• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.349-362
• /
• 2016

The numerical solutions of unsteady hydromagnetic natural convection Couette flow of a viscous, incompressible and electrically conducting fluid between the two vertical parallel plates in the presence of thermal radiation, thermal diffusion and diffusion thermo are obtained here. The fundamental dimensionless governing coupled linear partial differential equations for impulsive movement and uniformly accelerated movement of the plate were solved by an efficient Finite Element Method. Computations were performed for a wide range of the governing flow parameters, viz., Thermal diffusion (Soret) and Diffusion thermo (Dufour) parameters, Magnetic field parameter, Prandtl number, Thermal radiation and Schmidt number. The effects of these flow parameters on the velocity (u), temperature (${\theta}$) and Concentration (${\phi}$) are shown graphically. Also the effects of these pertinent parameters on the skin-friction, the rate of heat and mass transfer are obtained and discussed numerically through tabular forms. These are in good agreement with earlier reported studies. Analysis indicates that the fluid velocity is an increasing function of Grashof numbers for heat and mass transfer, Soret and Dufour numbers whereas the Magnetic parameter, Thermal radiation parameter, Prandtl number and Schmidt number lead to reduction of the velocity profiles. Also, it is noticed that the rate of heat transfer coefficient and temperature profiles increase with decrease in the thermal radiation parameter and Prandtl number, whereas the reverse effect is observed with increase of Dufour number. Further, the concentration profiles increase with increase in the Soret number whereas reverse effect is seen by increasing the values of the Schmidt number.

• 전력전자학회논문지
• /
• 제4권5호
• /
• pp.433-441
• /
• 1999

본 논문에서는 기존 축전지를 대체하기 위한 초전도 플라이휠 에너지 저장시스템에 관해 연구 하였다. 전동/발전기, 베어링, 휠재료, 전력변환기등의 설계요소에 관해 기술하였으며 초고속의 회생 및 저장 모드에서 모터입력전류를 정현파로 제어하기 위한 전력변환기를 설계 제작하였다. 높은 보자력을 갖는 희토류 영구자석을 사용하여 계자를 구성하는 원통형 영구자석 동기전동기를 사용함으로써 고효율을 실현하고자 하였다. 기계적 베어링과 초전도 자기부상 베어링을 사용하는 시스템에 적용하여 운전하였으며 후자의 경우 약 10.000[rpm]에서 매우 안정된 회전 특성을 보였으며 전자의 경우 설계 특성을 만족하면서 7.000[rpm]에서 100[V]의 일정 직류전압으로 약 25초 동안 400[W]의 전력을 회생하였다.

• 전기학회논문지P
• /
• 제60권2호
• /
• pp.82-90
• /
• 2011

The small precision spindle motors in the high value-added products including the visible home appliances such as DLP projector require not only the energy conversion devices but also high efficiency, low vibration and sound operation. However, the spindle motors using the conventional ball bearing and sintered porous metal bearing have following problems, respectively: the vibration by the irregularity of balls and the short motor life cycle by the ball's abrasion and higher sound noises by dry contact between shaft and sleeve. In this paper, it is proposed that the spindle motor with a fluid dynamic bearing is suitable for the motor to drive the color wheel of the DLP(digital lightening processor) in the visible home appliances. The proposed spindle motor is composed of the fluid dynamic bearing with both the radial force and the thrust force. The fluid dynamic bearing is solved by the finite element analysis of the mechanical field with the Reynolds equations. The magnetic part of spindle motor, which is a type of Brushless DC Motor, is designed by the electro-magnetic field analysis coupled with the Maxwell equation. And the load capacity and the friction loss of fluid dynamic bearing are analyzed to bearing clearance variation by the fabrication error in designed motor. The design of the proposed motor is implemented by the load torque caused by the eccentricity and the unbalance of the fluid dynamic bearing when the motors are fabricated in error. The prototype of the motor with the fluid dynamic bearing is manufactured, and experiment results show the vibration, sound, and phase current at no load and color wheel load of the motors in comparison. The high performance characteristics with the low vibration, the low acoustic noise and the optimal mechanical structure are verified by the experimental results.

