• International Journal of Precision Engineering and Manufacturing
• /
• 제8권2호
• /
• pp.85-89
• /
• 2007

Linear ball guideways have been used recently in precision or ultra-precision positioning devices. However, when the inner balls begin to roll or the moving direction reverses, these guideways are subject to rolling friction or nonlinear spring behavior. An ultra-precision device with a linear motor, referred to as a 'tunnel actuator' (TA), has been constructed to measure these phenomena. The application of a TA is beneficial for two reasons: it mostly cancels the attractive magnetic force between the stator and mover (armature), and its magnetic flux leakage is very low. The influence of the nonlinear spring behavior in ball guideways was investigated in this study using the pure driving force from a TA. The equilibrium between the driving force from the TA and the nonlinear spring force provided great accuracy for a positioning stage using a linear ball guideway.

• 한국통신학회논문지
• /
• 제38C권1호
• /
• pp.131-140
• /
• 2013

기존의 전파에 의존한 실내 위치측위 시스템의 한계점 발생으로 실내환경에서 정확도 향상을 위한 새로운 방법의 도입이 필요한 시점이다. 최근 생태계 모방 기술이 미래의 핵심기술이 되었고, 이에 따라 귀소본능을 가진 동물들이 지구자기장을 탐색하여 생체자석으로 위치친지에 사용하는 점을 적용한 정확한 위치 측위 방법을 연구하였다. 실내 위치측위를 위한 새로운 자원인 지구자기장의 적용 가능성을 확인하기 위해 건물구조, 구성재료를 구분하고 실제 자기장센서를 탑재할 수 있는 구조물과 데이터수집 모듈을 설계한 뒤, Fingerprint 기법의 위치측위 시스템을 구성하여 위치측위 자원으로서의 지구자기장의 적용 가능성을 연구하였다. 위치측위 시스템 성능 평가에서 기존의 무선랜이 설치된 건물에서는 지구자기장 세기 기반의 위치측위 시스템이 무선랜 기반 위치측위 시스템과 유사하거나 약 20% 성능이 높이 나타났다. 이와같이 실내 위치측위를 위한 인프라 설치가 되어 있지 않는 환경에서는 지구자기장이라는 고유의 지구자원으로 실내 위치측위가 가능하다.

• Journal of Power Electronics
• /
• 제6권3호
• /
• pp.264-270
• /
• 2006

Magnetic levitation transfer systems are useful for transfer tools in clean rooms and positioning control systems with high precision because of frictionless characteristics. In this paper, the new method is proposed which is a sensorless position. At first, the magnetic levitation is performed by state feedback control with a disturbance observer for each of six axes of the movement of a levitated vehicle. The position of the vehicle is then estimated as the disturbance term of a disturbance observer for a pitch angle which is one of the control axes for the magnetic levitation. In addition, the positioning force is generated by the pitch angle control which gives a tilt to the levitated vehicle so that it generates the horizontal component of force.

• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.107-112
• /
• 2016

Most of the indoor positioning algorithms based on magnetic data mainly focus on reducing the accumulated error of the odometry data, such as signals produced by the inertial sensors. However, in most cases such as positioning by using smartphones in the indoor environment, those approaches seem unfeasible due to the absence of the inertial sensors. Thus, in this paper, we try to study a positioning algorithm exclusively based on the magnetic data. We refer to some thinking from the steps of Particle Filter and conduct an experiment to verify the application of the new algorithm. Besides, we use the variance of the result of the previous step to decrease the area to be matched in the next step, intending to improve the accuracy of the results. The result of the experiment shows that the new algorithm has a high probability to match with accuracy less than 2 meters in a 24 meters by 2.6 meters corridor.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.150-154
• /
• 2017

A novel high precision spatial positioning method utilizing the electromagnetic momentum, i.e., Electromagnetic Momentum Positioning (EMP), is proposed in this paper. By measuring the momentum of the electromagnetic field around the small current loop, the relative position between the sensor and the current loop is calculated. This method is particularly suitable for the application of close-range and high-precision positioning, e.g., data gloves and medical devices in personal healthcare, etc. The simulation results show that EMP method can give a high accuracy with the positioning error less than 1 mm, which is better than the traditional magnetic positioning devices with the error greater than 1 cm. This method lays the foundation for the application of data gloves to meet the accurate positioning requirement, such as the high precision interaction in Virtual Reality (VR), Augmented Reality (AR) and personal wearable devices network.

