• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 춘계공동학술대회
• /
• pp.471-484
• /
• 2006

The focus of analysis is effect on Non-electrical Machinery and Equipment of Macroeconomic variables through long-term and short-term periods. Also, this paper is related with implication on steady growth possibility of Non-electrical Machinery and Equipment. The period of variables is from 1985 to April in 2005. In case of not-available data is treated as missing figures. As spatial scope, these data are Non-electrical Machinery and Equipment on the basis of KSIC. In case of items, it composes MTI 1&3 digit of Korea International Trade Association (KITA), on the basis of HSK & classification of Korea Machinery industries. According to Granger causality test, yield of Cooperate Bond and export amount of Machinery have a meaning at statistical Confidence level of 10%. In case of index of the unit cost of export and export amount of Machinery, they have an interactive Granger cause. In yen dollar exchange rate and export amount of Machinery, former variable gives an unilateral Granger cause to latter that.

• 한국유체기계학회 논문집
• /
• 제16권5호
• /
• pp.18-23
• /
• 2013

Thermal aging test is performed to qualify the life time of equipment in thermally aged condition. Due to long life time more than 10 years like as in power plant, the equipment is subjected to the accelerated thermal aging condition which is able to shorten the long aging test period by increasing aging temperature. Normally, conservatism of thermal aging test causes to impose unbalanced and excessive thermal load on components of the equipment, and deformation and damage problems of the components. Additionally, temperature rise of each component through heat generation of the electric equipment leads to long-term problem of the test period. Multi-phase accelerating aging test is to perform thermal aging test in multiple aging conditions after dividing into groups with various components of equipment. The groups might be classified considering various factors such as activation energy, temperature rise, glass transition temperature and melting temperature. In this study, we verify that the multi-phase accelerating aging test method can reduce and equalize the thermal over load of the components and shorten aging test time.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
• /
• pp.1259-1260
• /
• 2006

Intensive technological research on the Dry-bag CIP equipment was carried out to improve the dimensional accuracy and the productivity. The rubber mold design technology using FEM simulation during pressing was introduced, in order to achieve higher dimensional preciseness, and criteria for the selection of the In-line type or Off-line type, were established based on the powder flowability index proposed by Carr. Based on these research results, high productivity Off-line Dry-bag CIP equipment, which can realize good dimensional accuracy with high productivity, was developed even for non-granulated powders with poor packing density.

• 신재생에너지
• /
• 제16권4호
• /
• pp.49-64
• /
• 2020

Photovoltaic and Thermal collector (PV/T) systems are renewable energy devices that can produce electricity and heat energy simultaneously using solar panels and heat exchangers. Since PV/T systems are exposed to the outdoors, their reliability is affected by various environmental factors. This paper presents a reliability test for a PV/T system and evaluates the test results. The reliability assessment entails performance, environment, safety, and life tests. The factor that had the greatest influence on the life of the system was the hydraulic pressure applied to the heat exchanger. A test was conducted by repeatedly applying pressure to the PV/T system, and a reliability analysis was conducted based on the test results. As a result, the shape parameter (β) value of 5.6658 and the B10life 308,577 cycles at the lower 95% confidence interval were obtained.

• Nuclear Engineering and Technology
• /
• 제50권5호
• /
• pp.683-689
• /
• 2018

To evaluate equipment survivability of the polymer Viton, used in sealing materials, the effects of its thermal degradation were investigated in severe accident (SA) environment in a nuclear power plant. Viton specimens were prepared and thermally degraded at different SA temperature profiles. Changes in mechanical properties at different temperature profiles in different SA states were investigated. The thermal lag analysis was performed at calculated convective heat transfer conditions to predict the exposure temperature of the polymer inside the safety-related equipment. The polymer that was thermally degraded at postaccident states exhibited the highest change in its mechanical properties, such as tensile strength and elongation.

