• International Journal of Precision Engineering and Manufacturing
• /
• v.8 no.2
• /
• pp.70-74
• /
• 2007

This paper describes the development of a nano-positioning system for nanoscale science and engineering. Conventional positioning systems, which can be expensive and complicated, require the use of laser interferometers or capacitive transducers to measure nanoscale displacements of the stage. In this study, a new self-displacement sensing (SDS) nano-stage was developed using mechanical magnification of its displacement signal. The SDS nano-stage measured the displacement of its movement using a position-sensitive photodiode (PSPD), a laser source, and a hinge-connected rotating mirror plate. A beam from a laser diode was focused onto the middle of the plate with the rotating mirror. The position variation of the reflected beam from the mirror rotation was then monitored by the PSPD. Finally, the PSPD measured the amplified displacement as opposed to the actual movement of the stage via an optical lever mechanism, providing the ability to more precisely control the nanoscale stage. The displacement amplification process was modeled by structural analysis. The simulation results of the amplification ratio showed that the distance variation between the PSPD and the mirror plate as well as the length L of the mirror plate could be used as the basic design parameters for a SDS nano-stage. The PSPD was originally designed for a total travel range of 30 to 60 mm, and the SDS nano-stage amplified that range by a factor of 15 to 25. Based on these results, a SDS nano-stage was fabricated using principle of displacement amplification.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.85-90
• /
• 2015

Purpose: Time of operation has been reduced and accuracy of operation has been improved since C-arm, which offer real-time image of patient, was introduced in operation room. However, because of the contamination of patient, C-arm could not be used more appropriately. Therefore, this study is to know factors of controlling exposure dose, image quality and the exposed dose of health professional in operation room. Materials and methods: Height of Wilson frame (bed for operation) was fixed at 130 cm. Then, Model 76-2 Phantom, which was set by assembling manual of Fluke Company, was set on the bed. Head/Spine Fluoroscopy AEC mode was set for exposure condition. According to detector size of C-arm, the absorbed dose per min was measured in the 7 steps OFD (cm) from 10 cm to 40 cm (10, 15, 20, 25, 30, 35, 40 cm). In each step of OFD, the absorbed dose per min of same diameter of collimation was measured. Moreover, using Nero MAX Model 8000, exposure dose per min was measured according to 3 step of distance from detector (20 cm, 60 cm, 100 cm). Finally, resolution was measured by CDRH Disc Phantom and magnification of each OFD was measured by aluminum stick bar. Result: According to detector size of C-arm, difference of absorbed dose shows that the dose of 20 cm OFD is 1.750 times higher than the dose of 40 cm OFD. It means that the C-arm, which has smaller size of detector, shows the bigger difference of absorbed dose per min (p<0.05). In the difference of absorbed dose in the same step of OFD (from 20 cm to 40 cm), the absorbed dose of 9 inch detect or C-arm was 1.370 times higher than 12 inch' s (p<0.05). When OFD was set to 20 cm OFD, the absorbed dose of non-collimation case was approximately 0.816 times lower than the absorbed dose of collimation cases (p<0.05). When the distance was 20 cm from detector, exposed does includes first-ray and scatter-ray. When the distance was 60 cm and 100 cm from detector, exposed does includes just scatter-ray. So, there was the 2.200 times difference of absorbed does. Finally, when OFD was increased, spatial resolution was 4 to 5 step was increased. However, low contrast resolution was not relative. Moreover, there was 1.363 times difference of magnification (p<0.05). Conclusion: When C-Arm is used, avoiding contamination of patient is more important factor than reducing exposed dose of health professional in operation room. Just controlling exposure time is just way to reduce the exposed does of workers. However, in the case, non-probability influence could be occurred. Therefore, this study proved that the exposed dose will be reduced if the factors such as using small detector size of C-arm, setting OFD from 20 cm to 25 cm and non-collimating. Moreover, dose management of C-arm in the non-interesting area will be considered additionally.

