• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.11 no.2
• /
• pp.13-18
• /
• 2005

The ulnar nerve extends down the arm, across the elbow, and into the hand. It provides sensation to the little and ring fingers and activates many of the small muscles in the hand. The determination of peripheral nerve conduction velocity is an important part of ulnar nerve evaluation. The electrodiagnostic value as neurophysiologic investigative procedure has been known for many years but normal value of digital nerve was not reported in Korea. The purpose of this investigation was to measure the digital nerve conduction velocity of ulnar nerve for obtain clinically useful reference value and compare difference in each fingers and then compare with the other countries. 71 normal Korean volunteers (age, 19-65 years; 142 hands) examined who has no history of peripheral neuropathy, diabetic mellitus, chronic renal failure, endocrine disorders, anti-cancer medicine, anti-tubercle medicine, alcoholism, trauma, radiculopathy. Nicolet Viking II (EMG machine) was use for detected conduction velocity and amplitude of digital nerves in ulnar nerve. Data analysis was performed using SPSS. Descriptive analysis was used for obtain mean and standard deviation and independent t-test was used to compare with ring and little finger. Conduction velocity of the right ring finger was 57.44m/sec and little finger was 55.32msec. The left ring finger was 55.55msec and little finger was 54.11msec. Amplitude of the right ring finger was $30.28{\mu}V$ and little finger was $48.36{\mu}V$. The left ring finger was $30.67{\mu}V$ and little finger was $52.76{\mu}V$. There were significantly difference between ring and little in amplitude (p<.05) but there were no statistically difference between conduction velocity of ring and little finger (p>.05). The amplitude of little finger are greater than ring finger. The present results revealed that electodiagnosis can easily perform in little finger for digital nerve of ulnar nerve study.

• The Journal of Korean Academy of Prosthodontics
• /
• v.47 no.2
• /
• pp.199-205
• /
• 2009

Purpose: The purpose of this research was to evaluate the shear bond strength between zirconia core and veneer ceramic after surface treatment. Material and methods: Zirconia cores(N=40, n=10, $10mm{\times}10mm{\times}3mm$) were fabricated according to the manufacturers' instructions and ultrasonically cleaned. The veneering ceramics(thickness 3 mm) were built and fired onto the zirconia core materials. Four groups of specimens with different surface treatment were prepared. Group I: without any pre-treatment, Group II: treated with sandblasting, Group III: treated with liner, Group IV: treated with sandblasting and liner. The shear bond strength was tested in a universal testing machine. Data were compared with an ANOVA and $Scheff{\acute{e}}$ post hoc test(P=.05). Results: The shear bond strength of group VI was significantly higher than the other groups. Conclusion: Both mechanically and chemically treated simultaneously on zirconia core surface influenced the shear bond strength between the core and veneering ceramic in all-ceramic systems.

