• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.461-465
• /
• 2011

Traditional magnetostrictive/piezoelectric laminate composites are generally in the regular geometries such as rectangles or disks. To explore properties of the irregular geometry magnetostrictive/piezoelectric transducer in the fundamental resonant frequency, a step dumb-bell shaped Magnetoelectric (ME) transducer is presented in this study. Both analytical and experimental investigations are carried out for the dumb-bell shaped transducer in the fundamental frequency. Comparing with the traditional rectangular transducer, the theory shows the resonant frequency of dumb-bell shaped transducer is reduced 31%, and the experiment gives the result of that is 37% which is independent of dc magnetic fields. The ratio of magnetoelectric voltage coefficient (MEVC) between the dumb-bell shaped and rectangular shaped transducers in theory is 66% comparing with that of in experiment is varying from 140% to 33% when the dc field is increased from 0 Oe to 118 Oe.

• Journal of the Korean Ceramic Society
• /
• v.39 no.9
• /
• pp.813-817
• /
• 2002

Magnetoelectric(ME) laminate composites of $Pb(Mg_{1/3}Nb_{2/3})O_3-PbTiO_3 (PMN-PT)$ and Terfenol-D were prepared by sandwiching single crystals of PMN-PT between Terfenol-D disks. The magnetoelectric voltage coefficient (dE/dH) of the composite was determined to be 10.30 V/cm${\cdot}$Oe, at 1 kHz and under a dc magnetic bias of 0.4 T. The value of dE/dH is ∼80 times higher than either that of naturally occurring magnetoelectrics or artificially-grown magnetoelectric composites. This superior magnetoelectric voltage coefficient is attributed to the high piezoelectric voltage constant as well as the high elastic compliance of PMN-PT single crystal and the large magnetostrictive response of Terfenol-D.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.484-487
• /
• 2005

In order to get the surface characteristics of the HDI of HDD, the surface damage mechanisms must be totally understood. Particle contamination in hard disk drives is a big concern in today's magnetic recording industry since they are major sources of reliability problems. Namely upon contact with the slider or a contaminant particle, the disk may be scratched or the particles may be embedded into the disk surface. In this work, comparison of scratches was made between those found on actual hard disks and those created using a scratch tester. It was found that ramp loading method is an effective way to make similar scratches as the actual ones. From the ramp loading condition, the relationship between the pressure and the scratch track width could be identified.

• The korean journal of orthodontics
• /
• v.35 no.5 s.112
• /
• pp.398-407
• /
• 2005

The present study was conducted to examine the morphometrics and function of the disk on both sides among patients with facial asymmetry (FA) and to elucidate plausible correlations between internal derangement (ID) and FA. The sample was composed of 10 males and 27 females with FA. The disk status of all subjects was evaluated by bilateral high resolution magnetic resonance scans in the sagittal (closed and open) and coronal (closed) planes. Five types of disk displacement were identified accordingly. The disk function was diagnosed as normal disk function, disk displacement with reduction, and disk displacement without reduction. The disk shape on sagittal MRI in closed position was classified as bi-concave, biplanar, funnel/hemiconvex, and deformed. The disk position, translation and rotation were also measured. The difference between the shifted side and non-shifted side was analyzed by statistical analysis. Approximately $70\%$ of the patients in the present study showed unilateral or bilateral ID. It was found that anterior disk displacements (ADD), especially rotational ADD, occurred more frequently in the shifted side, while normal disk position was observed mainly in the non-shifted side (p<0.01). The disk of the shifted side showed significantly deformed configuration and inferior-anterior disk position. However, the disk of the non-deviated side showed hyper-mobility during jaw opening movement. These results demonstrate that in FA patients, the disks status of the shifted side is different from that of the non-shifted side, a phenomenon that could be correlated to facial asymmetry.

• The KIPS Transactions:PartA
• /
• v.14A no.1 s.105
• /
• pp.39-46
• /
• 2007

Recently flash memory is widely accepted as a storage devise of embedded systems for portability and performance reasons. Flash memory has many distinguishing features compared to legacy magnetic disks. Especially, a file system for flash memory usually assumes the form of log-structured file system and it employs garbage collector accordingly. Since the garbage collector can greatly affect the performance of file system, it should be designed carefully considering flash memory features. In this paper, we suggest a new garbage collector for existing JFFS2 (Journaling Flash File System II) file system. By extensive performance evaluation, we show that the proposed garbage collector achieves improved performance in terms of flash memory consumption rate, increased flash memory life time, and improved wear-leveling.

