통합 검색 | Korea Science

조태식;김지식
- 한국전기전자재료학회:학술대회논문집
- /
- 한국전기전자재료학회 2003년도 춘계학술대회 논문집 초전도 자성체 연구회
- /
- pp.88-91
- /
- 2003
The magnetic porcelain materials were studied by using the porcelain materials added Sr-ferrite powders before forming and firing process. For the high magnetic property, the Sr-ferrite magnetic powders with the grain size of 1 ${\mu}m$ were agglomerated the powder size of about 1 mm. The magnetic porcelain with 30 wt% of Sr-ferrite powders indicated the magnetic characteristics such as the remanent flux density of 240 G and the intrinsic coercivity of 3910 Oe, at the firing conditions of $1250^{\circ}C$/1hr in air.
PDF

김효섭;이정구;이창규;구자명;홍순직
- 한국재료학회지
- /
- 제18권8호
- /
- pp.411-416
- /
- 2008
In this research, fine-structure TiO2 bulks were fabricated in a combined application of magnetic pulsed compaction (MPC) and subsequent sintering and their densification behavior was investigated. The obtained density of $TiO_2$ bulk prepared via the combined processes increased as the MPC pressure increased from 0.3 to 0.7 GPa. Relatively higher density (88%) in the MPCed specimen at 0.7 GPa was attributed to the decrease of the inter-particle distance of the pre-compacted component. High pressure and rapid compaction using magnetic pulsed compaction reduced the shrinkage rate (about 10% in this case) of the sintered bulks compared to general processing (about 20%). The mixing conditions of PVA, water, and $TiO_2$ nano powder for the compaction of $TiO_2$ nano powder did not affect the density and shrinkage of the sintered bulks due to the high pressure of the MPC.
https://doi.org/10.3740/MRSK.2008.18.8.411 인용 PDF KSCI

김주범;노태환
- 대한금속재료학회지
- /
- 제47권12호
- /
- pp.866-872
- /
- 2009
The effects of magnetic powder thickness on electromagnetic wave absorption characteristics in Fe-6.5Si-0.9Cr (wt%) alloy flakes/polymer composite sheets available for quasi-microwave band have been investigated. The atomized FeSiCr powders were milled by using attritor for 12, 24, and 36 h, powder thickness changed from $40{\mu}m$ to $3{\mu}m$ upon 36 h milling. The composite sheet, including thinned magnetic flakes, exhibited higher power loss in the GHz frequency range as compared with the sheets having thick flakes. Moreover, both the complex permeability and the loss factor increased with the decrease in thickness of the alloy flakes. Therefore, the enhanced power loss property of the sheets containing thin alloy flakes was attributed to the flakes of high complex permeability, especially their imaginary part. Additionally, the complex permittivity was also increased with the reduction of flake thickness, and this behavior was considered to be helpful for improvement of the electromagnetic wave absorption characteristics in the composite sheets, including thin alloy flakes.
KSCI

Miyahara, Masahisa;Tanaka, Yoshihiro;Igarashi, Kazunori;Morimoto, Koichiro
- 한국분말야금학회:학술대회논문집
- /
- 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
- /
- pp.1173-1174
- /
- 2006
Improvement of the strength is one of the most important subjects on soft magnetic composite (SMC) to increase the applica ble items. In this study, lubricants for inner lubricating SMC, which can be produced in lower cost than die wall-lubricatin g SMC, varied to investigate their effect on the strength. The newly developed SMC with self-lubricating resin shows high st rength equivalent to that of SMC obtained by die wall lubrication.
PDF