• Korean Journal of Culture and Social Issue
• /
• v.21 no.2
• /
• pp.177-203
• /
• 2015

The aims of this study were 1) to compare irrational gambling beliefs of gamblers and non-gamblers, 2) to investigate the role of cognitive error on winning probability thinking error, and 3) to examine the relationship between attributional bias and gambling behavior. A total of 248 subjects were recruited for this study. All subjects were classified into non-gamblers, social gamblers and pathological gamblers, and administered self-report questionnaires to measure irrational gambling beliefs, the probability inference error, the attriburional style, and the attributional bias. A pathological gambler group scored highest on irrational gambling beliefs, especially the overestimation of self-ability factor, and a social gambler group and a non-gambler group follow. All three groups scored higher on the magnification of gambling skills than the mean (4.0) of the scale. Pathological gamblers and social gamblers scored higher on the probability thinking error than non-gamblers. Pathological gamblers displayed higher external attribution, lower internal attribution in their daily life events and higher internal attribution in failure situation than social gamblers and non-gamblers. The results indicate that cognitive errors would be a factor that differentiates pathological gamblers from social gamblers and non-gamblers. In predicting gambling behaviors, overestimation of self-ability of irrational gambling beliefs, internal attribution in failure situation, external attribution in daily live event, and probability thinking error were identified as significant factors. It is concluded that a public education about common cognitive bias featured in gamblers might be important in prevention of pathological gambling behaviors.

• Journal of Chest Surgery
• /
• v.39 no.11 s.268
• /
• pp.805-809
• /
• 2006

Background: In our previous study, we demonstrated that transforming growth factor-beta 1 receptor II(TGF-${\beta}1RII$) may have a role in the formation of bullae. In this study, we investigated if expression of transforming growth factor-beta 1 (TGF-${\beta}1$) ligand was altered in a bullous lung tissue by immunohistochemical staining of bullous tissues from patients with primary spontaneous pneumothorax. Material and Method: Bullous lung tissues were obtained from 36 patients with primary spontaneous pneumothorax, including 34 males and 2 females aged 14 to 38 years old. Result: Of the 36 patients, 19 were TGF-${\beta}1$ positive and 24 were transforming growth factor-beta 1 receptor II(TGF-${\beta}1RII$) positive. Among the 19 TGF-${\beta}1$ positives, 15 were also TGF-${\beta}1RII$ positive, observation at high magnification showed that strong immunohistochemical stain was detected in the boundary region between the bullous and normal lung tissues. Conclusion: These results suggest that overexpression of TGF-${\beta}1$ may be involved in the formation of a bulla as well as the alteration of TGF-${\beta}1RII$ expression. Further molecular studies are needed to elucidate the more detailed molecular mechanisms of the bulla formation.

• Journal of radiological science and technology
• /
• v.39 no.2
• /
• pp.135-142
• /
• 2016

The purpose of this study is to evaluate propriety of using SID 180cm at Chest PA examination and to find effect of geometrical cause to the image. XGEO-GC80, INNOVISION-SH, CXDI-40EG detector and a chest phantom designed self-production was used for this study. Images were acquired at SID 180cm with changing the factor OID as 0, 75 and 83mm and were analyzed by Centricity Radiography RA1000 PACS system. Statistical program was used the SPSS (Version 22.0, SPSS, Chicago, IL, USA), p-value(under 0.05) was considered to be statistically significant. In OID 0 mm was enlarged about 2.7~3.5 mm than the actual degree of the HS, BS of phantom in all equipments. Compared with the calculated magnification has been expanded 1.6~2.8% when viewed. The OID 75 mm with OID 83 mm was extended from the CS and BS 6~8 mm range. Compared to the calculated values, the measured values are expanded from 6.1 to 7.9%. CS and BS according to the OID change showed a statistically significant difference (p<0.05) among each group, the post-analysis only OID 0 mm group appeared as an independent group, 75 mm and 83 mm are separated in the same group It was. But had no statistically significant difference could change depending on the OID (p>0.05), post-mortem analysis showed, both in the same group. Heart sizes appears larger than actual size 6~8 mm at chest PA examination which is enlarged 6.1~7.9% more than the actual theoretical value. We can find magnification of the image because of the increase of the OID due to technical limitations between cover of standing detector and the image plate. so we suggest to have occurred between them when considering the need to adjust the equipment installed by the SID to match the characteristics of the equipment.