• 전자공학회논문지T
• /
• 제36T권4호
• /
• pp.38-46
• /
• 1999

본 논문에서는 조미동 구동기의 반복추종제어에 관하여 논의한다. 제안되는 시스템은 조동구동기로 선형 자기드라이브를, 미동구동기로 선형 압전구동기를 사용하여 구성된다. 특히, 선형 자기드라이브에 내재된 비선형 마찰과 선형 압전구동기의 이력현상이 먼저 모델링되고 되먹임선형화 루프가 이들을 추종제어에 사용한다. 주기적인 입력신호를 추종하는 경우 이를 더욱 확장하려 반복제어 알고리즘을 포함하도록 제어기를 설계한다. 즉, 반복제어기는 되먹임선형화가 적용된 PID 제어기에 설치된다. 실험결과에 의하면 정현파 입력을 추종하는 경우 PID 제어기에 되먹임선형화와 반복제어기를 함께 적용함으로써 추종성능을 크게 향상시킬 수 있는 것으로 나타났다.

• Journal of Magnetics
• /
• 제18권4호
• /
• pp.481-486
• /
• 2013

An electromagnetic launcher (EML) system accelerates and launches a projectile by converting electric energy into kinetic energy. There are two types of EML systems under development: the rail gun and the coil gun. A railgun comprises a pair of parallel conducting rails, along which a sliding armature is accelerated by the electromagnetic effects of a current that flows down one rail, into the armature and then back along the other rail, but the high mechanical friction between the projectile and the rail can damage the projectile. A coil gun launches the projectile by the attractive magnetic force of the electromagnetic coil. A higher projectile muzzle velocity needs multiple stages of electromagnetic coils, which makes the coil gun EML system longer. As a result, the installation cost of a coil gun EML system is very high due to the large installation site needed for the EML. We present a coil gun EML system that has a new structure and arrangement for multiple electromagnetic coils to reduce the length of the system. A mathematical model of the proposed coil gun EML system is developed in order to calculate the magnetic field and forces, and to simulate the muzzle velocity of a projectile by driving and switching the electric current into multiple stages of electromagnetic coils. Using the proposed design, the length of the coil gun EML system is shortened by 31% compared with a conventional coil gun system while satisfying a target projectile muzzle velocity of over 100 m/s.

• 한국자기학회지
• /
• 제8권5호
• /
• pp.255-260
• /
• 1998

두께 10$\mu\textrm{m}$ 이하의 코발트계 극박형 비정질합금의 진공중 용탕급냉방법에 의한 제조조건과 자기적 특성에 대해 연구되었다. 구리 냉각롤의 회전 선속도를 55 m/s로 하였을 때, 0.05 kgf/cm2 이하의 용탕분사압 조건에서 극박형 리본이 얻어졌다. 합금 두께는 용탕분사 가스압력의 감소에 비례하여 직선적으로 감소하였으며, 이와 동시에 폭의 감소도 함께 일어났다. 이는 극박형 합금을 만들기 위해 용탕분사압을 극단적으로 감소시키면 노즐구의 양단부에서 용융금속과 노즐 사이의 마찰효과가 크게 나타나 유효분사압이 현저히 감소하는 데에 기인하는 것으로 해석되었다. 저주파(1 kHz) 실효투자율은 대략 2차 함수의 관계로 리본 두께의 감소에 따라 저하되었다. 반면 보자력은 두께의 감소에 반비례하여 증가하였는데, 이들 현상은 거의 전적으로 표면효과의 증대에 의한 자벽이동의 억제에 그 원인이 있는 것으로 판단되었다. 그러나 고주파(1 MHz) 실효투자율은 두께의 감소에 따라 증가하였는바 이는 와전류 발생이 억제되어 자기장 방향으로의 자화회전이 보다 용이해지기 때문으로 생각되었으며, 결과적으로 극박화에 의해 MHz 대역에서 우수한 저손실 성질을 나타내는 자심 특성의 실현이 가능하였다.