• Korean Journal of Weed Science
• /
• v.1 no.1
• /
• pp.69-77
• /
• 1981

Six herbicides were evaluated to investigate the phytotoxicity of rice plant and the weeding efficacy influenced by the time of application in mechically transplanted paddy field. The amount of each chemical applied was 3 kg, a. i, /ha. Chlormethoxynil : Rotala indica KOEHNE and Lindernia pyxuiaria PHILCOX were effectively controlled when applied on the 12th day after transplanting (12 DAT) and this herbicide was excellent for the control of Echinochloa crusgalli P. BEAUV, Monochoria vaginalis PRESL and Sagittaria pygmaea MIQ, when applied early (7 days after puddling) but its weeding effect for these weeds decreased greatly as the application time became later. It had a controlling effect for Potamogeton distinctus A. BENN, Cyperus serotinus ROTTB and Scirpus hotarui ROXB at the initial period at the earlier application time. Butachlor was effective in controlling E. crusgalli, R. indica and L. pyxidaria at 12 days after transplanting (DAT) but was not effective in controlling P. distinctus and S. pygmaea even at the early application time. M. vaginalis, C. serotinus and S. hotarui were effectively controlled by the butachlor treatment at 7 days after final puddling (2 DBT-SDAT) but this weeding effect decreased at the late application time. A combination of butachlor and naproanilide excellently controlled E. crusgalli, R. indica, L. pyxidaria and S. pygmaea regardless of the application time. For the control of M. vaginalis, C. serotinus and P. distinctus, the weeding effect of this mixtures was much greater than that of the single treatment of butachlor. Perfluidone was excellent for the control of E. crusgalli, R. indica, L. pyxidaria, M. vaginalis and S. pygmaea at either application time tested. P. distinctus, C. serorinus and S. hotarui could be controlled by this chemicals until the time of first observation (23 DAT) but the effect for these weeds somewhat decreased as time passed. The effect of pyrazolate on E. crusgalli, M. vaginalis, S. hotarui and P. distinctus was very excellent regardless of the application time but R. indica and L. pyxidaria could not be completely eliminated by this chemical. This chemical was effective in controlling C. serotinus when applied at 7-9 days after final puddling and showed a controlling effect for S. hotaruionly at the initial period. Piperophos + dimethametryn was very excellent for the control of all the annual weeds and P. distinctus. It showed a controlling effect on S. pygmaea, C. serotinus and S. hotarui only at the initial period. There was no difference in the effects on phytotoxicity and yield between chlormethoxynil and pyrazolate at either times of application tested. The later the application time was, the less the phytotoxicity of butachlor and piperophos+dimethametryne was. The phytotoxicity of butachlor + naproanilide and perfluidone decrease in the plots treated at the later application time. When the last two chemicals were treated at 2 days before transplanting (DBT) the yield decreased as compared with the hand weeded plot.

• Journal of the Korea Society for Simulation
• /
• v.17 no.2
• /
• pp.63-74
• /
• 2008

The design of best efficient production process is common requirements of the production strategy department and the process planning department to maximize the revenue and accomplish target production volumes in the production periods. And they use several general methods for that-line-balancing, removing of the bottle-neck process, facility ramp-up, increasing of the worker's utilization, etc. But, those methods have depended on analytic, static and arithmetic calculations, yet. So, irregular work-waiting time causing the delay time isn't include in extracting production capacity, especially in the line production process. The work-waiting time is changed irregularly along the variation of each machine and very important for calculate real product lead-time and forecasting target production volumes. At this thesis, i'm going to mention the importance of the delay time of conveyor system which can be extracted by discrete-event simulation. And suggest it as a new main variable that must be considered at designing new production system. Then experimented and tested that's effects in the H-company case, conveyor based line production process.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.233-244
• /
• 1996

The purpose of this study was to compare the shear bond strength obtained from ceramic and plastic brackets bonded with various light-cured adhesives and to evaluate their debonded failure sites. Plastic brackets, Transcend 6000, Signature and Starflre TMB brackets were bonded with Orthobond, Light Bond and Transbond on one hundred forty extracted human premolar teeth as manufacturer's descriptions. After thermocycling the brackets were debonded with an Instron universal testing machine and the debonded bracket base surfaces were inspected under stereoscope to evaluate the failure sites. Also the shear bond strength and failure patterns with different curing time and with two different source of light were compared. The results were as follows. 1. There were no statistically significant differences among the mean shear bond strength of Orthobond, Light Bond and Transbond in a same bracket group except Plastic bracket group(p<0.05). 2. The mean shear bond strength of each adhesive with different bracket groups showed statistically significant differences. Stafire TMB showed the highest shear bond strenght among the brackets in this study, but there was no statistically singnificant difference with Transcend 6000 while there was statistically significant difference with Signature.(p<0.05) 3. The various bonding failure patterns were occurred among different bracket groups but most of failure sites were bracket base -adhesive interfaces. 4. There were no statistically significant differences in shear bond strength between the groups with curing time of 10 second and 20 second, and between the groups with two different sources of light as long as sufficient light intensity(above $400mWcm^2$) were provided(p<0.05). According to the result, it should be considered in clinical use of ceramic bracket with light-cured adhesives that the shear strengths of ceramic brackets were influenced by the retention from of bracket base as well as the composition of bracket and there was no difference in the shear bond strenght among various light-cured adhesives used in this study.