• Restorative Dentistry and Endodontics
• /
• v.36 no.6
• /
• pp.465-476
• /
• 2011

In current endodontic practice, introduction of operating microscope, ultrasonic instruments, and microinstruments has induced a big change in the field of surgical retreatment. In this study, we aimed to offer key steps of endodontic microsurgery procedure compared with traditional root-end surgery, and to evaluate factors influencing success and failure based on published articles. Endodontic microsurgery is a surgical procedure performed with the aid of a microscope, ultrasonic instruments and modern microsurgical instruments. The microscope provides magnification and illumination - essential for identifying minute details of the apical anatomy. Ultrasonic instruments facilitate the precise root-end preparation that is within the anatomical space of the canal. Modern endodontics can therefore be performed with precision and predictability, thus eliminating the disadvantages inherent in traditional periapical surgery such as large osteotomy, beveled apicoectomy, inaccurate root-end preparation and the inability to observe isthmus. Factors influencing the outcomes of endodontic microsurgery may be diverse, but standardization of procedures can minimize its range. Among patient and tooth-related factors, periodontal status and tooth position are known to be prognostic, but there are only few articles concerning this matter. High-evidence randomized clinical trials or prospective cohort studies are needed to confirm these findings.

• The Journal of Korean Academy of Prosthodontics
• /
• v.36 no.3
• /
• pp.468-482
• /
• 1998

Since the concept of osseointegration was introduced by Branemark of Sweden, dental implants have been used for various dental prosthetic treatments. The survival rate of dental implant is likely to be closely related to the total biomechanical role of each component of implant system. The use of interchangeable component is very attractive for dental practitioners because such an approach would save treatment cost, flexibility of prosthetic treatment options as well as conveniences. Therefore, the use of interchangeable implant system has been increasing without scientific assessment of safety and efficacy of various interchangeable implant system. The purpose of this study, therefore, were to compare the geometric characteristic of four interchangeable dental implant screws and the loosening torque of these screws. Four types of dental implant screws tested in this study were Nobelpharma, 3i, Impla-med, Restore. Four screws each of the test specimens were subjected for scanning electron microscopic examinations under the same condition and a 35x magnified standard SEM picture was objected from each test specimen using JSM-5200 scanning microscope. From each of the SEM pictures, eight parameters. i.e., diameter of screw head. screw length, thread pitch, major diameter. neck diameter, neck length, crest width and root width were determined using a caliper. The measurement for each parameters were then corrected for their magnification factor. The loosening torque were also determined by using a torque gauge. All of the measurements were statistically analyzed by ANOVA test and multiple range test. Statistical significance was set in advance at the probability level of less than 0.05. All analyses were done with SPSS software for the personal computer. The conclusion obtained from this studies were summarized as the following; 1. No statistically significances were noted in the thread pitch. and crest width in the four screws, and in the case of major diameter, the Impla-med screw was significantly smaller than the other three screws (p<0.05). Therefore, four implant bolts could be physically inserted in a abutment nuts. 2. The diameter of screw head was decreased in the order of Restore, 3i, Nobelpharma, Impla-med screws and the length of screws were decreased in the order of 3i, Restore, Nobelpharma and Impla-med. The diameter of neck was decreased in the order of Impla-med, Restore. Nobelpharma, 3i screws. The differences of each of these parameters were statistically significant (p<0.05). The width of root of screws were decreased in the order of Nobelpharma, Impla-med, Restore and 3i. The differences among Nobelpharma and Impla-med. Restore and 3i were statistically significant (p<0.05). 3. When the screws were loosening 1, 3, 4 and 5 times, the loosening torque for Impla-med and 3i screws were significantly higher than that of Nobelpharma or Restore screws (p<0.05). However, when statistically smaller than that of 3i, Restore or Nobelpharma screws(p<0.05).

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.27 no.4
• /
• pp.340-360
• /
• 1982

