• Journal of Chest Surgery
• /
• v.33 no.1
• /
• pp.51-59
• /
• 2000

Background: Magnesium is one of the important intracellular cations. Hypomagnesemia is common after an open heart surgeryand may affect the development of posoperative arrhythmias. The aims of this study were to identify 1) the severity of the hypomagnesemia 2) the adequate dose of the magnesium replacement and 3) the effect of magnesium replacement on the postoperative arrhythmias. Material and Method: The serum magnesium level was measured in 20 patients in whom magnesium was replaced postopertively(6gm at the operative day 4gm at the 1st postoperative day and 2gm at the 2nd postoperative day) and compared with that of the 13 patients in whom magnesium was not replaced postopertively The serum magnesium level was normalized after magnesium replacement. We analyzed the development of arrhythmias in the patients groups who did not receive magnesium and were operated on between Oct. 1994 and Oct. 1995(Group I; n=206) and who received the magnesium postoperatively and were operated on between Nov. 1995 and Aug. 1996(Group II; n=133) Result: There were no differences in the preoperative risk factors and the rate of postoperative supraventricular or ventricular tachyarrhythmia occur-rences irrespectivel of the magnesium replacement. Magnesium replacement could prevent the aggrevation of the occurrence of postoperative arrhythmias in high risk groups of ventricular tachyarrhytnmia in old age but magnesium could not prevent postoperative arrhythmia in other high risk groups. Conclusion: The magnesium replacement after open heart surgery could prevent the development of ventricular tachyarrhythmias especially in old age groups but could not prevent atrial tachyarrhthmias.

• Resources Recycling
• /
• v.20 no.3
• /
• pp.3-11
• /
• 2011

Magnesium has been used as parts of vehicles, case materials of notebook PC and mobile phone, and its demand has been increasing recently. So until now, there has little magnesium scraps from the end of life vehicles or electronic parts, and most scraps has been generated from magnesium processing lines such as melting, die casting and machining. It is to review the present status of magnesium recycling. Here, domestic demand of magnesium, recycling amount and technologies used in domestic recycling companies were surveyed in recent years. In 2010, 8,840 tons of magnesium scraps were processed and used as raw materials for die casting products. The recycling ratio was estimated as 32.5%.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.2
• /
• pp.225-228
• /
• 1992

The study was undertaken to determine the effect of various levels of dietary magnesium on the metabolizability of magnesium in laying Tsaiya ducks and Leghorn hens. Twenty-five Tsaiya ducks and 25 Leghorn hens were raised in individual cages. The basal diet was mainly consisted of corn starch and isolated soybean protein. At the beginning of the experiments, birds were fed the basal diet added with 500 mg/kg Mg (1070 mg/kg in total by analysis) for 10 days in order to make the birds adapt to the new diet. Then, they were randomly divided into five treatments with five birds for each treatment and fed the experimental diets containing 690, 1070, 1690, 2150 or 2380 mg/kg Mg for 21 days and during the last five days excreta were collected. The experiment was repeated three times each at the age of 25, 31 and 36 weeks. The metabolizability of magnesium in the diet was determined by the indicator method. The metabolizabilities of magnesium for Tsaiya duck and Leghorn hen were 59.9% and 62.5%, respectively as the diet contained 690 mg/kg magnesium, and were significantly decreased (p<0.05) to 39.7 and 30.7%, respectively when the dietary magnesium content was increased to 2380 mg/kg.

• Korean Journal of Materials Research
• /
• v.27 no.1
• /
• pp.53-61
• /
• 2017

Magnesium alloys are of emerging interest in the automotive, aerospace and electronic industries due to their light weight, high specific strength, damping capacity, etc. However, practical applications are limited because magnesium alloys have poor formability at room temperature due to the lack of slip systems and the formation of basal texture, both of which characteristics are attributed to the hcp crystal structure. Fortunately, many magnesium alloys, even commercialized AZ or ZK series alloys, exhibit superplastic behavior and show very large tensile ductility, which means that these materials have potential application to superplastic forming (SPF) of magnesium alloy sheets. The SPF technique offers many advantages such as near net shaping, design flexibility, simple process and low die cost. Superplasticity occurs in materials having very small grain sizes of less than $10{\mu}m$ and these small grains in magnesium alloys can be achieved by thermomechanical treatment in conventional rolling or extrusion processes. Moreover, some coarse-grained magnesium alloys are reported to have superplasticity when grain refinement occurs through recrystallization during deformation in the initial stage. This report reviews the characteristics of superplastic magnesium alloys with high-strain rate and coarse grains. Finally, some examples of SPF application are suggested.

• Journal of Climate Change Research
• /
• v.5 no.3
• /
• pp.219-230
• /
• 2014

In this study, greenhouse gas emission of magnesium industry was estimated and the reduction potential of the greenhouse gas emission was evaluated with reduction technologies. Default value of IPCC guideline was used to calculate the greenhouse gas emission and $SF_6$ alternatives were considered in reduction potential. Import of magnesium ingot was 22,806 ton in 2013, which will be expected to increase to 81,700 ton with 20% rate in 2020. Magnesium ingot was consumed to produce magnesium alloy in diecasting process. Recently, commercial production of crown magnesium and magensium plate began. Based on ingot consumption, $CO_2$ emission of domestic magnesium industry was estimated to 504,000 ton, which is about 0.79% of domestic industrial emissions. Reduction potential of diecasting process was estimated to 489,320 ton by changing SF6 to alternative gases such as HFC-134a, Novec-612. Emission factor of Tier 3 level should be developed to enhance the accuracy of greeenhouse gas emission of magnesium industry.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.5
• /
• pp.551-564
• /
• 2003

