• 한국소음진동공학회논문집
• /
• 제18권6호
• /
• pp.619-623
• /
• 2008

As higher reliability and accuracy on production facilities are required to detect incipient faults, a diagnostic system for predictive maintenance of the facility is highly recommended. In this paper, it presents a study on the application of vibration signals to diagnose faults for a rotating machinery using the Mahalanobis distance-Taguchi system. RMS, crest factor and Kurtosis that is known as the statistical methods and the spectrum analysis are used to diagnose faults as parameters of Mahalanobis distance.

• 응용통계연구
• /
• 제25권4호
• /
• pp.589-603
• /
• 2012

Mahalanobis-Taguchi system(MTS) is a statistical tool for classifying the normal group and abnormal group in multivariate data structures. In addition to the classification itself, the MTS uses a method for selecting variables useful for the classification. This method can be used efficiently especially when the abnormal group data are scattered without a specific directionality. When the feedback adjustment procedure through the measurements of the process output for controlling process input variables is not practically possible, the reset procedure can be an alternative one. This article proposes a reset procedure using the MTS. Moreover, a method for identifying input variables to reset is also proposed by the use of the contribution. The identification of the root-cause parameters using the existing dimension-reduced contribution tends to be difficult due to the variety of correlation relationships of multivariate data structures. However, it became possible to provide an improved decision when used together with the location-centered contribution and the individual-parameter contribution.

• 한국HCI학회:학술대회논문집
• /
• 한국HCI학회 2007년도 학술대회 3부
• /
• pp.189-193
• /
• 2007

필적 감정은 개인의 고유한 필적 개성을 이용하여 임의의 두 필기 문장 또는 텍스트가 동일인에 의해 작성되었는지를 판별하는 기술로 유서대필 및 보안수사, 서명의 검증, 범죄 수사 등에 활용되어지고 있다. 이러한 작업은 감정 전문가의 판단기준에 의해 필적의 유사성을 판별하기 때문에 객관성 결여 및 과도한 소요 시간, 과도한 처리비용의 문제를 내포하게 된다. 이러한 문제를 해결하여 판별의 객관성과 업무의 신속한 처리를 가능하게 하기 본 논문에서는 컴퓨터를 통한 패턴 분석을 적용하여 두 필적의 유사성을 판별하는 방법을 본 논문에서는 제안한다. 이를 위하여 본 논문은 학습단계와 자동분석단계로 나뉘며, 학습단계에서는 입력된 문서영상에서 필적의 영역을 추출한 후, 특징을 추출하고 DTW연산을 통하여 학습을 한다. 자동분석단계에서는 대조할 문서영상에서의 특징을 추출하고 입력된 문서영상과 대조할 문서영상간의 마할라노비스 거리(Mahalanobis Distance)를 구하여 서명 및 필적에 대한 유사도를 도출한다. 실험은 4명의 필적을 이용하여 비교하였으며, 우수한 결과를 보였다.

• 제어로봇시스템학회논문지
• /
• 제4권3호
• /
• pp.334-341
• /
• 1998

This paper proposes an algorithm to obtain the time-to-contact between an observer and a target and surface orientation of the target. These two physical elements are computed from the image deformation of a known shape, which is extracted by supervised classification of detected line segments based on MAP and Mahalanobis distance. The proposed algorithm was applied to the natural outdoor traffic scene and would contribute to the development for a collision avoidance system.

• Journal of Pharmaceutical Investigation
• /
• 제30권2호
• /
• pp.85-91
• /
• 2000

We have studied the dissolution kinetics of two fast releasing tablets in four media, and the similarity of dissolution profiles was compared using 3 methods. Two of the methods were introduced from statistical algorithm of distance methods, which are maximum distance and Mahalanobis distance. The dissolution kinetics were also analysed using FDA method for similarity evaluation, and the results were compared with those obtained using the distance methods.

