• 한국자기학회지
• /
• 제5권5호
• /
• pp.570-574
• /
• 1995

Magnetoresistance of NiFeCo/Cu/NiFeCo/FeMn uncoupled exchange biased sandwiches has been studied. The magnetoresistance change ratio, ${\Delta}R/R_{s}$ showed 4.1 % at a saturation field as low as 11 Oe in $Si/Ti(50\;{\AA})/NiFeCo(70\;{\AA})/Cu(23\;{\AA})/NiFeCo(70\;{\AA})/FeMn(150\;{\AA})/Cu(50\;{\AA})$ spin valve structure. In this system, the magnetoresistance was affected by interlayer material and thickness. When Ti and Cu were used as the interlayer material in this structure, maximum magnetoresistance change ratio were 0.32 % and 4.1 %, respectively. 6.1 % MR ratio was obtained in $Si/Ti(50\;{\AA})/NiFeCo(70\;{\AA})/Cu(15\;{\AA})/NiFeCo(70\;{\AA})/FeMn(150\;{\AA})/Cu(50\;{\AA})$ spin valve structure. The magnetoresistance change ratio decreased monotonically as the interlayer thickness increased. It was found that the exchange bias field exerted by FeMn layer to the adjacent NiFeCo layer was ~25 Oe, far smaller than that reported in NiFe/Cu/NiFe/FeMn spin valve structure(Dieny et. al., ~400 Oe). The relationship between the film texture and exchange anisotropy ha been examined for spin valve structures with Ti, Cu, or non-buffer layer.

• 한국자기학회지
• /
• 제6권3호
• /
• pp.189-193
• /
• 1996

Magnetoresistance field sensitivity and magnetostriction were measured as a function of annealing temperature for NiFe/Ag multilayer systems displaying giant magnetoresistance. Key multilayer configurations such as number of NiFe/Ag bilayers and Ag spacer thickness were varied. A high giant magnetoresistance ratio up to 5% with zero magnetostriction and high magnetoresistance field sensitivity was possible to achieve simultaneously with optimal sample geometry and annealing condition.

• Journal of Magnetics
• /
• 제6권3호
• /
• pp.83-85
• /
• 2001

The magnetoresistance properties of NiO/NiFe/Cu/NiFe spin valve film deposited on MgO(100) substrate with YBa$_2$$Cu_3O_7$(YBCO) film were investigated at room temperature and at 77 K. The magnetoresistance (MR) curves of the hybrid superconductor-magnetoresistor film structure showed an exchange coupling field of 300 Oe and an inverse magnetoresistance ratio of -6.5%. The magnetization configurations of the two magnetic layers in the NiO spin valve were antiparallel due to an increment in the conduction electron flow to superconductor YBCO film. This sample showed an inverse MR ratio.

• Journal of Magnetics
• /
• 제7권3호
• /
• pp.98-100
• /
• 2002

Tunnel magnetoresistive devices using an individual multi-walled carbon nanotube were fabricated and their low-temperature electrical transport propertiers were investigated. With the ferromagnetic Co electrodes, the multi-walled carbon nanotube exhibited hysteretic magnetoresistance curve at low temperatures. Depending on the temperature and the bias current, the magnetoresistance ratio can be as high as 16% at the temperature of 2.2 K. Such high magnetoresistance ratio indicates a long diffusion length of the multi-walled carbon nanotube.

• E2M - 전기 전자와 첨단 소재
• /
• 제10권10호
• /
• pp.1016-1021
• /
• 1997

Magneto resistance properties in spin-valve sandwiches with various thickness of nanmagnetic layer in contact with the ferromagnetic NiFe film were investigated. The NiFe layer in contact with the NiO film was pinned by strongly exchange-biased coupling and the free NiFe layer at the film surface induced a sharp change in the magnetoresistance at -5~15Oe due to small coercivity. The NiO/NiFe/Cu/NiFe film showed a magnetoresistance ratio in the range of 2.3~2.9% and a field sensitivity above 2.2%/Oe with various of nonmagnetic layer. The NiO/NiFe/Cu/NiFe film of the field sensitivity above 2.2%/Oe suggests stang possibility of magnetic sensor matter.

• 한국자기학회지
• /
• 제5권5호
• /
• pp.451-455
• /
• 1995

The composition and thickness dependence and the ferromagnetic under- and overlayer effect on the magnetoresistance ratio and saturation field of the Co-Ag nano-granular films were investigated. The maximum magnetoresistance (23% at R.T.) in the as-deposited state was obtained in the $3000{\AA}$ $Co_{30} Ag_{70}$ bare alloy film. As the thickness of the alloy films decreased below $500{\AA}$, the MR ratio decreased because of the resistivity increase and the non-uniform film formation. We showed that the ferromagnetic over- and underlayer could reduce the saturation field of the nano-granular films via exchange coupling effect. The magnetoresistance and the saturation field of the $100{\AA}$ alloy film were 3.65 % and 2.85 kOe respectively and those of the under- and overlayered alloy films with $200{\AA}$ Fe were 3.3 % and 1.23 kOe respectively.

