• 한국생산제조학회지
• /
• 제23권5호
• /
• pp.519-524
• /
• 2014

The use of light weight magnesium alloy offers significant potential towards improvement of the automotive fuel efficiency. However, the application of formed magnesium alloy components in auto-body structures is restricted due to the low formability at room temperature and lack of knowledge for processing magnesium alloys at elevated temperatures. In this study, a warm tensile test of magnesium alloys was performed to measure tensile strength and elongation. An improvement in formability was confirmed at increased temperatures above about $250^{\circ}C$. Car body warm forming technology was conducted for forming forming reinforced dash components of the magnesium alloy AZ31B sheet at elevated temperatures.

• 한국환경보건학회지
• /
• 제3권1호
• /
• pp.13-16
• /
• 1976

Authors investigated the analyse trace elements in vegetables and Ginseng which indicated as follows: 1. Garlic, ginger, and onion has considerably large amounts of magnesium, garlic has in proper sequence as copper, aluminum, magnesium, bromine and mercury. Ginseng has in proper sequence as aluminum, magnesium, copper, bromine and mercury, and onion has in proper sequence as copper, manganese, aluminum, bromine and mercury. 2. Carrot has considerably large amounts of magnesium and has in proper sequence as copper, magnesium, aluminum, bromine and mercury. 3. Ginseng also has large amounts of magnesium and has in proper sequence as magnesium, aluminum, copper, bromine, and mercury.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.546-547
• /
• 2007

Magnesium is widely used as a lightweight alloy for car engine components and case of cellular phone. Extraction technologies of magnesium are divided to fused salt electrolysis process and thermal reduction process. In this study, electrolysis magnesium is prepared by fused salt electrolysis process with magnesium chloride. We compared two kinds of mixed salt at 7V. As a result, 47% of current efficiency was obtained by electrolyzing KCl/NaCl/$MgCl_2$ mixed salt bath at $760^{\circ}C$, and purity of the prepared magnesium was over 98%. With this study, we can scale up fused salt electrolysis device and accumulate basic data which will be needed for designing an electrolysis cell.

• 대한금속재료학회지
• /
• 제48권3호
• /
• pp.241-247
• /
• 2010

In order to develop the vacuum distillation process of magnesium alloy scrap, a fundamental study on the evaporation behavior of magnesium alloy (AM50) scrap melt was carried out. Melt temperature, pressure, reaction time, and initial specific surface area of melt were considered as experimental variables. The evaporation rate of magnesium increased with the increase of melt temperature and initial specific surface area of melt, and with the decrease of the pressure. The activation energy of magnesium evaporation reaction calculated by an Arrhenius plot decreased with the decrease of the pressure and with the increase of the initial specific surface area of melt. An empirical equation was derived for the evaporation rate of magnesium from AM50 alloy melt.

• Journal of Electrochemical Science and Technology
• /
• 제13권4호
• /
• pp.486-496
• /
• 2022

The effect of solution-treated on the self-corrosion performance and discharge performance of AZ91 magnesium alloy as anode material was analyzed by microscopic characterization, immersion tests, electrochemical measurements, and discharge performance tests. The study shows that the β-phase in the AZ91 magnesium alloy gradually dissolved in the matrix with the increase of the solution temperature, and the electrochemical activity of the magnesium alloy anode was significantly improved. Through the comparison of three different solution-treated processes, it is found that the AZ91 magnesium alloy has the most vigorous activity and better discharge performance after solution-treated of 415℃+12 h. In addition, the proportion and distribution of β-phase AZ91 magnesium alloy have a direct impact on its discharge performance as an anode material.

• Journal of Yeungnam Medical Science
• /
• 제26권2호
• /
• pp.93-101
• /
• 2009

The use of magnesium sulphate has recently increased in anesthesiology and pain medicine. The roles of magnesium sulphate are as an analgesic adjuvant, a vasodilator, a calcium channel blocker and reducing the anesthetic requirement. These effect are primarily based on the regulation of calcium influx into the cell and antagonism of the N-methyl-D-aspartate receptor. We discuss here the clinical effects of magnesium sulphate on anesthesiology and pain medicine.

• 대한치과의사협회지
• /
• 제12권5호
• /
• pp.309-312
• /
• 1974

The auther observed the effect of dietary magnesium dificiency on the periodontal ligament of albino rats. The experimental animals wre fed with a diet deficient in magnesium for 1,2 and 3weeks. The sections were stained van Gieson, Mallory azan. Massons-Gomori's one step trichrom. Biolschowsky-Gomori, PAS reaction and Halmi stain. After 2 and 3weeks with dietary magnesium deficiency, argyrophilic fiber of periodontal ligament were showed increased-reactivity. Oxytalan fibers were not changed by magnesium deficiency.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2007년 추계학술발표대회 개요집
• /
• pp.144-145
• /
• 2007

Magnesium alloys are the lightest in commercial alloys. Also, they have high damping capacity and the shielding effect of electromagnetic waves. Recently, magnesium alloys have received considerable attention from the transportation industry. Many manufacturers of cars try to increase the use of magnesium alloys in their product. In order to evaluate the weldability of magnesium alloy, gas-tungsten arc welding(GTAW) have been applied to the AZ31, AZ61 and AZ91 alloys and established the optimum welding conditions.

• Bulletin of the Korean Chemical Society
• /
• 제13권1호
• /
• pp.48-53
• /
• 1992

The reactions of ${\beta}-aryl-{\alpha},{\beta}-epoxy$ silanes with magnesium bromide or magnesium iodide in the presence of excess magnesium in ether at room temperature afforded vinylsilanes in 18-100% yields. E-Vinylsilanes were predominant over Z-isomers (> 80%) regardless of the stereochemistry of ${\alpha},{\beta}-epoxy$ silanes.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.149-153
• /
• 2008

Since magnesium alloy sheets have been employed in industrial field which requires the light weight and thin engineering components, most of researches have been focused on the formability of magnesium ahoy sheet. In warm press forming of magnesium alloy sheet, it is important to control the sheet temperature by heating the sheet in closed die. When forming a commercial AZ31 magnesium alloy sheets which are 0.5mm and 1.0mm thick, respectively, time arriving at target temperature and temperature variation in magnesium alloy sheet have been investigated. Sheet metals were mostly formed in simple shapes such as circular or rectangular. Few studies about forming of complex shapes were reported. Thus, the formability of magnesium alloy sheet for complex shapes is investigated. The process variable for a double sink shape deep drawing with circular and rectangular shape was investigated by varying temperature, velocities, and clearances. Accordingly, temperature, velocities, and clearances suitable for forming were suggested through investigating the thickness variation of the product.