• 한국정보통신학회논문지
• /
• 제12권8호
• /
• pp.1473-1480
• /
• 2008

비스무스는 융점이 낮아 취급이 용이하여 반자성체로서 전자기 차폐에 어떤 영향이 있는지 실험하기 쉽다. 그러나 실제 실험 재료를 원통으로 제작하여 측정된 경우를 찾아 볼 수 없다. 순수 비스무스는 반자성체로서 전자기 차폐에 어떤 영향이 있는가를 알기 위해서 비스무스를 다른 재료와 비교하기 위해서 원통으로 제조하였고 구리, 알루미늄, 철, 스텐레스 스틸도 원통을 만들어 정전차폐와 자기차폐를 저주파대에서 주파수 별로 측정하여 비교하였다. 그 결과 도표와 같이 구리와 비스무스 이중차폐가정전기에서는 제일 좋은 수치가 나왔다. 자기차폐에서는 철은 역시 가장 좋은 수치가 나왔고 비스무스는 별영향이 없이 나왔다.

• 한국군사과학기술학회지
• /
• 제21권4호
• /
• pp.456-463
• /
• 2018

With the development of weapon systems by mounting various sensors, it makes important to analyze the precise functioning of sensor to external environment. In the case of small arms with magnetic sensor, the malfunction of small arms might be caused by strong external magnetic fields. In this study, the effects of magnetic sensor on external magnetic fields were analyzed, and optimal magnetic shield and shield structure were designed through M&S. In addition, the magnetic-shielding effectiveness of magnetic sensor in small arms was verified with commercial shielding materials. As a result, it was demonstrated that the Fe-Cu-Si-Nd-B with the structure of multi-layer metallic shields was shown the magnetic-shielding effectiveness of 83 % for an external permanent magnet and 19 % for an alternating magnetic field of 180 dBpT at 60 Hz, respectively.

• 전력전자학회논문지
• /
• 제16권6호
• /
• pp.542-553
• /
• 2011

본 논문에서 방전 또는 스파크로 인한 전기화재, 폭발사고 및 감전 사고의 위험 없이 고주파 고전력을 안전하게 전달할 수 있는 새로운 형태의 실용적인 자기케이블을 처음으로 제안하였다. 또한, 케이블 사이에서 발생하는 누설자속에 대한 자기저항을 주변효과(fringe effect)까지 고려하여 정량적으로 해석하였다. 자기케이블에 상쇄코일, 상쇄금속판, 상쇄금속관과 같은 상쇄실드 적용함으로써 자기케이블 사이의 누설자속을 급격히 줄여 콤팩트한 자기케이블을 구현하였고, 장거리 전력전송을 가능하게 하였다. 입력전류 $10A_{rms}$(20kHz)에서 상쇄금속관이 적용된 1.5m길이, 5cm의 케이블 사이의 간격을 갖는 자기케이블로 353.8W의 전력을 68%효율로 전달하였다. 이는 상쇄금속관을 적용하지 않았을 때에 비해 출력전력은 약 25배, 효율은 약 7배 높은 수치다. 본 논문에서는 제안된 자기케이블의 성능 특성을 실험과 자장 시뮬레이션을 통해 분석 및 검증하고 비교하였으며, 기대했던 우수한 성능을 실제로 확인하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2002년도 동계연구발표회 논문개요집
• /
• pp.14-15
• /
• 2002

Iron nitride alloy films prepared in the form of laminated ${(Fe_{97}Al_3)}_{85}N_{15}/Al_2O_3$ multilayers (Ml's) due to excellent soft magnetic properties and high saturation magnetization [1, 2] are very promising materials for poles and shields in ultra high density thin film heads. The present work concerns the ferromagnetic (FM) coupling effect as a function of the thickness of $Al_2O_3$ spacers by analysis of the magnetic domain structure.

• 조명전기설비학회논문지
• /
• 제27권10호
• /
• pp.30-40
• /
• 2013

In this study the method based on flux linkage in cell was introduced in calculation of eddy currents by cell method. According to this method eddy current distribution and the loss can be evaluated and since the shielding effectiveness by flux cancelation of eddy current can be analyzed, this method is applicable to design of conductive shield. And also the formula of shielding factor were so deduced as to be applicable to finite-width infinite-length shielding sheets and infinite-length underground cable shield. These formula are adaptable to magnetic materials as well as conductive materials. As the results of calculation in model shields are follows. In case of finite-width infinite-length shielding sheet, shielding effectiveness increases with increasing of conductivity. In case of infinite-length underground cable shield, the effectiveness become higher with increasing of permeability. Especially the effectiveness is very high in materials with both high conductivity and permeability in underground cable shield.

• 대한전기학회논문지
• /
• 제40권1호
• /
• pp.24-30
• /
• 1991

This paper deals with the analysis of the transient characteristics of a superconducting a.c. generator(SCG) using Finite Element Method. Since the magnetic field induced by the field current and the armature currents are not sinusoidally distributed in a generator, the conventional equivalent circuit method, in general, uses the fundamental component only and is done in frequency domain. But the finite element analysis makes it possible to analyze the transient magnetic field distribution and the electrical characteristics of the double shields of SCG in time domain.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2002년도 International Meeting on Information Display
• /
• pp.1072-1073
• /
• 2002

We report using thin steel strip (0,1mm) for manufacturing Inner Magnetic Shield of CRT. Here we report that the reducing of steel strip thickness from 0,15mm to 0,1mm is possible as for one-piece IMS and for two-piece IMS without any reflection on quality of CRT. Also we report about advantages, which the producer of CRT could reach using steel with lowed carbon content up to 0,0005% by mass.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 1998년도 추계연구발표회 논문개요집
• /
• pp.82-83
• /
• 1998

• 대한전기학회논문지
• /
• 제40권6호
• /
• pp.562-566
• /
• 1991

Many research and development activities have found that Superconducting Generators (SCG) have advantages such as high efficiency, light weight, small size, large unit size and good steady-state stability over conventional ones. However the transient stability of SCG is comparable to that of conventional ones. One way to improve the transient stability of SCG is to apply quick-response excitation system to the SCG. For this purpose, an SCG with an electrothermal shield of short electric time constants should be developed. In this paper, a new electrothermal shield, called slitted electrothermal shield(SES), is proposed. The SES can easily transmit radiated heat into the ends of the shield as in the conventional electrothermal shields(CES) and can easily pass magnetic flux produced by armature and field windings. By finite element analysis and experimental test, the slitting effects of SES on magnetic shielding are compared. Good agreement is obtained between simulated and test results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 추계학술대회 논문집 학회본부
• /
• pp.49-52
• /
• 1990

In this paper, we proposed a new electrothermal shield model with slits for the purpose of applying to the Superconducting Generator with Quick-Response Excitation. Via experimental and finite element analysis, we compared the magnetic shielding effects of the proposed electrothermal shield model with the conventional one. It is considered that he proposed models meet the needs for the electrothermal shields of the Superconducting Generator with Quick-Response Excitation.