• 한국표면공학회지
• /
• 제32권1호
• /
• pp.61-66
• /
• 1999

The Spin-dependent tunneling magnetoresistance (TMR) effect was observed in $NiFe/Al_2O_3$/Co thin films. The samples were prepared by magnetron sputtering in a system with a base pressure of $3\times10^{-6}$Torr. the insulating $Al_2O_3$layer was prepared by r.f. plasma oxydation method of a metallic Al layer. The ferromagnetic and insulating layers were deposited through metallic masks to produce the cross pattern form. The junction has an active area of $0.3\times0.3\textrm{mm}^2$ and the $Al_2O_3$layer is deposited through a circular mask with a diameter of 1mm. It is very important that insulating layer is formed very thinly and uniformly in tunneling junction. The ferromagnetic layer was fabricated in optimum conditions and the surface of that was very flat, which was observed by AFM. Tunneling junction was confirmed through nonlinear I-V curve. $NiFe/Al_2O_3$/Co junction was observed for magnetization behavior and magnetoresistance property and magnetoresistance property is dependent on magnetization behavior and magnetoresistance property and magnetoresistance property is dependent on magnetization behavior of t재 ferromagnetic layer. The maximum magnetoresistance ratio was about 6.5%.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.282-287
• /
• 1998

유리 기판위에 dc magnetron sputtering 방법으로 제작한Fe(50 $\AA$)/[Co(17 $\AA$)/Cu(24 $\AA$)]20 다층박막에 관하여 자기저항비의 기저층, 자성층, 비자성층의 증착률 및 열처리 의존성을 살펴보았다. 낮은 base 압력 중에서의 막의 증착은 Co/Cu 계면의 산화를 억제하여 자기저항비를 장가시켰다. 극대 자기저항비를 얻기위해 요구되는 증착률은 Fe는 1$\AA$)/s 이상, Cu는 2.8 $\AA$)/s 이었으며 Co는 증착률이 2 $\AA$/s 보다 높은 경우에 평탄한 자구형성을 이루어 자기적 향비가 높아지는 경향을 보였다. 40$0^{\circ}C$까지의 시료에 대한 역처리는 다층박막의 주기성을 유지한채 더 큰 결정립을 형성시켜 반강자성적으로 결합한 막의 부분이 증가함으로써 자기저항비를 증가시켰다.

• 한국산학기술학회논문지
• /
• 제7권5호
• /
• pp.811-816
• /
• 2006

이방성 자기저항효과(anisotropic magnetoresistance : AMR)는 단층 자성박막으로 구성되므로 경제성 있게 박막화 시켜서 소형화가 가능하다. 기존의 급속응고법으로 생산된 리본형 MCo(M=Cu, Ag) 소자가 경제적으로 공업적 목적을 달성하였으나, 리본형 특유의 두께와 가공성이 부족하여 소형 소자에 함께 집적하기 곤란한 단점이 있었다. 새로운 박막형을 쓰면 추가 열처리 없이 기존의 리본형 소자와 비교하여 박막상태로 적절한 AMR 특성이 나오는지와 최적 AMR을 얻기 위한 Co의 조성을 아는 것이 중요하다. 열증착기를 써서 100nm의 $Cu_{1-x}Co_x$와 $Ag_{1-x}$ 박막을 Co의 조성을 $10{\sim}70wt%$로 달리하며 제작하여 이때의 자기적 특성을 확인하였다. CuCo는 40% Co에 0.5T에서 1.4%, AgCo는 30% Co에 2.6%의 MR비를 얻었고 이는 리본형 소자보다는 표면 산란 효과에 의해 MR비는 작지만 표면산화막 없이 직접 다른 소자공정과 함께 진행할 수 있는 장점이 있음을 확인하였다.

• E2M - 전기 전자와 첨단 소재
• /
• 제9권10호
• /
• pp.1060-1065
• /
• 1996

We have studied the magnetoresistance phenomena on spin valve thin films of antiferromagnetic NiO/CoO. Interlayer coupling oscillates between the antiferrocoupling and ferrocoupling with the variation of Cu thickness. The exchange coupling strength between NiO (antiferromagnetic) and NiFe(ferromagnetic) as a function of NiO texture and interface roughness is investigated by CoO insertion. CoO has significantly higher anisotropy in the (111) plane and interface roughness. It seems that the MR-ratio is increased by CoO inserted films. From the AFM and XRD data, the increase of MR-ratio and exchange field is influenced by the roughness of CoO.