• 지구물리와물리탐사
• /
• 제9권1호
• /
• pp.121-128
• /
• 2006

헬리콥터를 이용한 항공자력탐사는 정해진 고도를 따라 지표면에 평행하게 이루어지지만, 고해상도 탐사에서는 특히 측정이 이루어지는 고도가 너무 변화하여 평탄면으로 간주할 수 없는 경우가 있다. 이 연구에서는 모서리 효과를 조절할 수 있도록 주변 자력원이 포함되는 등가원 방법을 이용하여 이러한 자료를 변환하는 방법을 개발하였고, 3차원적으로 무작위하게 분포하는 점의 자료를 직접적으로 모델화하였다. 이 문제는 일반적으로 under-determined 이지만 CG 법은 최소 norm 해를 찾을 수 있으며, 자력이상을 자력원과 연관시키는 조화함수를 선택할 자유가 있는데, 상향연속 함수 연산자가 선택되면 등가원 자체가 자력이상이 된다. 기본자기장의 방향으로의 자기 쌍극자분포를 자력원으로 선택하면, 자기 쌍극자의 방향을 수직으로 돌려줌으로써 쉽게 자극화 변환 이상을 유도할 수 있다.

• 대한화학회지
• /
• 제24권2호
• /
• pp.91-100
• /
• 1980

축방향대칭을 갖는 팔면체 $[Ti(III)A_3B_3]$형태 착물의 자기모멘트를 계산하는 식을 유도하여 distortion parameter$({\delta})$, 스핀-궤도 상호작용상수$({\zeta}')$ 및 orbital reduction factor의 실험치를 사용하여 이들 착물의 자기모멘트를 계산하였다. 축방향으로 일그러진 팔면체 $[Ti(III)A_3B_3]$형태 착물의 계산한 자기모멘트가 실험치와 비교적 일치하였다. 팔면체로부터 축방향 일그러짐이 커짐에 따라 그리고 orbital reduction factor가 감소함에 따라 계산한 자기모멘트의 값이 크게 감소하였다. 축방향대칭보다 낮은 리간드장으로 일그러진 팔면체착물의 자기모멘트를 계산하는 방법을 발전시켰으며 계산한 자기모멘트를 기초로 하여 일그러진 팔면체 $[Ti(III)A_3B_3]$형태 착물의 구조를 논의하였다.

• Journal of Magnetics
• /
• 제19권4호
• /
• pp.340-344
• /
• 2014

An effective process was employed for synthesizing anisotropic magnetic $SmCo_7$-type alloy flakes with high coercivity, which is highly desirable for many applications. The highest coercivity of 16.3 kOe corresponds to a typical flake thickness of 200 nm for the 3-h ball-milled sample. The anisotropy field was calculated by measuring the parallel and perpendicular directions to the easy magnetization direction of the powders. The anisotropy field decreased with the increase of the ball milling time, thus indicating that the decrease of coercivity was mainly caused by the reduction of the anisotropy field. Microstructure analysis indicated that the morphology, grain size, and anisotropy field of these samples have a great influence on the magnetic properties.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3506-3511
• /
• 2007

The energy harvesting using smart materials has been extensively investigated to supply electric power to wireless sensor systems. In this paper, the energy harvesting using eddy current was studied with the integrated magnetic cantilever beam system. If a large conductive metal plate moves through a magnetic field which intersects perpendicularly to the sheet, the magnetic field will induce small rings of current which will actually create internal magnetic fields opposing the change. This eddy current that was induced in the coiled conductive sheet from the mechanical vibration was converted to chemical energy by charging batteries. The experimental results show that the eddy current generated the electric power up to max 31.2mW. Additionally the vibration reduction of the mechanical cantilever beam was observed by the energy dissipation in the electro-magnetic coupled system. The present result shows that the vibration level of the first natural frequency was reduced up to 7.7dB

