• Food Science and Preservation
• /
• v.30 no.1
• /
• pp.132-145
• /
• 2023

In this study, culture conditions were optimized to confirm the feasibility of Acetobacter pasteurianus as a starter for fermentation vinegar. Acetobacter pasteurianus strain can be used as a food ingredient. The optimal temperature and pH conditions of the selected Acetobacter pasteurianus SRCM101388 were 28℃ and pH 6.00, respectively. The response surface methodology (RSM) was used to optimize the composition of the medium, and Plackett-Burman design (PBD) was used to obtain the effective selection of culture medium, resulting in that glucose, sucrose, and yeast extract had the highest effect on increasing biomass. The optimal concentration, which was performed by central composite design (CCD), were determined to be 10.73 g/L of glucose, 3.98 g/L of sucrose, and 18.73 g/L of yeast extract, respectively. The optimal concentrations of trace elements for the production of biomass were found to be 1 g/L of ammonium sulfate, 0.5 g/L of magnesium sulfate, 2 g/L of sodium phosphate monobasic, 2 g/L of sodium phosphate dibasic, and the final optimized medium was pH 6.10. When incubated in a 5 L jar fermenter, the SRCM101388 strain showed a faster-dissolved oxygen (DO) reduction at a lower agitation rate (rpm), and it was able to grow even at reduced DO level when aeration was maintained. The amount of final biomass produced was 2.53±0.12×10⁹ CFU/mL (9.40±0.02 log CFU/mL) when incubated for 18 hours at 150 rpm, 0.5 vvm, pH 6.0, and 28℃.

• Journal of Korean Neurosurgical Society
• /
• v.29 no.10
• /
• pp.1296-1302
• /
• 2000

Objective : Traumatic brain injury including diffuse axonal injury has been shown to result in a decrease in brainfree magnesium concentration, an endogenous inhibitor of calcium entry into neuron, that is associated with the development of neurological motor deficits. The goal of this study is to establish the therapeutic window during which the therapy with $MgSO_4$ and/or hypothermia improve damaged neurons by TUNEL stain. Method : Moderate brain injury was induced in 64 adult Sprague-Dawley rats, weighing 350 to 450gm each, by using a simple weight-drop device(Marmarou model). The animals were randomly assigned to four groups(sixteen rats each, a control group, a group treated with $MgSO_4$, a group treated with hypothermia, and a group treated with $MgSO_4$ and hypothermia) and the rats in each group were sacrificed and studied after 12 hrs, 24 hrs, 1 wk, and 2 wks after insult. In hypothermic group, these rats were subjected to hypothermia after injury, with their rectal temperatures maintained at $32^{\circ}C$ for 1 hour. After 1-hour period of hypothermia, rewarming to normothermic level was accomplished over 30-minute period. In the groups treated $MgSO_4$, hypothermia and $MgSO_4$ were subsequently treated with $MgSO_4$($750{\mu}moles/kg$) infused intra-muscularly at 30 minutes after trauma. Result : In all treated groups, a significant reduction in TUNEL positive cells was found in comparison with the control group each time(p<0.001). Between treatment groups, No differnce was seen 12hrs, 24hrs, and 1wk. However, hypothermic group treated with or without $MgSO_4$ showed more significant reduction in apoptotic cells than group treated with $MgSO_4$ 2 weeks after trauma(p<0.05). However, hypothermic group treated with $MgSO_4$ showed no significant reduction in apoptotic cells compared with hypothermic group(p>0.05). Conclusion : These findings suggest that both hypothermia and $MgSO_4$ significantly improve pathological changes. Otherwise simultaneously $MgSO_4$ and hypothermia treatment groups is failed to provide additional neuroprotection. These results may be relevant to the design of future clinical trials of therapeutic hypothermia and $MgSO_4$ for traumatic brain injury.

• Journal of the Korea Concrete Institute
• /
• v.27 no.6
• /
• pp.641-649
• /
• 2015

The purpose of this study was to assess the durability of high-strength concrete with high volume mineral admixture (HVMAC) derived from previous studies within ternary blended concrete (TBC) and normal concrete (NC). Four durability evaluation types such as chloride penetration resistance, freezing and thawing resistance, carbonation resistance in two pre-treatment conditions, and sulfuric acid and sulfate resistance using 5% sulfuric acid ($H_2SO_4$), 10% sodium sulfate ($Na_2SO_4$), and 10% magnesium sulfate ($MgSO_4$) solution were selected and performed in this study. HVMAC showed the excellent chloride penetration resistance in any age and the freezing and thawing durability close to 100%. In addition, HVMAC affected more reduction in carbonation resistance than TBC. When the curing time was increased, to create a concrete internal organization densely improved resistance to carbonation. HVMAC also showed the most superior in sulfuric acid and sulfate resistance. As the reduction of calcium hydroxide and $C_3A$ to apply a large amount of admixture reduced the swelling and cracking of concrete, the strength reduction and mass change of concrete was found to be small indicated.

