• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.306-314
• /
• 2018

차세대 중형위성에 탑재되는 2축 짐벌형 X-밴드 안테나는 대용량 영상정보 송신 안테나로, 위성의 자세와 궤도 운동과 무관하게 자세 및 안테나 지향각에 따라 방위각 축과 고각축이 동시에 회전 구동하여 지상안테나를 지향하게 된다. 상기 안테나는 위성체 외부에 극심한 온도차를 보이는 궤도 열환경에 노출되며, 안테나 및 주요 구성품이 허용온도 범위 내를 유지할 수 있도록 열설계를 해야 한다. 본 논문에서는 2축 짐벌형 X-밴드 안테나의 열설계 유효성을 해석적으로 요구조건을 만족함을 확인하였으며, 시스템 열진공 시험 조건해석 및 궤도 운용조건에서의 열해석을 수행하여 히터 용량 및 듀티 사이클을 도출하였다. 아울러, 상기 안테나의 핵심 주요 구성품에 대한 허용온도 요구조건 충족 여부를 확인하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2010년도 춘계학술대회
• /
• pp.934-937
• /
• 2010

본 논문에서는 물리적 스위치 방식의 인터페이스를 사용하기 불편한 장애우나 전자기기 사용에 익숙하지 못한 사람들을 위한 차세대 인터페이스를 구현하기 위해 음성인식과 3축 가속도센서를 헤드셋과 연동하여 새로운 마우스 포인팅 시스템을 구현하였다. 인식률이 상대적으로 높은 화자종속방식을 지원하고 그 음성신호를 인식해서 BCD 코드로 출력을 내는 음성인식 모듈을 헤드셋의 마이크의 출력부와 연결하여 사용하였으며, TMS320F2812 프로세서를 사용한 컨트롤러를 구축하여 3축 가속도 센서와 연동한 후 헤드셋의 머리윗부분에 장착하여 비주얼 베이직을 통해 헤드셋으로 마우스 포인팅 및 클릭이 가능한 시스템을 구현하였다.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2003년도 추계학술발표회 논문집
• /
• pp.97-101
• /
• 2003

Among GPS methods, first of all, we used RTK GPS to analyze the precision of monitoring and then on the basis of it, we developed a monitoring system using RTK GPS when we measured the behavior of main tower of a suspension bridge by using RTK GPS method and IMU, which was an inertia navigation system. Comparing a deviation between observation value using IMU and RTK GPS, X axis was 1mm, Y axis 1mm and Z axis 2.21mm. It turned out that it was possible to monitor and measure structures by using RTK GPS method. Besides, in order to manage the structures and prevent their disaster, the transformed monitoring, which used dynamic RTK GPS measurement method, was applied in real time. It was verified that it could be used as transformed monitoring measurement method for massive structures.

• 한국측량학회:학술대회논문집
• /
• 한국측량학회 2004년도 춘계학술발표회논문집
• /
• pp.113-117
• /
• 2004

Such social structures as bridges, buildings, dams and towers have been transformed by their own load or fundamental ground. They have been behaved by other external causes. These regular or irregular behaviors threaten to do their users safety. Therefore, to monitor the load of the structures or reaction shown by them could help to verify their behaviors. RTK GPS allows the use of a static base station and remote rover unit to allow for data collection within several seconds and in real time. It is useful for monitoring the behaviors of massive structures like bridges. In this Study, Among GPS methods, we used RTK GPS to analyze the precision of monitoring and then on the basis of it, we developed a monitoring system using RTK GPS when measured the behavior of main tower of a suspension bridge by using RTK GPS. Comparing a deviation between observation values, X axis was 1mm, Y axis was 1mm and Z axis 2.2mm. It turned out that it was possible to monitor and measure structures by RTK GPS.

• 한국해양공학회지
• /
• 제30권2호
• /
• pp.125-133
• /
• 2016

In this paper, we propose a vertical axis water turbine with dual blades. A parametric study was conducted using numerical analyses. First, a two-dimensional finite-volume analysis with a commercial code was used to find the pitch angle of the main blade under different tip speed ratio conditions. Second, we developed a potential-based panel method to find the best configuration of the inner blades. Experimental tests were conducted at the circulating water channel of Chungnam National University. Various configurations of the dual blades were considered, and their performances were comparatively investigated. The results showed that the turbine with movable dual blades produces a constant torque and tip speed ratio at various flow rates.

• 한국기계가공학회지
• /
• 제11권5호
• /
• pp.29-34
• /
• 2012

This study describes the selection of optimum machining conditions for a high-hardness resin by using a large 5-axis machine. The experiments were conducted to examine the main factors that affect the surface roughness, such as the spindle speed, axial and radial depths of the cut, and pattern of the cutter path. To analyze the experiment results, the factor with the biggest impact on machining was determined using the smaller-the-better characteristic of the Taguchi method; the effectiveness of the experiment was then confirmed by verifying the selected optimum machining condition.