• 한국분말재료학회지
• /
• 제21권6호
• /
• pp.429-433
• /
• 2014

This study investigated the magnetic properties and frequency dispersion of complex permeability of Ni-Zn-Co ferrites used for magnetic shielding in near field communication (NFC) system. The sintered specimens of $(Ni_{0.7}Zn_{0.3})_{1-x}Co_xFe_2O_4$ composition were prepared by the conventional ceramic processing. The coercive force and saturation magnetization were measured by vibrating sample magnetometer. The complex permeability was measured by RF impedance analyzer in the range of 1 MHz~1.8 GHz. The coercive force increased and saturation magnetization decreased with increasing the Co substitution. The real and imaginary parts of complex permeability decreased and the resonance frequency increased with Co substitution, which was attributed to the increase in crystal anisotropy field and reduction in saturation magnetization. The effect of Co substitution could be found in reducing the magnetic loss to nearly zero at the operating frequency of NFC (13.56 MHz).

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.121-126
• /
• 2001

This paper presents the experimental study for the reduction of transmitted shock waves in smart structures incorporating MR insert. MR fluid is filled within the two aluminum layers and two piezoceramic disks are embedded on the host plate as a transmitter and a receiver of the shock wave. Pulse wave generated by the transmitter is transmitted to the receiver through the MR insert and the plate. By applying magnetic field to the MR insert, the amplitude of the transmitted shock wave is reduced remarkably. The attenuation performance is tested by changing the applied magnetic field on MR inserts in two ways: by changing angle of permanent rubber magnet from 90 to 5 with 5 decrements, by using electromagnet in which magnetic field is controllable. The propagating wave speed of MR insert is also investigated.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1632-1637
• /
• 2007

This paper analyses current densities induced inside human body of lineman for 765kV transmission line when he wears a protective cloth or not. Applying the boundary element method, we calculate current densities induced in organs inside a worker in case he was located at 15[cm], 30[cm], 50[cm], and 100[cm] far from a prefabricated jumper. As results of study, we find a maximum current density induced in all organs may be higher than $10[mA/m^2]$ if he does not wear protective clothes. We also know high permeability materials can lower current density more than high conductivity materials.

• 제어로봇시스템학회논문지
• /
• 제13권9호
• /
• pp.915-919
• /
• 2007

This paper proposed a transponder detection method to reduce recognition time in RFID system. It's also shown that conventional procedure of communication in the system could cause a waste of time when a reader recognizes a transponder. The reduction of recognition time can be obtained by developing a circuit to detect a transponder actively. Detecting a transponder is achieved by using the voltage variation of reader antenna voltage that happens when a transponder approaches to the vicinity of magnetic field formed by the reader. By adding a comparator to the antenna receiver of a reader, the reader can perceive approach or existence of a transponder. A reader for experiment is made using the MFRC500 by Phillips that supports ISO/IEC 14443 protocol. Comparing the proposed method with the conventional methods by experiment, there are 47.5ms reduction of recognition time maximally and 12ms in average.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1265-1271
• /
• 2010

Power cable of an AC arc welder can surround a body of worker at the moment of welding. Applying the boundary element method, we calculated current densities induced in organs inside a worker to study the magnetic field reduction characteristics of shielding wear materials. We knew shielding wear with high permeability materials lowers current density more than high conductivity materials. We also found current density was lowest when high permeability materials were inside high conductivity materials in double layer shielding wear.

• 한국자동차공학회논문집
• /
• 제7권9호
• /
• pp.131-137
• /
• 1999

Under magnetism , as the magneticfluid is being itself magnetized, increase the apparent viscosity because of its body force and has the magnetic characteristics in response ot magnetism, the magnetic fluid is getting attention in various field. The magnetic fluid has the fluidity, which is a special characteristics of fluid and the magneticism , which is a special one of solid. Using this characteristics, this study has been proceeded to show the basic data for developing of a viscous damper with magnetism fluid as hydraulic fluid. Experimental study shows that the application of magnetic field is effective reducing the resonance characteristics of the spring-mass system.