• 품질경영학회지
• /
• 제33권2호
• /
• pp.64-73
• /
• 2005

In this paper, we introduce MTS(Mahalanobis-Taguchi System) Method which is suggested Dr. Taguchi in later 1990. We apply MTS Method for Quality Competitive Appraisal System(QCAS) Model which is executived from 1997 by Agency for Technology and Standards, Ministry of Commerce, Industry and Energy(MOCIE). We can measure company Quality competitive by using MTS. MTS Measure can not be compared statistical sum by calculated QCAS. MTS can be possible distinct subtle which can not distinct using statistical sum. Also MTS Method can seek more strong effect factor among of many factor. If A Company use MTS Method, can find vital factor and level of destination.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.346-353
• /
• 2013

Industrial processes need to be monitored in real-time based on the input-output data observed during their operation. Abnormalities in an induction motor should be detected early in order to avoid costly breakdowns. To early identify induction motor faults, this paper effectively estimates spectral envelopes of each induction motor fault by utilizing a linear prediction coding (LPC) analysis technique and an expectation maximization (EM) algorithm. Moreover, this paper classifies induction motor faults into their corresponding categories by calculating Mahalanobis distance using the estimated spectral envelopes and finding the minimum distance. Experimental results shows that the proposed approach yields higher classification accuracies than the state-of-the-art approach for both noiseless and noisy environments for identifying the induction motor faults.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2024년도 춘계학술발표대회
• /
• pp.764-767
• /
• 2024

웨어러블 디바이스에서는 사용자의 다양한 메타데이터를 수집할 수 있다. 그러나 이런 개인정보를 함유하고 있는 데이터를 수집하는 것은 사용자에게 개인정보침해 위협을 야기한다. 때문에 본 논문에서는 개인정보보호를 통한 웨어러블 디바이스 데이터활용방안으로 연합학습을 채택하였다. 다만 기존 연합학습에서도 해결해야할 문제점들이 있다. 우리는 그중에서도 데이터이질성(Data Heterogeneity) 문제해결을 위해 군집화(Clustering) 방법을 활용하였다. 또한 기존의 코사인유사도 기반 군집화에서 파라미터중요도가 반영되지 않는다는 문제점을 해결하고자 데이터수 기반 마하라노비스거리(Number of Samples Mahalanobis Distance) 군집화 방법을 제시하였다. 이를 통해 WESAD(Werable Stress Affect Detection)데이터에서 피실험자의 데이터 이질성이 존재하는 상황에서 기존 연합학습보다 학습 안정성 측면에서 좋음을 보여주었다.

• 응용통계연구
• /
• 제29권7호
• /
• pp.1385-1398
• /
• 2016

원자력 발전소의 가압기는 1차 계통의 냉각재가 고온에서도 기화되지 않도록 압력을 가해주는 장치이다. 즉, 가압기의 고장은 원자력 발전소에 큰 영향을 미칠 수 있으며, 따라서, 가압기의 조기 고장 감지는 원자력 발전소의 안전에 매우 중요하다. 이를 위해, 본 연구에서는 마할라노비스 거리 개념과 다구찌 품질 공학 이론에 기반한 패턴 분류 인식 알고리즘 중 하나인 마할라노비스 다구찌 시스템(MTS)을 가압기 압력 제어 계통의 조기 고장 감지에 적용하였다. MTS의 고장 감지 성능을 검증하기 위해, 실제 원자력 발전소에서 발생하고 있는 가압기 압력전송기 고장 시나리오를 대상으로 하여, Full Scope 시뮬레이터를 통해 모사된 데이터에 적용하였다. 실험 결과, MTS는 단일 센서모니터링 기반의 전통적인 고장 감지에 비하여 매우 빠르게 고장을 감지할 수 있었다.

• 한국생산제조학회지
• /
• 제22권1호
• /
• pp.22-28
• /
• 2013

Robotic GMA (Gas Metal Arc) welding process is one of widely acceptable metal joining process. The heat and mass inputs are coupled and transferred by the weld arc to the molten weld pool and by the molten metal that is being transferred to the weld pool. The amount and distribution of the input energy are basically controlled by the obvious and careful choices of welding process parameters in order to accomplish the optimal bead geometry and the desired quality of the weldment. To make effective use of automated and robotic GMA welding, it is imperative to predict online faults for bead geometry and welding quality with respect to welding parameters, applicable to all welding positions and covering a wide range of material thickness. MD (Mahalanobis Distance) technique was employed for investigating and modeling the GMA welding process and significance test techniques were applied for the interpretation of the experimental data. To successfully accomplish this objective, two sets of experiment were performed with different welding parameters; the welded samples from SM 490A steel flats. First, a set of weldments without any faults were generated in a number of repeated sessions in order to be used as references. The experimental results of current and voltage waveforms were used to predict the magnitude of bead geometry and welding quality, and to establish the relationships between weld process parameters and online welding faults. Statistical models developed from experimental results which can be used to quantify the welding quality with respect to process parameters in order to achieve the desired bead geometry based on weld quality criteria.