• 수산해양기술연구
• /
• 제30권3호
• /
• pp.182-188
• /
• 1994

In recent years, navigational and fisheries instruments are rapidly advancing. Especially data processing. data transferring and data interchange throughout the digital signals has been in high progress. Even though the ship's heading is also provided by a gyro-compass, an electro-magnetic compass studying by us currently is easy to issue adequate data to instruments requiring the information for the ship's heading. especially in small fishing boats. As the main element of the electro-magnetic compass is a three-axis magnetic sensors, the developing of the high performance sensor is in highly necessity in the beginning. This paper describes on the development of electro-magnetic compass of three-axis fixed type by using three-axis detection new type magnetic sensor without gimbals. even though usual electro-magnetic compass have to need necessarily a gimbal system in order to keep horizontal condition of the compass.

• 한국정밀공학회지
• /
• 제32권1호
• /
• pp.89-96
• /
• 2015

In this paper, it is studied that kinematic analysis of a 5-axis ultrasonic inspection equipment. The equipment is comprised of three straight axes and two rotary axes. With features of ultrasonic, the transmitter and receiver of the equipment are vertical to a test surface, operating at regular intervals. To perform this well, the motions of every link should be found on the based of kinematic analysis of the equipment. We chose starting point for testing and defined relations among all links through transformation of coordinates. For double curvature-shaped test object, we generated test paths. To follow these, we found motions of all links using inverse kinematics. By using Matlab/Simulink, simulator was developed, so that we could find out desired trajectories of main axes for a scan.

• 대한전기학회논문지
• /
• 제45권2호
• /
• pp.185-192
• /
• 1996

This paper presents a design of vertical axis Darrieus wind turbine combine with Savonius for wind-power generating system to be adapted for variable wind speed. The wind turbine consists of two troposkien- and four Savonius-blades. Darrieus turbine is designed with diameter 9.4[m], chord length 380[mm], tip speed ratio 5. Savonius turbine is designed with diameter 1.8[m], height 2[m], tip speed ratio 0.95. The design of turbine is laid for the main data of rated wind speed 10[m/s], turbine speed 101.4[rpm]. The generating power is estimated to maximum power 20[kW], and this is converted to commercial power line by means of three phase synchronous generator-inverter system. Generating system is designed for operation on VSVF(variable speed variable frequency) condition and constant voltage system.

• 건축역사연구
• /
• 제14권2호
• /
• pp.41-55
• /
• 2005

Temple with Multi-Buddha's Pavilions is a temple consisting of more than 2 Buddha's Pavilions. Individual Buddha's Pavilions tend to form distinguished area, or to keep independent axis from other Buddha's Pavilions. This study is to understand the philosophy of layout of individual Buddha's Pavilions located in the Temple with Multi-Buddha's Pavilions. To investigate a relationship to layout of individual Buddha's Pavilions on the basis of Buddhism doctrine makes us to understand philosophies about temple layout which temple constructors had. Bulkooksa, a temple having several pavilions placed in parallel, integrates diverse philosophies such as Vairocana Buddha-Ksetra from Vairocana Buddha's Pavilion, Sakyamuni Buddha-Ksetra from both Sakyamuni Buddha's Pavilion and two stupa, and Amitayus Buddha-Ksetra (Sukhavati) from Amitayus Buddha-Ksetra Pavilion. Sakyamuni Buddha's Pavilion and Amitayus Buddha's Pavilion are placed east to west in parallel, and Vairocana Buddha's Pavilion is placed behind them. Beobjusa, a temple having several pavilions placed cross axis, combines three axes such as the first, main axis linking Kumkang Gate - Chunwang Gate - Palsang Pavilion - Amitayus Buddha's Pavilion - Sakyamuni Buddha's Pavilion, the second axis linking Palsang Pavilion -Maitreya Pavilion, and the third axis linking Amitayus Buddha's Pavilion - Avalokiteshvara Pavilion. Relationship among each Buddha's land is clearly expressed by means of this cross axis layout of Buddha's Pavilions, reflecting a philosophy of rebirth in Nirvana that Wonhyo and Eusang propagated. Buseoksa, a temple having several pavilions placed the before and the behind, combines three Buddha's lands such as Maitreya Buddha-Ksetra, Amitayus Buddha-Ksetra and Vairocana Buddha-Ksetra, by means of arrangement of Maitreya Pavilion, Anyang Pavilion and Amitayus Buddha's Pavilion at bended axis, and east facing Amitayus Buddha. By investigating the philosophy of Temple layout with Multi-Buddha's Pavilions in this study, Buddha's Land conception, for people, that ancient Korean temples have, is understood.