Because of the continuing rapid increase in pesticide usage in Taiwan, much attention has been focus on pesticide contamination of food and effect of pesticides on human and environmental health. The Plant Protection Center (PPC) conducts safety evaluation of pesticides usee! in Taiwan. The pesticides are classified into different groups based on their acute toxicities. Pesticides which are classified into extremely toxic group are not allow to used on short term crops or the continuously harvest crops. The acute toxicity of pesticides to the beneficial insects are also studied, special attention has been paid to the two predators of rice brown planthopper. 60% of cultivated land in Taiwan are paddy field; therefore, acute fish toxicity was taken into consideration when a pesticide was applied for registration to be used in the paddy. Fish toxicities were evaluated by the dangerous rating value which is the amount of pesticide residue in the field water over the TLM value. Mutagenicity of pesticides was continuously evaluated by using Arne's microbial testing method. Island wide survey of residual levels of pesticides of known pollutants such as chlorinated hydrocarbon . insecticides, mercurial compounds in soil, water and biological samples were carried out constantly. The potential of a new1y Imported esticides to pollute the environment were studied by using model ecosystem. Ecological magnification (EM) of a chemical was calculated from model ecosystem. A chemical was considered as a pollutant when its EM value over 5000. In order to ensure the levels of pesticides residue of the crop within the safety limit. The 'tolerance' of pesticides on different crop groupings were established base on 1) acceptable daily intake value of individual pesticides, 2) average daily consumption of each crop groupings by Chinese person, 3) Actual residues of pesticides. on different crops obtained from supervised trials. Total about 79 pesticides for which the tolerances have been established on different crop groupings. Because the intensive agricultural system was adopted in Taiwan. The phytotoxicity of pesticides to the non-target crops was therefore become one of the important factor in the safety evaluation of pesticide usage. These will include 1) direct injury, 2) injury caused by pesticide polluted irrigation water, 3) injury caused by the pesticide polluted soil, 4) reduction of growth caused by the effect of pesticide on the soil microorganisms. This paper will reviewed all the aspects mentioned in the previous .paragraphs. Most the works have done in Taiwan by the PPC.y the PPC.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.39 no.4
• /
• pp.106-113
• /
• 1997

Dynamic loading of structures often causes excursions of stresses well into the inelastic range, and the influence of the geometric changes on the dynamic response is also significant in many cases. Therefore, both material and geometric nonlinearity effects should be considered in case that a dynamic load acts on the structure. A structure in a nuclear power plant is a structure of importance which puts emphasis on safety. A nuclear container is a pressure vessel subject to internal pressure and this structure is constructed by a reinforced concrete or a pre-stressed concrete. In this study, the material nonlinearity effect on the dynamic response is formulated by the elasto-viscoplastic model highly corresponding to the real behavior of the material. Also, the geometrically nonlinear behavior is taken into account using a total Lagrangian coordinate system, and the equilibrium equation of motion is numerically solved by a central difference scheme. The constitutive relation of concrete is modeled according to a Drucker-Prager yield criterion in compression. The reinforcing bars are modeled by a smeared layer at the location of reinforcements, and the steel layer model under Von Mises yield criteria is adopted to represent an elastic-plastic behavior. To investigate the dynamic response of a nuclear reinforced concrete containment structure, the steel-ratios of 0, 3, 5 and 10 percent, are considered. The results obtained from the analysis of an example were summarized as follows 1. As the steel-ratio increases, the amplitude and the period of the vertical displacements in apex of dome decreased. The Dynamic Magnification Factor(DMF) was some larger than that of the structure without steel. However, the regular trend was not found in the values of DMF. 2. The dynamic response of the vertical displacement and the radial displacement in the dome-wall junction were shown that the period of displacement in initial step decreased with the steel-ratio increases. Especially, the effect of the steel on the dynamic response of radial displacement disapeared almost. The values of DMF were 1.94, 2.5, 2.62 and 2.66, and the values increased with the steel-ratio. 3. The characteristics of the dynamic response of radial displacement in the mid-wall were similar to that of dome-wall junction. The values of DMF were 1.91, 2.11, 2.13 and 2.18, and the values increased with the steel-ratio. 4. The amplitude and the period of the hoop-stresses in the dome, the dome-wall junction, and the mid-wall were shown the decreased trend with the steel-ratio. The values of DMF were some larger than those of the structure without steel. However, the regular trend was not found in the values of DMF.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.1
• /
• pp.49-60
• /
• 2017

In this paper, we presented the result of the study on high-power handling capability of the X-band circular waveguide cavity filter configured at the output of high power amplifier(120 W) for geostationary satellites. The dual mode circular waveguide cavity filter with 6th order is selected and the physical model of the filter is designed after determination of the size of resonator from mode chart. Multipactor margin analysis is performed by the SEM method and the VMF method. The result shows that the VMF method predicts lower multipactor breakdown thresholds than the SEM method. Evaluating the multipactor margin obtained by the VMF method to ECSS criteria, we could decide to perform multipactor test. The multipactor test conducted in ESA facility shows that multipactor did not occur even until the RF power increased up to 540 W. In consequence, by both analysis and test, we could verify that the X-band circular waveguide cavity filter has the sufficient high-power handling capability to operate on orbit.