• 한국소음진동공학회논문집
• /
• 제18권10호
• /
• pp.997-1005
• /
• 2008

Linear motor stage is a useful device in precision engineering field because of its simple power transmission mechanism and accurate positioning. Even though linear motor stage shows fine positioning accuracy along travel axis, geometric dependent errors which relay on machining and assembling accuracy should be addressed to increase total positioning performances. In this paper, we suggests a cost effective yaw error compensation servo-system which is mounted on platform of the stage and nullify travel position dependent yaw error. This paper also provides a method of designing a sliding mode control which is robust to existing friction disturbance and model uncertainties. The reachability condition of slinding mode control for the yaw error compensating servo-system has been established. From some experimental results by using an experimental set-up, the sliding mode control showed its effective in disturbance rejection and its performance was superior to conventional linear controls.

• 한국자기학회지
• /
• 제20권4호
• /
• pp.149-152
• /
• 2010

평판형 전자기 엑츄에이터는 이동코일과 가이드 사이의 마찰이 없기 때문에 초정밀 제품에 널리 사용된다. 전자기 엑츄에이터의 성능 검증에 가장 많이 사용되는 방법 중 한 가지는 유한요소해석 방법이다. 하지만 유한요소해석 방법은 해석 시간이 많이든다는 단점이 있다. 유한요소해석 방법의 대안으로 계산시간은 짧지만 높은 정확도의 해석 결과를 도출해 낼 수 있는 집중매개 변수모델 해석방법이 많이 사용되고 있다. 본 논문에서는 평판형 전자기 엑츄에이터의 집중매개변수 모델링을 생성하고 시뮬레이션을 통해 성능을 검증하고 그 결과를 유한요소해석 결과와 비교해 본다.

• 소성∙가공
• /
• 제29권1호
• /
• pp.27-36
• /
• 2020

The Goss texture component of {110}<001> is well known as one of the best texture components to improve the magnetic properties of electrical steel sheets. The small amount of the Goss texture component is obtained at the surface of the steel sheet by shear deformation due to friction between the steel sheet and the roll during conventional symmetric rolling. This study aims to identify a method to obtain high intensity of the Goss texture component not only at the surface but in the whole layer of the steel sheet by shear deformation of asymmetric rolling. Low carbon steel sheets, which have different initial texture, were asymmetrically rolled by about 50%, 70%, and 80%. The pole figures of the top, center, and bottom layers of the initial and asymmetrically rolled low carbon steel sheets were measured by an X-ray diffractometer. Based on the measured pole figures of these samples, the intensities of the main texture components were analyzed for the initial and asymmetrically rolled low carbon steel sheets. As a result, the initial low carbon steel sheet with the γ-fiber component showed a higher intensity of the Goss texture component in the whole layer than the steel sheet with other texture components after asymmetric rolling.

• Journal of Electrical Engineering and Technology
• /
• 제11권1호
• /
• pp.135-142
• /
• 2016

Generally, closed slots are adopted to reduce the water friction loss in both the stator and the rotor of water filling submersible motor due to the special environment of operation. One of the obvious differences between the traditional induction motors and water filling submersible motors is that the submersible motors only need relatively smaller starting torque. This paper aims to analyze the slot leakage reactance of water filling submersible motor during starting transient operation. An improved analytical method which considered the magnetic saturation of the slot bridge and the skin effect of rotor bars is proposed. The slot permeance factor which has a direct impact on the slot leakage reactance is calculated. Then finite element models with different stator slot types are constructed and search coils are introduced to measure the slot flux linkage. Moreover, the starting performances of the models with two typical stator slots are compared and the flux leakage characteristics are obtained. Finally, the results obtained by finite element method are very close to the results obtained by analytical method.