• Korean Journal of Environmental Agriculture
• /
• v.34 no.1
• /
• pp.30-37
• /
• 2015

BACKGROUND: During the winter, the use of deicers was rapidly increased for reduction of traffic accidents as well as injuries in Korea, whose components are largely comprised of calcium chloride and sodium chloride. Recently, to reduce the adverse effects of chloride-deciers such as pollution of water and soil, and decrease of agricultural productivity, the attention of eco-friendly deciers have been increased. This study aimed to investigate biological effects of magnesium chloride deicer (PC-10) and organic acid deicer (EFD-1) against wheat, barley, and spinach. METHODS AND RESULTS: We examined the effect of two deciers, PC-10 and EFD-1 on the seed germination and growth of wheat, barley and spinach. EFD-1 showed higher suppression of the germination than PC-10 among tested crop seeds. In demage index of the seedlings of the crops, there was no symptoms in spinach such as spotting and color change of leaves. EFD-1 showed much stronger inhibitory effect on the germination of tested crop seeds than PC-10 when crops were exposed continuously to tested deciers in soils. The growth and shoot and root in examined crops was relatively higher in PC-10 treatment than in EFD-1 treatment when compared to the control. The biomass decrease was found in all examined conditions of deciers. PC-10 showed 23-35% reduction of biomass whereas EFD-1 exhibited 39-84% loss in all examined crops at over 2% concentration. CONCLUSION: These results suggest that the effects of deicers used in this study by inputting into soil against growing tested crops cause the reduction of germination of seeds, growth, and biomass compared to the control.

• Resources Recycling
• /
• v.26 no.5
• /
• pp.54-60
• /
• 2017

In this study, we investigated the effect of $TiCl_4$ injection time on the Kroll reaction at a given weight ratio of $TiCl_4$ and Mg. The reduction reaction was investigated by measuring the temperature change according to $TiCl_4$ injection time and observing the cross section and appearance of the Ti sponge after the reaction. The temperature increment due to Kroll reaction heat generation was found to be linearly proportional to the $TiCl_4$ feed rate. In the graph of $TiCl_4$ injection time and reduction tank temperature, initial temperature peaks were observed irrespective of the injection conditions. This is interpreted to mean a temporary interruption of reaction due to $MgCl_2$ formation after the initial Kroll reaction. In addition, when the cross section of the sponge was observed, a large amount of spherical Mg particles was observed in $MgCl_2$. We can infer that this is the process of continuously feeding the unreacted Mg surface, so that a continuous Kroll reaction takes place. The sponge appearance showed that the coalescence or growth of the Kroll reacted Ti particles can be controlled by the cooling rate.

• The Journal of Internal Korean Medicine
• /
• v.29 no.2
• /
• pp.348-358
• /
• 2008

Objective : The aim of this experimental study was to investigate the anti-diarrhea effects of Jisa-tang using mice and guinea pigs. Methods : We feed Jisa-tang to mice and guinea pigs to investigate its effects for anti-diarrhea action. We observed its actions on gastrointestinal smooth muscles, on the transportability of small and large intestines, on diarrhea induced by castor oil and magnesium sulfate, and on enteropooling by castor oil and prostaglandin $E_2(PGE_2)$. Results : 1. Jisa-tang showed alleviation, depending on the density, only on the contraction of mice's gastrointestinal smooth muscles induced by histamine. 2. The transportability of the small intestine was not significantly constrained by Jisa-tang. However, the enhancement of pyridostigmine-induced transportability of he small intestine was significantly constrained in the group administered 900mg/kg of Jisa-tang (p<0.05). 3. The transportability of large intestine was significantly constrained in the group administered 1,800mg/kg of Jisa-tang. 4. Jisa-tang showed significant anti-diarrhea effects on diarrhea induced by castor oil and by $MgSO_4$ in the group administered 1,800mg/kg of Jisa-tang. 5. Significant reduction of effects of enteropooling induced by caster oil and by prostaglandin $E_2$ were observed only in the group administered 1,800mg/kg of Jisa-tang. Conclusions : We conclude that Jisa-tang has advantageous effects on drug-induced diarrhea and will contribute to the development of diarrhea treatment through further related studies.

