• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.10-13
• /
• 2016

In this study, we developed a new volume reduction technique for cesium contaminated soil by magnetic separation. Cs in soil is mainly adsorbed on clay which is the smallest particle constituent in the soil, especially on paramagnetic 2:1 type clay minerals which strongly adsorb and fix Cs. Thus selective separation of 2:1 type clay with a superconducting magnet could enable to reduce the volume of Cs contaminated soil. The 2:1 type clay particles exist in various particle sizes in the soil, which leads that magnetic force and Cs adsorption quantity depend on their particle size. Accordingly, we examined magnetic separation conditions for efficient separation of 2:1 type clay considering their particle size distribution. First, the separation rate of 2:1 type clay for each particle size was calculated by particle trajectory simulation, because magnetic separation rate largely depends on the objective size. According to the calculation, 73 and 89 % of 2:1 type clay could be separated at 2 and 7 T, respectively. Moreover we calculated dose reduction rate on the basis of the result of particle trajectory simulation. It was indicated that 17 and 51 % of dose reduction would be possible at 2 and 7 T, respectively. The difference of dose reduction rate at 2 T and 7 T was found to be separated a fine particle. It was shown that magnetic separation considering particle size distribution would contribute to the volume reduction of contaminated soil.

• 대한수학회논문집
• /
• 제38권2호
• /
• pp.589-598
• /
• 2023

Magnetic curves are the trajectories of charged particals which are influenced by magnetic fields and they satisfy the Lorentz equation. It is important to find relationships between magnetic curves and other special curves. This paper is a study of magnetic curves and this kind of relationships. We give the relationship between β-magnetic curves and Mannheim, Bertrand, involute-evolute curves and we give some geometric properties about them. Then, we study this subject for γ-magnetic curves. Finally, we give an evaluation of what we did.

• 한국초전도ㆍ저온공학회논문지
• /
• 제18권1호
• /
• pp.19-22
• /
• 2016

A Superconducting High Gradient Magnetic Separation (HGMS) system is proposed for treatment of feed-water in thermal power plant [1]. This is a method to remove the iron scale from feed-water utilizing magnetic force. One of the issues for practical use of HGMS system is to extend continuous operation period. In this study, we designed the magnetic filters by particle trajectory simulation and HGMS experiments in order to solve this problem. As a result, the quantity of magnetite captured by each filter was equalized and filter blockage was prevented. A design method of the magnetic filter was proposed which is suitable for the long-term continuous scale removal in the feed-water system of the thermal power plant.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1997년도 한국자동제어학술회의논문집; 한국전력공사 서울연수원; 17-18 Oct. 1997
• /
• pp.1557-1560
• /
• 1997

In this paper, we have built an experimental magnetic levitation system for a possible use of control education. We have give a mathermatical model of the nonlinear system and have shown the stability region of the linearized system when it is controlled by a PD controller. We also proposed a neural network control system which uses a neural network as a feedforward controller thgether with a conventional feedback PF controller. We have generated a desired output trajectory, which was designed for the benefit of the generalization of the neural network controller, and trained the desired output trajectory, which was desigend for the benefit of the generalization of the neural netowrk controller, and trained a neural network controller with the data of the actual input and the output of the system obtained by applying the desired output trajectroy. A good tracking performance was observed for both the desired trajectiories used and not used for the neural network training.

• Journal of Magnetics
• /
• 제13권4호
• /
• pp.157-159
• /
• 2008

The effect of the perpendicular field on the trajectory of a vortex core driven by spin-transfer torque was investigated using micromagnetic simulations. The trajectory of the vortex core was staggered due to distortions of the moving vortex core. The core trajectory was affected by both the perpendicular field and ${\beta}$ value, which is the relative magnitude of nonadiabatic spin torque to the adiabatic spin torque. This suggests that the effect of the perpendicular field should be considered when examining a vortex core trajectory affected by ${\beta}$.