Statement of problem : Magnesium oxide may increase pH of alginate, and supply magnesium ions to the polymerization reaction of alginate. Purpose : This study was designed to evaluate the influence of incorporation of magnesium oxide to alginate composition. Material and Method : Seven kinds of experimental alginates were prepared and used for the experiments. Components with unchanging concentrations were sodium alginate 15%, calcium sulfate 14%, sodium phosphate 2%, and zinc fluoride 3%. Contents of magnesium oxide were varied as 0%, 1%, 2%, 3%, 4%, 5%, 6%. Diatomaceous earth were added to each experimental groups as balance to be 100%. Control group was a MgO 0% group. Working time, setting time, elastic recovery strain in compression, compressive strength and tear resistance were measured were measured. Sample size for each groups were 10. Arithmetic means were used as each groups representative values. Regression test between MgO contents and results, Duncan's multiple range test, and One-way ANOVA test were done between groups at level of 0.05. Results : 1 Magnesium oxide made the working time and setting time as longer(p<0.0001). 2 Magnesium oxide did not alter the elastic recovery(p>0.05). 3. Magnesium oxide contents between 2% and 4% exhibited the lowest strain in compression on alginates(p<0.0001). 4. Magnesium oxide made the compressive strength and the tear resistance stronger(p<0.0001). Conclusion : These results mean that setting time of alginate maybe controlled and that mechanical properties maybe improved by the incorporation of magnesium oxide into alginate, without any reduction of elasticity.

• Corrosion Science and Technology
• /
• v.7 no.3
• /
• pp.162-167
• /
• 2008

Degradable implants have been in use for bone surgery for decades. However, degradable metal implants are one of the new research areas of biomaterials science. Magnesium has good biocompatibility due to its low toxicity, and it is a corroding, i.e. dissolvable, metal. Furthermore, magnesium is needed in human body, and naturally found in bone tissue. There have been some published reports also asserting the potential bone cell activation or bone healing effect of high magnesium ion concentrations. The classic method for achieving intertransverse process fusion involves autogenous iliac crest bone graft. Several investigations have been performed to enhance this type of autograft fusion. However, there is no research which has been undertaken to investigate the efficiency of pure magnesium particles in posterolateral spinal fusion. In this study, corrosion behavior of magnesium metal at the bone interface, the possibility of new bone cell formation and the degree of effectiveness in producing intertransverse process lumbar fusion in a sheep model have been investigated. Cortical bone screws were machined from magnesium alloy AZ31 extruded rod and implanted to hip-bones of sheep via surgery. Three months after surgery, the bone segments carrying these screws were removed from the sacrificed animals. Samples were sectioned to reveal Mg/bone interfaces and investigated using optical microscope, SEM-EDS and radiography. Optical and SEM images showed that there was a significant amount of corrosion on the magnesium screw. The elemental mapping results indicate, due to the presence of calcium and phosphorus elements, that there exists new bone formation at the interface. Furthermore, sixteen sheep were subjected to intertransverse process spinal fusions with pedicle screw fixation at various locations along their spines. Each animal was treated with 5cc autograft bone at one fusion level and 1cc magnesium+5cc autograft bone at the other. Six months after surgery, bone formation was evaluated by gross inspection and palpation, and radiological, histological, scanning electron microscopic and x-ray diffraction analyses. It may be stated that the potential for using useful corrosion of magnesium alloys in medical applications is expected to be significant.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2007.05a
• /
• pp.294-297
• /
• 2007

Due to their low densities and high specific strength and stiffness, magnesium alloy sheets are very attractive lightweight materials for automotive and electrical products. However, the magnesium alloy sheets are usually formed at elevated temperature because of their poor formability at room temperature. To use of the magnesium alloy sheets for an industrial, their mechanical properties at elevated temperature and appropriate forming process conditions have to be developed. In this study, non-isothermal simulations of a square cup drawing from magnesium alloy sheets have been conducted to evaluate a proper forming process conditions such as the tool temperature, the tool shoulder radius, friction between the blank and the tools. According to this study, appropriate forming process conditions of square cup drawing at elevated temperature from magnesium alloy sheets are suggested.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.57-60
• /
• 2008

Magnesium alloys usage has been increased every year owing to its lightness, damping capacity, and EMI shielding, etc. In case of magnesium, it is mainly produced by diecasting due to high fluidity of melts. But, casting defect occurs many times because of low heat capacity of the magnesium. Therefore, wrought products can be applied for defect-free and mechanical properties. but it is insufficient in market share because of crystalline structure. The domestic market of wrought magnesium products are not revitalized compare to advanced countries. Accordingly we are going to forecast a domestic market of wrought products through searching the present of korean magnesium industry.

• Journal of Powder Materials
• /
• v.21 no.4
• /
• pp.260-265
• /
• 2014

In this study, in order to increase surface ability of hardness and corrosion of magnesium alloy, anodizing and sealing with nano-diamond powder was conducted. A porous oxide layer on the magnesium alloy was successfully made at $85^{\circ}C$ through anodizing. It was found to be significantly more difficult to make a porous oxide layer in the magnesium alloy compared to an aluminum alloy. The oxide layer made below $73^{\circ}C$ by anodizing had no porous layer. The electrolyte used in this study is DOW 17 solution. The surface morphology of the magnesium oxide layer was investigated by a scanning electron microscope. The pores made by anodizing were sealed by water and aqueous nano-diamond powder respectively. The hardness and corrosion resistance of the magnesium alloy was increased by the anodizing and sealing treatment with nano-diamond powder.