• Korean Journal of Materials Research
• /
• v.24 no.9
• /
• pp.465-468
• /
• 2014

The crystallization effects of boron (B) powder on the phase, full width at half maximum (FWHM) values, and critical properties were investigated for in-situ reacted $MgB_2$ bulk superconductors. The semi-crystalline B powder was heat-treated at different temperatures of 1000, 1300 and $1500^{\circ}C$ for 5 hours in an Ar atmosphere. Then, using as-received and heat-treated B powders, the $MgB_2$ samples were prepared at $600^{\circ}C$ for 40 hours in an Ar atmosphere. As the heat-treatment temperature of the B powder increased, both the particle size of the B powder and crystalline phase increased. In the case of $MgB_2$ samples using B powders heat-treated at above $1300^{\circ}C$, unreacted magnesium (Mg) and B remained due to the improved crystallinity of the B powder. As the heat-treatment temperature of B powder increased, the critical current density of $MgB_2$ decreased continuously due to the reduction of grain boundary density and superconducting volume caused by unreacted Mg and B.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.2
• /
• pp.198-203
• /
• 2016

We investigate the effects of magnesium (Mg) suppressor layer on the electrical performances and stabilities of amorphous indium-zinc-tin-oxide (a-ITZO) thin-film transistors (TFTs). Compared to the ITZO TFT without a Mg suppressor layer, the ITZO:Mg TFT exhibits slightly smaller field-effect mobility and much reduced subthreshold slope. The ITZO:Mg TFT shows improved electrical stabilities compared to the ITZO TFT under both positive-bias and negative-bias-illumination stresses. From the X-ray photoelectron spectroscopy O1s spectra with fitted curves for ITZO and ITZO:Mg films, we observe that Mg doping contributes to an enhancement of the oxygen bond without oxygen vacancy and a reduction of the oxygen bonds with oxygen vacancies. This result shows that the Mg can be an effective suppressor in a-ITZO TFTs.

• Korean Chemical Engineering Research
• /
• v.54 no.5
• /
• pp.712-718
• /
• 2016

Platinum catalysts supported on the mesoporous material synthesized from Y zeolite were applied to synthesis of jet-fuel through n-octadecane hydroupgrading. The mesoporous aluminosolicate, $MMZ_{HY}$ was synthesized using Y zeolite as its framework source. The effect of the addition of Mg to $Pt/MMZ_{HY}$ catalyst for n-octadecane hydroupgrading was investigated. Catalyst characterization was performed with X-ray diffraction, $N_2$ adsorption, temperature-programmed reduction in hydrogen flow, temperature-programmed desorption of ammonia, and infrared spectroscopy of adsorbed pyridine. The high yield of jet-fuel over the $PtMg(2.0)/MMZ_{HY}$ can be attributed not only to the higher dispersion of Pt metal and higher reducibility, but also the higher amount of acid sites and higher strength of acid sites. The selectivity to iso-paraffin in the jet-fuel fraction could be reached above 80% over the optimized $PtMg/MMZ_{HY}$ catalyst.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2005.11a
• /
• pp.196-197
• /
• 2005

Cathodic protection is one of the successful ways to prevent corrosion of steel structures in marine environments. The unique feature of cathodic protection in seawater is the formation of calcareous deposits on cathodic metal surface. The formation principles of calcareous deposit seawater had been known for a long time. That is, cathodic reduction reactions associated with cathodic protection in seawater generate $OH^-$ at the metal surface in accordance with the formular ; 1/2 $O_2$ + $H_2O$ + $2e^-$ $2OH^-$ and $2H_2O$ + $2e^-$ ${\rightarrow}$ $H_2$ + $2OH^-$. These reactions increase the pH at the metal / seawater interface. The high pH causes precipitation of $Mg(OH)_2$ and $CaCO_3$ in accordance with the formular ; $Mg^{2+}$ + $2(OH)^-$ ${\rightarrow}$ $Mg(OH)_2$ and $Ca^{2+}$ + $HCO_3^-$ + $OH^-$ ${\rightarrow}$ $H_2O$ + $CaCO_3$. These are typically the main compounds in calcareous deposits. It obviously has several advantages compared to the conventional coatings, since the environment-friendly calcareous deposit coating is formed by the elements($Mg^{2+}$, $Ca^{2+}$) naturally present in seawater. In this study, environmental friendly calcareous deposit films were prepared on steel plates by electro plating technic in natural seawater. The influence of current density on composition ratio, structure and morphology of the coated films were investigated by scanning electron microscopy formation process of calcareous deposits films in natural seawater. And we confirmed the properties of all the films can be improved greatly by controlling the material structure and morphology with effective use of the electroplating method in natural seawater.