• 제목/요약/키워드: Magnetic device

검색결과 934건 처리시간 0.027초

페라이트 소재변수에 따른 아이솔레이터 특성 연구 (Characteristics of Isolator for material parameter)

  • 전동석;이홍열;김동영;이상석
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 하계학술대회 논문집 Vol.4 No.1
    • /
    • pp.119-122
    • /
    • 2003
  • This paper describes characteristics for insertion losses of Isolator have an effect on material parameter. One purpose of the paper is to present insertion loss on this resonator for magnetic loss, dielectric loss, magnetic field and saturation magnetization. Another is to study the effect of propeller resonator on response characteristics. In this paper, the analysis and measurement of the response characteristics were carried out for the isolator prototype. The measurement results agreed on the simulation results and acquire insertion loss $0.18\;{\sim}\;0.24dB$, return loss 27dB, isolation 27dB and bandwidth 500MHz on this condition saturation magnetization 550G, dielectric loss 0.0004, magnetic loss 20 and dielectric constant 14.

  • PDF

영구자석을 이용한 콘크리트 궤도상의 쇠가루 포집장치 특성 분석 연구 (Analysis of Iron-filings Trapping Characteristics on Concrete Slab Track using Permanent Magnet)

  • 박찬배;이주
    • 한국철도학회논문집
    • /
    • 제14권4호
    • /
    • pp.348-353
    • /
    • 2011
  • 레일을 궤도회로로 이용하는 신호 설비의 경우, 레일 주변에 쌓이는 쇠가루는 궤도회로 상에 이상 신호유발의 원인이 되기도 한다. 차량의 곡선 주행 구간에서는 레일과 차륜의 마찰이 심하여 차륜의 마모에 의한 쇠가루가 발생하게 되고, 이렇게 발생한 레일 상의 쇠가루로 인해 이상 신호가 종종 발생하기 때문에 지하철 운영사의 쇠가루 제거를 위한 방안 마련이 시급한 실정이다. 본 연구에서는 콘크리트 궤도 상 레일 주변의 쇠가루를 포집하기 위한 영구자석 적용 마그넷 포집장치를 소개하였다. 또한 기본 설계 및 수치 해석적 기법을 이용하여 마그넷 포집장치의 다양한 특성 분석을 수행하였으며, 이를 통하여 콘크리트 궤도상의 쇠가루 포집을 위한 마그넷 포집장치의 실제 상용노선 차량에의 적용 가능성을 검토하였다.

영구자석의 형상을 이용한 오버헤드 교반기용 임펠러 종류의 인식에 관한 연구 (A Study on the Discrimination of the Overhead Stirrer Impeller using the Dimensions of Permanent Magnets)

  • 이호철;김기대
    • 한국기계가공학회지
    • /
    • 제18권2호
    • /
    • pp.52-57
    • /
    • 2019
  • To develop a stirring device that can automatically measure the viscosity of a fluid, the impeller type of the device must be recognized without making contact. In this study, we propose a method to discriminate the type of impellers using the changes in the magnetic field. Permanent magnets are inserted into a hollow hole of the impellers, and the change of the magnetic field is measured by a hall sensor. All experimental results are compared with the FEM analysis results. The results show that with the increase in diameter and length of the magnet inserted into the impeller, the magnitude of the magnetic flux density increases. The magnetic field is more sensitive to the change in the magnet diameter than to the change in magnet length. In order to reduce the machining costs, however, it is advantageous to change the magnet length instead of the magnet diameter.

FePt 자기 양자점 터널링 소자의 전기적 특성과 자기적 특성 연구 (Electrical and Magnetic Properties of Tunneling Device with FePt Magnetic Quantum Dots)

  • 박상우;서주영;이동욱;김은규
    • 한국진공학회지
    • /
    • 제20권1호
    • /
    • pp.57-62
    • /
    • 2011
  • 열처리 방식을 통하여 형성된 FePt 나노 입자를 사용하는 자기 양자점 소자를 제작하고, 전기적 및 자기적 특성을 연구하였다. FePt 자기 양자점 터널링 소자는 p 형 Si 기판 상부에 약 20 nm의 $SiO_2$ 터널 절연막을 형성하고 FePt 박막을 3 nm 두께로 증착한 후에 열처리 방식을 이용하여 8~15 nm 크기의 양자점을 갖는 구조이다. 터널링 소자의 전류-전압 특성을 자기장과 온도 변화에 따라 관찰하였고 특히, 저온에서 비선형적인 전류-전압 곡선을 확인하였으며 이러한 단전자 수송현상을 전자의 hopping 모델과 양자점의 터널링 현상을 이용하여 설명하였다. FePt 양자점 터널링 소자는 20 K에서 터널링 현상을 보였으며, 양단에 가해준 전압과 관계없이 외부 자기장이 증가할수록 음의 자기저항이 커지는 현상을 관찰하였고, 9,000 G에서 약 26.2 %의 자기저항 비를 확인하였다.

자기장 단결정 성장장치의 개발과 적용 (Development and application of the magnetic field device for single crystal growth)

  • 김신애;조상진;엘레나 마가이;류선영
    • 한국결정성장학회지
    • /
    • 제23권1호
    • /
    • pp.1-7
    • /
    • 2013
  • 중성자회절을 이용하여 단백질 내의 수소원자 위치를 포함한 3차원 상세구조를 분석할 수 있으므로, 중성자 회절용 단백질 단결정을 성장시키기 위해 상용자석을 이용한 자기장 단결정 성장장치를 개발하였다. 이 장치를 이용하여 중성자 회절실험에 필요한 1 $mm^3$ 이상 부피의 lysozyme 단결정 시료를 성장시켰다. 자기장 영향 하에서 성장시킨 단결정은 자기장의 영향 없이 성장한 시료보다 평균 부피가 크고 결정도가 우수하였으며, X-선 측정 결과에서도 해상도가 높고 작은 mosaicity를 나타내었다.

NiFe/Cu/NiFe/IrMn 스핀밸브 박막소자의 자화 용이축에 따른 형상 자기이방성 (Shape Magnetic Anisotropy on Magnetic Easy Axis of NiFe/Cu/NiFe/IrMn Spin Valve Thin Film)

  • 최종구;곽태준;이상석;심정택
    • 한국자기학회지
    • /
    • 제20권2호
    • /
    • pp.35-40
    • /
    • 2010
  • NiFe/Cu/NiFe/IrMn 스핀밸브 박막소자에 대해 자화 용이축에 의존하는 형상 자기이방성을 조사하였다. Ta(5 nm)/NiFe(8 nm)/Cu(2.3 nm)/NiFe(4 nm)/IrMn(8 nm)/Ta(2.5 nm) 다층박막을 증착할 때 350 Oe의 자기장으로 인가한 자화 용이축을 폭 방향 또는 길이 방향으로 설정하여 $1\;{\mu}m\;{\times}\;18\;{\mu}m$의 소자를 제작하였다. 2단자 방법으로 소자의 자기저항 곡선으로부터 자장감응도를 측정하고 자화 용이축에 따른 형상 자기이방성을 비교하였다. 측정한 소자 길이 방향의 센싱전류와 고정층의 자화 용이축이 소자 폭방향 각도가 GMR-SV 소자를 바이오센서로 활용하는데 중요한 요인임을 확인하였다.