• Investigative Magnetic Resonance Imaging
• /
• v.12 no.2
• /
• pp.100-106
• /
• 2008

The purpose of this study was to confirm the exactitude of in vitro nuclear magnetic resonance spectroscopy(NMRS) and to complement the defect of in vivo NMRS. It has been difficult to understand the metabolism of a cerebellum using in vivo NMRS owing to the generated inhomogeneity of magnetic fields (B0 and B1 field) by the complexity of the cerebellum structure. Thus, this study tried to more exactly analyze the metabolism of a canine cerebellum using the cell extraction and high resolution NMRS. In order to conduct the absolute metabolic quantification in a canine cerebellum, the spectrum of our phantom included in various brain metabolites (i.e., NAA, Cr, Cho, Ins, Lac, GABA, Glu, Gln, Tau and Ala) was obtained. The canine cerebellum tissue was extracted using the methanol-chloroform water extraction (M/C extraction) and one group was filtered and the other group was not under extract processing. Finally, NMRS of a phantom solution and two extract solution (90% D2O) was progressed using a 500MHz (11.4 T) NMR machine. Filtering a solution of the tissue extract increased the signal to noise ratio (SNR). The metabolic concentrations of a canine cerebellum were more close to rat’s metabolic concentration than human’s metabolic concentration. The present study demonstrates the absolute quantification technique in vitro high resolution NMRS with tissue extraction as the method to accurately measure metabolite concentration.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.40 no.6
• /
• pp.747-756
• /
• 1995

To find out the optimum application method of slow-releasing fertilizer(SRF) and conventional fertilizer(CF) with different fertilization rate under two culture methods[l0-day old seedling machine transplanting(MT) and direct-sowing on dry paddy(DS)] in the south-western region(clay loam soil) of Korea, used were Chosun slow-releasing fertilizer(silicate latex coated fertilizer: N-P$_2$O$_{5}$-K$_2$O =18-12-13) and conventional fertilizer. Plant height and number of tillers with different two culture methods were higher at MT than DS in early growth. The ratio of dry weight in heading stage was higher at CF than SRF in MT than DS and especially, SRF 80% + CF 20% than SRF 100% or CF 100%. Leaf area index (LAI) in heading stage was higher at CF in MT but higher at SRF in DS than their counterparts. Chlorophyll content was higher at SRF than in CF expect for heading stage(HS), especially in DS. It was highest at HS in CF without its difference during maximum tillering stage(MTS) and panicle formation stage(PFS), while highest at PFS in SRF with tendency of gradual increase and decrease before and after PFS, respectively. Heading was delayed 2~3 days at SRF in two cultrue methods and 4~5 days at SRF in DS in comparison with CF in MT with delay of 2 days at DS compared with MT. Culm length was longer at CF in MT and at SRF in DS than their counterparts. Panicle number per m was more at SRF and in DS. Filled grain ratio was higher at CF and in MT. Yield was obtained 101 and 100% at 100% and 80% level of SRF in DS respectively, and 96% at 80% level of CF in MT, compared with conventional application method (516kg /l0a), and increased 2~4% at DS and 0~3% at MT in SRF. Yield was high in order of 100%(SRF) =80%(SRF) + 20%(CF) > 100%(SRF) + 20%(CF) > 80%(SRF) at MT and 80%(SRF) + 20%(CF) =100%(SRF) > 80%(SRF) =100%(SRF) + 20%(CF) at DS.

• Journal of Yeungnam Medical Science
• /
• v.8 no.2
• /
• pp.174-184
• /
• 1991

To determine the incidence rate of accidents and its associated factors, a prospective survey was carried out in a rural area of a total of 1,360 residents for 1 year from January 1 to December 31, 1988 in Shin-am Ri, Jungdong Myun, Sangju Kun, Kyungpook Province. Data for accidents were collected by the community health practitioner who is working at Primary Health Post in Shin-am Ri. A total number of accident cases was 85 among 1,360 persons during one year study period, and annual incidence rate was 62.5 per 1,000 persons. The highest incidence rate of accident was observed in the age group of 30-39 was 179.8. The incidence rate of accident in male was 86.5 which was about 2 times that in female. In male, the highest incidence rate was seen in 30-39 age group and in female, 60-69 age group. The highest incidence rate of accident was observed in spring(29.4%) and summer(29.4%), and the lowest in fall(17.7%). The highest incidence rate of accident was observed in Friday(24.5%) by day of week, and between 9 a.m. to 12 a.m. by time zone. The most frequent use of medical facilities was Primary Health Post(51.8%) and the next was clinic(38.8%). Mean duration of treatment was 9.8 days. The accident occured in the room and kitchen(23.5%), in the yard and barn(23.5%), on the road(22.4%). and in the rice field and dry field(20.0%). The causes of accident were motor vehicle accident(20.0%), piercing or cutting(20.0%), collision or fighting(12.9%), and poisoning(11.8%) in order of frequency. The most common type of injury was open wound which was 43.5%. The most common tool of accident was farm machine which was 23.5%. The most common injuried part of body was extremity(55.3%).