• Journal of KIISE:Computer Systems and Theory
• /
• v.32 no.4
• /
• pp.177-185
• /
• 2005

NAND-type flash memory is becoming increasingly popular as a large data storage for mobile computing devices. Since flash memory is an order of magnitude more expensive than magnetic disks, data compression can be effectively used in managing flash memory based storage systems. However, compressed data management in NAND-type flash memory is challenging because it supports only page-based I/Os. For example, when the size of compressed data is smaller than the page size. internal fragmentation occurs and this degrades the effectiveness of compression seriously. In this paper, we present an efficient flash compression layer (FCL) for NAND-type flash memory which stores several small compressed pages into one physical page by using a write buffer Based on prototype implementation and simulation studies, we show that the proposed scheme offers the storage of flash memory more than $140\%$ of its original size and expands the write bandwidth significantly.

• The KIPS Transactions:PartD
• /
• v.15D no.5
• /
• pp.589-598
• /
• 2008

Recently, Mobile Computing Devices are used generally. And Information which is processed by Mobile computing devices is increasing. Because information is digitalizing. So Mobile computing Devices demand an Embedded DBMS for efficient management of information. Moreover Mobile computing Devices demand an efficient storage management in NAND-type flash memory because the NAND-type flash memory is using generally in Mobile computing devices and the NAND-type flash memory is more expensive than the magnetic disks. So that in this paper, we present an efficient Compressed Data Management System for the embedded DBMS that is used in flash memory. This proposed system improve the space utilization and extend a lifetime of a flash memory because it decreases the size of data.

• Journal of the Korea Society of Computer and Information
• /
• v.28 no.8
• /
• pp.1-10
• /
• 2023

Recently, NAND flash memories have replaced magnetic disks due to non-volatility, high capacity and high resistance, in various computer systems but it has disadvantages which are the limited lifespan and imbalanced operation latency. Therefore, many page replacement policies have been studied to overcome the disadvantages of NAND flash memories. Although it is clear that these policies reflect execution characteristics of various environments and applications, researches on the foundation-policy decision for disk buffer management are insufficient. Thus, in this paper, we propose a foundation-policy recommendation model, called FRM for effectively utilizing NAND flash memories. FRM proposes a suitable page replacement policy by classifying and analyzing characteristics of workloads through machine learning. As an implementation case, we introduce FRM with a disk buffer management policy and in experiment results, prediction accuracy and weighted average of FRM shows 92.85% and 88.97%, by training dataset and validation dataset for foundation disk buffer management policy, respectively.

• Journal of Korea Multimedia Society
• /
• v.4 no.1
• /
• pp.13-28
• /
• 2001

In a VOD(Vide-On-Demand) system, video data are generally stored in magnetic disk array. In order to provide real-time requirement for data retrieval, video streams must be delivered continuously to the clients such that the delivery of continuous media can be guaranteed in a timely fashion. Compared to the increased performance of processors and networks, the performance of magnetic disk systems have improved only modestly. In order to improve the performance of storage system, disk array system is proposed and used. The array system improves I/O performance by placing disks in parallel and retrieving data concurrently. In this paper, two approaches are considered in order to access the video data in a VOD system, which are CTL(Constant Time Length) and CDL(Constant Data Length) access policies. Disk scheduling policies are also classified into the two categories and compared in terms of the maximum allowable video streams with different degrees of disk array synchronization, under the mixed environments in which both data access policy and disk scheduling policy are considered. Among the compared scheduling policies, LOOK was shown to have the best performance. In terms of degree of disk synchronization, more gain was achieved with large degree of synchronization. In comparisons of performance of CTL and CDL, CTL was proved to have a little superior performance in terms of number of maximum allowable streams.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.5
• /
• pp.77-83
• /
• 2020

4WD technology is being actively applied to passenger cars. Therefore, dry multi-plate clutches are used for transfer cases. On the other hand, dry clutches have problems related to large vibrations and poor ride quality. To solve this problem, this paper proposes a multi-plate clutch with an MR fluid. When fastening the multi-plate clutch in the transfer case, the proposed MR clutch was applied to reduce the shock and friction, which is a key component in a four-wheel-drive system. MR multi-plate clutch has a fluid coupling mode and a compression mode. A torque model equation was derived for the optimal design. The analysis was performed using Ansys Maxwell to optimize the design parameters of the multi-plate clutch. Electromagnetic field analysis confirmed the strength of the magnetic field when the number of disks and plates were changed, and the maximum strength of the magnetic field was 0.45 Tesla. By applying this to the torque equation, the spacing between the plates was 2 mm, and the inner and outer diameters of the plates were selected to be 45 mm and 55 mm, respectively. Overall, this paper proposes an optimal design technique to maximize the performance of an MR multi-plate clutch.