude oil. The fish were exposed for 48 hours to concentration of 2.5 ppm hydrocarbons. After 48-hour exposure period, the fish were allowed to depurate in fresh, uncontaminated seawater. Depuration time for these fish was 10 days. The taste panelists were able to detect the contaminated fillets very easily while the depurated fish could not be distiguished from the control.

• The Korean Journal of Ceramics
• /
• v.6 no.3
• /
• pp.318-321
• /
• 2000

Most compressive strengths commonly used in the construction field are in a range of 240 to 300 kgf/$\textrm{cm}^2$ at 28 days. To get this rage of strengths, however, high-flowing concrete requires cementitious binders more than 400 to 450 kg/$\textrm{cm}^2$ for preventing segregation and sedimentation of aggregates. This amount of cementitious binder generates a large emission of excessive hydration heat, which may consequently induce harmful cracks in concrete structure. In order to reduce excessive hydration heat, thus, this paper aims at fabricating a high-flowing concrete under the condition that cement content is kept as low as 350kg/$\textrm{cm}^3$ by using viscose agents. In a parametric study, effects of cement types such as a ternary blended cement and Type V on he physical characteristics of high-flowing concrete were evaluated. In addition, the influence of viscosity was also investigated by applying two different viscose agents, one in a range of 6,000 to 10,000 cps and the others of 10,000 to 14,000 cps. In terms of chemical admixtures used in concrete mixture, the superplasticizer was Sulfonated Melamine-Formaldehyde Condensate with about 30,000 of molecular weight, and main component of viscose agent was HPMC (Hydroxy Propyl Methyl Cellulose). Slump flow was fixed at 50cm with different dosages of superplasticizer in weight.

• The KSFM Journal of Fluid Machinery
• /
• v.5 no.2 s.15
• /
• pp.15-21
• /
• 2002

The hydraulic performance analysis of an entire pump system composed of inducer, impeller, volute and seal for the application of turbopumps is numerically performed using three-dimensional Navier-Stokes equations. A quasi-steady mixing-plane method is used on the impeller/volute interface to simulate the unsteady interaction phenomena. From this work, the effects of each component on the pump performance are investigated at design and off-design conditions through the analysis of flow structures and loss mechanisms. The computational results are in a good agreement with experimental ones in terms of the headrise and efficiency even though very complex flow structures are present. It is found that the asymmetric pressure distribution along the volute wall constitutes the main reason of the difference between experimental and computational results, due to the limitation of the quasi-steady method. Since the volute was found to be over-designed by the pressure distribution of the volute wall, re-design of the volute has been performed, resulting in an improved performance characteristic.

• Polymer(Korea)
• /
• v.30 no.2
• /
• pp.108-111
• /
• 2006

In this work, the effect of the hydrophobicity of acrylic polymers on the membrane morphology was investigated. The membranes were prepared with poly(methyl methacrylate) (PMMA), poly(ethyl methacrylate) (PEMA), poly (butyl methacrylate) (PBMA), poly(isobutyl methacrylate), and their blends using the wet phase inversion method. PMMA and PEMA having a relatively less hydrophobicity formed the channel-like structure, whereas PBMA and PIBMA having more hydrophobic units formed the finger-like structure. These morphological changes were attributed to differences in the solidification process of the polymer-rich phase determine d by the polymer/solvent/nonsolvent ternary phase diagram. The membrane structures of the blends were controlled by the main component of their blends.

• Nuclear Engineering and Technology
• /
• v.30 no.3
• /
• pp.262-272
• /
• 1998

The experiences and causes of pressure tube cracking accidents in the CANDU reactors and the development of the fuel channel at AECL(Atomic Energy Canada Limited) have been described. Most of the accidents were caused by Delayed Hydride Cracking(DHC). In the cases of the Pickering units 3&4 and the Bruce unit 2, excessive residual stresses induced by an improper rolled joint process played a role in DHC. In the Pickering unit 2, cracks formed by contact between the pressure and calandria tubes due to the movement of the garter spring were the direct cause of the failure. To extend the life of a fuel channel, several R&D programs examining each component of the fuel channel have been carried out in Canada. For a pressure tube, the main concern is focused on changing the fabrication processes, e.g., increasing cold working rate, conducting intermediate annealing and adding a third element like Fe, V, and Cr to the tube material. In addition to them, chromium plating on the end fitting and increasing wall thickness at both ends of the calandria tube are considered. There has also been much interest in the improvement of fuel channel performance in our country and several development programs are currently under way.