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.25 no.6
• /
• pp.583-603
• /
• 2023

Recently, the advancement of mechanical tunnel boring machine (TBM) technology and the characteristics of subsea railway tunnels subjected to hydrostatic pressure have led to the widespread application of shield TBM methods in the design and construction of subsea railway tunnels. Subsea railway tunnels are exposed in a constant pore water pressure and are influenced by the amplification of seismic waves during earthquake. In particular, seismic loads acting on subsea railway tunnels under various ground conditions such as soft ground, soft soil-rock composite ground, and fractured zones can cause significant changes in tunnel displacement and stress, thereby affecting tunnel safety. Additionally, the dynamic response of the ground and tunnel varies based on seismic load parameters such as frequency characteristics, seismic waveform, and peak acceleration, adding complexity to the behavior of the ground-tunnel structure system. In this study, a finite difference method is employed to model the entire ground-tunnel structure system, considering hydrostatic pressure, for the investigation of dynamic behavior of subsea railway tunnel during earthquake. Since the key factors influencing the dynamic behavior during seismic events are ground conditions and seismic waves, six analysis cases are established based on virtual ground conditions: Case-1 with weathered soil, Case-2 with hard rock, Case-3 with a composite ground of soil and hard rock in the tunnel longitudinal direction, Case-4 with the tunnel passing through a narrow fault zone, Case-5 with a composite ground of soft soil and hard rock in the tunnel longitudinal direction, and Case-6 with the tunnel passing through a wide fractured zone. As a result, horizontal displacements due to earthquakes tend to increase with an increase in ground stiffness, however, the displacements tend to be restrained due to the confining effects of the ground and the rigid shield segments. On the contrary, peak compressive stress of segment significantly increases with weaker ground stiffness and the effects of displacement restrain contribute the increase of peak compressive stress of segment.

• Restorative Dentistry and Endodontics
• /
• v.34 no.4
• /
• pp.350-355
• /
• 2009

Bond strength depends on characteristics of bonding surface and restorative technique. The majority of studies dealing with dentin bond strength were carried out on flat bonding surface, therefore, difference of bond strength between axial wall and pulpal wall is not clear yet. This study evaluated bonding difference between cavity walls in class I composite resin restoration with different filling techniques. Twenty extracted caries-free human third molars were used. Cavities were prepared in 6 ${\times}$4 ${\times}$3 mm box-type and divided into four groups according to filling technique and bonding surface: Group I; bulk filling - pulpal wall, Group II; bulk filling - axial wall, Group III; incremental filling - pulpal wall, Group IV; incremental filling - axial wall. Cavities were filled with Filtek $Z250^{(R)}$(3M/ESPE., USA) and Clearfill SE $bond^{(R)}$(Kuraray, Japan). After 24 hour-storage in $37^{\circ}C$water, the resin bonded teeth were sectioned bucco-lingualy at the center of cavity. Specimens were vertically sectioned into 1.0 ${\times}$1.0 mm thick serial sticks perpendicular to the bond surface using a low-speed diamond saw (Accutom 50, Struers, Copenhagen, Denmark) under water cooling. The trimmed specimens were then attached to the testing device and in turn, was placed in a universal testing machine (EZ test, Shimadzu Co., Kyoto, Japan) for micro-tensile testing at a cross-head speed of 1 mm/min. The results obtained were statistically analyzed using 2-way ANOVA and t-test at a significance level of 95%. The results were as follows: 1. There was no significant difference between bulk filling and incremental filling. 2. There was no significant difference between pulpal wall and axial wall, either. Within the limit of this study, it was concluded that microtensile bond strength was not affected by the filling technique and the site of cavity walls.