• Investigative Magnetic Resonance Imaging
• /
• 제13권1호
• /
• pp.15-21
• /
• 2009

목적 : 나선 주사 영상에서 경사자계시스템의 회로 모델을 기반으로 실제 경사 자계를 추정하여 재구성에 사용함으로써 재구성 영상을 개선하는 방법을 제안하였다. 대상 및 방법 : 자기공명영상장치의 경사자계 시스템은 저항 성분과 자체 인덕턴스, magnet 시스템과의 상호 인덕턴스, 커패시턴스 성분 등을 가지고 있어서 경사자계 증폭기에 인가하는 입력 경사자계 파형과 실제 만들어지는 경사자계 사이에는 시간적인 지연과 함께 파형에도 차이가 있다. 나선주사 영상에서 실제 만들어진 경사자계 파형 및 k-space 궤적은 재구성 과정에서 매우 중요한 역할을 한다. 본 논문에서는 경사자계시스템을 회로 소자로 모델링하였고, 입력 전압 파형에 대한 출력 전류 파형을 구함으로써 실제 얻어지는 경사자계파형을 유도하였다. 모델링에서 사용한 R-L-C 값은 재구성영상의 화질로부터 얻을 수 있는 방법을 제시하였다. 결과 : 1.5 Tesla MRI 시스템에서 경사자계 시스템의 입력 전압 파형에 대하여 실제 얻어지는 경사자계 파형을 추정할 수 있었다. 경사자계파형을 적분함으로써 얻어진 나선 궤적을 재구성에 적용한 결과 재구성 영상의 균일도가 개선되었고, edge 부근에서 overshoot 가 줄어들었으며, 해상도가 향상된 영상을 얻을 수 있었다. 결론 : R-L-C 회로 모델을 이용하여 경사자계시스템을 성공적으로 모델링할 수 있었고, 입력 전압 파형에 대하여 실제 얻어지는 경사자계(전류) 파형을 추정할 수 있었다. 이로부터 얻은 kspace 나선 궤적을 이용하여 월등히 개선된 재구성영상을 얻을 수 있었다.

• 대한자기공명의과학회:학술대회논문집
• /
• 대한자기공명의과학회.한국자기공명학회 2005년도 공동학술대회
• /
• pp.68-68
• /
• 2005

• 한국의학물리학회지:의학물리
• /
• 제15권3호
• /
• pp.121-127
• /
• 2004

본 연구에서는 수치해석을 이용하여 강자기장이 인가된 물팬텀 속에서 고에너지 전자의 경로를 근사적으로 계산하였다. 이를 위하여 자기장에서 전자의 방향변화에 관한 방정식을 세우고 오일러(Euler) 방법을 적용하여 전산코드로 구현하였다. 전산코드를 이용하여 입사전자와 수직 및 수평방향의 자기장이 인가된 물팬텀에 대하여 3, 5, 10, 15 MeV 전자의 궤적을 계산하였다. 본 결과는 전자의 다중산란이 고려되지 않아 실제 궤적과 차이가 있으나, 결과로부터 외부 자기장에 의한 물팬텀 속 선량분포의 변화를 설명할 수 있다.

• 대한기계학회논문집B
• /
• 제24권3호
• /
• pp.477-484
• /
• 2000

Microcontamination caused by particle deposition on the head disk interface threatens the reliability of hard disk drive. Design of slider rail to control contamination becomes an important issue in magnetic recording. In this paper, how particles adhere to the slider and the disk is examined. To investigate accumulation mechanism of the particles, trajectory of the particles in a slider/disk interface is simulated with considering various forces including drag force, gravitational force, Saffman lift force, and electrostatic force. It is found that the charged particles can easily adhere to the slider or disk surface, if an electric field exists between the slider and the disk. It is supposed that the vertical motion of the particles should be related with not only Saffman force but also electrostatic force.

• 한국정밀공학회지
• /
• 제22권7호
• /
• pp.102-111
• /
• 2005

In this paper, we address a position control for a parallel stage, which is levitated and driven by electric magnetic force. This consists of a levitating object (called platen) with 4 permanent magnetic linear synchronous motors in parallel. Each motor generates vertical force for suspension against gravity and propulsion force horizontally as well. This stage can generate six degrees of freedom motion by the vertical and horizontal force. A dynamic equation of the stage system is derived based on Newton-Euler method and it's special Jacobian matrix describing a relation between the limited velocity and Cartesian velocity is done. There are proposed two control methods for positioning which are Cartesian space controller and Actuator space controller. The control performance of the Cartesian space controller is better than the Actuator space controller in task space trajectory while the Actuator space controller is simpler than the Cartesian space controller in controller realization.