• Journal of Electrical Engineering and Technology
• /
• 제11권5호
• /
• pp.1299-1304
• /
• 2016

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.107-110
• /
• 1994

This paper focuses on the dynamic interaction between travelling vehicle and flexible guideway rail system. From a numerical analysis on the simply supported beam vibration excited by a sequence of magnetic force, we studied the dynamic response of MAGLEV.

• 한국철도학회논문집
• /
• 제18권3호
• /
• pp.175-185
• /
• 2015

일반적으로 열차분야에서 분기기 시스템은 안전성과 직접적으로 연관되기 때문에 높은 신뢰성이 요구된다. 특히 자기부상열차의 분기기 시스템은 대차가 궤도를 감싸는 구조적 특징으로, 고가궤도 전체가 움직여야 한다. 이러한 이유로 자기부상열차의 분기기는 강 재질로 설계되었다. 강 거더의 분기기는 콘크리트 거더에 비하여 진동측면뿐만 아니라 거더의 처짐에도 취약하다. 그러므로 자기부상열차가 유연한 분기기 위를 통과 할 때, 부상안정성 예측이 매우 중요하다. 본 논문의 목표는 자기부상열차와 분기기 거더의 연성된 동역학 해석모델을 개발하고, 공진예측 및 차량의 부상안정성 예측에 있다. 이를 위해서 차량의 3차원 다물체 동역학 모델을 개발 하였고, 분기기 거더와 모달중첩법을 이용한 연성모델링을 수행하였다. 개발된 해석모델은 실측 실험과 비교를 통해서 해석모델의 타당성을 검증하였다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 춘계학술대회 논문집
• /
• pp.824-829
• /
• 2011

EMS-type Maglev vehicle maintains constant levitation air-gap between electromagnet and guideway by using gap sensor. The other words, when Maglev vehicles levitating over the guideway, mass of the vehicle effects through 1st (electromagnetic air-gap control) and 2nd (air-spring) suspension to grider. Resonace between electromagnetic suspension and grider could be occurred, which causes instability and poor ridecomfort. This paper is to test the dymanic interaction between levitation air-gap and switching system grider that has less mass and high natural frequencies than other type of general girders.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2009년도 춘계학술대회 논문집
• /
• pp.1218-1223
• /
• 2009

LIM(Linear induction motor)s are the main type of motors used for urban Maglev vehicles because they are less expensive to operate at a lower speed than linear synchronous motors. An LIM generates an attraction force while running, which perturbs the air gap of the electromagnet. This undesirable air gap variation could result in the mechanical contact of an electromagnet with the reaction plate. For this reason, the magnitude of the air gap variation must be limited within a certain range. The air gap changes when running the 1/2 vehicle under development for testing are analyzed through a test on the test track at KIMM. The results from this study could be used to minimize the air gap variations due to attraction force from LIM.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1998년도 창립기념 춘계학술대회 논문집
• /
• pp.450-457
• /
• 1998

Abstract - Linear Synchronous Motor has a large airgap comparing with rotary-type motor and especially, Permanent Magnet Linear Synchronous Motor(PM-LSM) which uses permanent magnet as a magnetic field, has a very large effective magnet airgap owing to permanent magnet structure. Accordingly, in case of 2-D analysis of the motor, the analysis error becomes large because leakage flux by which normal direction of the analysis region can not be considered, In this paper, the characteristic of PM-LSM for Maglev vehicle is analyzed exactly by 3-D Finite Element Method(3-D FEM). As the result, the effect of lateral-direction airgap magnetic flux density distribution on the analysis precision has been investigated and the motor characteristics according to primary motor parameter have been also made clear quantitatively. The accuracy of 3-D FEM has been confirmed by comparing the calculated results with the experimental results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 A
• /
• pp.308-311
• /
• 1998

Experiments and design efforts have been made to develope a hybrid-type magnet for magnetically levitated(MAGLEV) vehicle using NdFeB permanent magnet. The permanent magnet, which embedded in both poles of the magnet, has been designed, analyzed using FEM program. The model is manufactured and tested to verify its performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 추계학술대회 논문집 학회본부
• /
• pp.12-14
• /
• 1996

Static tests on the performance of the electromagnets of the electromagnetic maglev vehicle were conducted. Performance of the magnets wound with the alumimum sheet were tested and compared with that of the magnets constructed with aluminum coils of rectangular cross section. It turns out that with the use of the aluminum sheet we can improve the lifting force per magnet by 19.5% and thereby make electromagnets lighter than those made with the aluminum coils of rectangular cross section.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2011년도 정기총회 및 추계학술대회 논문집
• /
• pp.2585-2593
• /
• 2011

Maglev train system has been continuously received attention as it provides good ride quality and low noise and vibration level. Furthermore it is an eco-friendly transport system with little dust pollutant. However the dynamic performance of the vehicle has been influenced by the track layout and the structural stability of guideways and girders, etc. Especially the levitation control of magnetic module is the most important performance of the Maglev system and is very sensitive about the control algorithm and the parameters of the controller. In this paper, the co-simulation of the control and dynamic model has been proposed and the simulation results for the running simulation on the curve track has been shown.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1996년도 하계학술대회 논문집 A
• /
• pp.18-21
• /
• 1996

This paper deals with experimentation on static test of linear induction motor for the propulsion system of UTM(Urban Transit Maglev). It is very important that vertical force zero effects to levitation field of maglev. Because it is continuous for air gap 11mm of levitated maglev vehicle. Then we found the slip frequency that the vertical force zero due to it is variable. Thus we had compared between simulation value and experiment value for lim by static test Jig.