• 제어로봇시스템학회논문지
• /
• 제19권1호
• /
• pp.10-14
• /
• 2013

High precision machining technology has become one of the important parts in the development of a precision machine. Such a machine requires high precision positioning as well as high speed on a large workspace. For machining systems having a high precision positioning with a long stroke, it is necessary to examine the repeatability of reference position decision. Though ball-screw driven linear stages equipped linear scale have high precision feed drivers and a long stroke, they have some limitations for reference position decision if they have not equipped the accurate home sensor. This study is performed to experimentally examine the repeatability for home position decision of a magnetic sensor as a home switch of ball-screw driven linear stage by using capacitance probe.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.313-317
• /
• 2005

Precision motor dynamometer is requiring for nano positioning control performance recently. Particularly, linear motor is using rapidly and the dynamometer needs is increasing. In this study, a precision control dynamometer is designed using MR (Magnetic Rheological) damper. The ultra precision motor system including the driver and controller is tested using the MR damper dynamometer. This dynamometer is able to measure torque for rotary motor or traction force with linear positioning accuracy for linear motor system.

• 한국정밀공학회지
• /
• 제24권8호통권197호
• /
• pp.89-96
• /
• 2007

In this paper, a new air bearing stage with magnetic preload and a linear motor has been developed for the small precision machine systems. The new air bearing stage is unique in the sense that permanent magnets attached bottom of the iron core of table are used not only for preloading air bearings in vertical direction but also for generating thrust force by current of the coil at base. The characteristics of air bearings using porous pads were analyzed with numerical method, and the magnetic circuit model was derived for linear motor for calculating required preload force and thrust force. A prototype of single axis miniature stage with size of $120(W){\times}120(L){\times}50(H)\;mm^3$ was designed and fabricated and examined its performances, vertical stiffness, load capacity, thrust force and positioning resolution.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.466-469
• /
• 1995

This paper presents a design and performance of the 6 D.O.F linear motion table with a magnetic bearing suspension. The linear positioning of the table with a 150mm stroke is driven by a brushless DC Linear motor and the other attitudes of the stage are controlled by the analog PD controller with magnetic bearing actuators. Each magnetic bearing unit which consists of 3 electromagnets, 3 capacitance probes and 3 backup bearings affords controlled forces by detecting the air gap between the probes and guideways. An integral type capacitance probe amplifier is equipped on the upper plate of the table so that the probe line to the probe amplifier can be shorter therefore the problems due to the stray capacitance and noise can be reduced. Form the pitch-yaw errormeasured by the autocollimator, the vertical and horizont straightness errors of the table are derived that they are maintained below 1.mu. m over 100mm stroke. The positioning accuracy of the linear motion is maintained below 2 .mu. m and the repeatability error is below 1 .mu. m

• 한국차세대컴퓨팅학회논문지
• /
• 제15권3호
• /
• pp.25-30
• /
• 2019

지자기 벡터는 센서가 바라보고 있는 방향에 따라 그 값이 달라지는 특성이 있다. 본 논문에서는 그런 문제를 최소화하여 지자기 기반 실내 위치 추정에 사용될 수 있도록 지자기 벡터 보정법을 제안한다. 지자기 기반 실내 위치 추정에서 사용되는 핑거프린팅 기법은 자기장 지도와 현재 위치에서의 자기장 값을 매칭하여 위치를 추정해낸다. 이때, 자기장 센서는 사용자의 이동 방향에 따라 읽어 들이는 자기장 벡터 값이 달라지기 때문에 위치 추정 정확도가 낮아진다. 이를 해결하기 위해 많은 연구들은 자기장 벡터 크기를 사용하지만, 이는 지문의 고유성을 감소시킨다. 따라서 본 논문에서는 지문의 고유성을 유지할 수 있는 자기장 벡터를 그대로 사용하되, 벡터 크기처럼 사용자의 이동방향에 영향을 받지 않도록 벡터 값을 보정하는 방법을 제안한다. 임의의 방향으로 걸어본 결과, 본 연구에서 제안된 보정법을 사용하면 자기장 지도와의 매칭 정확도가 높아지는 것을 확인하였다.