• Journal of Ecology and Environment
• /
• 제38권3호
• /
• pp.293-305
• /
• 2015

In order to understand the mechanisms of conversion between different algal dominance, an experiment was performed in a greenhouse from 22 June to 10 July 2011. The experiment included a treatment group subjected to three instances of nutrient enrichment and a control with no nutrient enrichment. The initial water was dominated by Ankistrodesmus of Chlorophyta. The average water temperature at 08:30 h and 14:00 h during the experiment was $31.6^{\circ}C$ and $34.6^{\circ}C$, respectively. The results showed that the total nitrogen (TN), total phosphorus (TP), dissolved total nitrogen (DTN), dissolved total phosphorus (DTP), and soluble reactive phosphorus (SRP) concentrations in the treatment were significantly higher than in the control (P < 0.05). However, the TN/TP and DTN/DTP in the control was higher than in the treatment (P < 0.05). The dominant algae in the control did not change during the experiment, while the dominant algae in the treatment switched to Planktothrix of Cyanophyta on day 9. The chlorophyll a (Chl-a), wet weight of all algae, wet weight of Cyanophyta, and percentage of Cyanophyta in the control were all significantly lower than in the treatment (P < 0.05). Amounts of zooplankton, especially rotifers, were present at the end of the experimental period. The density of rotifers between the control and treatment was not significantly different (P > 0.05), while the copepod density in the treatment was higher than in the control (P < 0.05). We conclude that green algae dominance quickly switches to cyanobacteria dominance after nutrient enrichment in a greenhouse with elevated temperature.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1996년도 International Conference on Agricultural Machinery Engineering Proceedings
• /
• pp.711-714
• /
• 1996

The energy saving base technological processes were substantiated and high efficient equipment for the wet fractionation of the leafstalk biomass of the annual and perennial sown grasses into the multipurpose products was designed.

• 한국생산제조학회지
• /
• 제24권5호
• /
• pp.530-534
• /
• 2015

Ultrasonic nanocrystal surface modification (UNSM) is an example of a nanoscale-surface modification that has become noticeable because of its effects on the mechanical improvement of metallic materials. UNSM equipment needs to be both utilized and improved. The equipment is based on an ultrasonic waveguide whose role is to strike surfaces of metallic materials to achieve nanoscale deformation. In this paper, we introduce the development of one kind of UNSM equipment. Using piezoelectric elements, we repeatedly design and fabricate a 20-kHz ultrasonic waveguide. With respect to the composition of the equipment, the waveguide is automatically transferred by two axial stages automatically. In addition, a static force is constantly applied by pneumatic devices. We perform an experiment to verify the feasibility of the equipment.

• 한국유체기계학회 논문집
• /
• 제7권6호
• /
• pp.7-14
• /
• 2004

A new electrostatic rotary atomizing painting equipment using air turbine was developed for high transfer efficiency. Based on the overall design requirements of painting equipment, basic design specifications of the equipment parts such as air turbine and atomizing disk ate defined from the present conceptual design model. Air turbine is designed with the section profile of NACA airfoil, and its internal flow field is analyzed by commercial CFD code. Atomizing disk is designed to achieve the ligament type spray of paint with the use of visualization technique. Various experiments and tests are conducted to investigate the spray and the transfer characteristics of newly-designed painting equipment, and the measurement results are compared with the those of conventional painting equipments. The comparison results show the present painting equipment is superior to the conventional ones in the aspects of transfer efficiency and coating surface characteristics.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제3권4호
• /
• pp.257-264
• /
• 2015

원자력 발전이 중요한 에너지 공급역할을 담당하기 위해서는 안전성을 확보하고, 사용 후 핵연료 문제를 해결하여야 한다. 이와 같은 문제를 해결하기 위한 방안으로 소듐이나 납비스무스 공융합금 등과 같은 액체금속을 냉각재로 이용하는 방안이 연구되고 있다. 본 논문에서는 액체금속 유동모사 실증 설비 개발을 위한 설계변수 검토, 설계 해석, 구조재의 선정 및 설비 개발 결과를 서술하였다. 설비의 개발은 열수력 해석코드의 해석을 통해 수행되었고 충분한 자연순환 유량을 갖는 설비제작 기술을 확보하였다.