• 한국정밀공학회지
• /
• 제24권1호
• /
• pp.7-13
• /
• 2007

• 기술혁신연구
• /
• 제14권1호
• /
• pp.147-175
• /
• 2006

One of the biggest problems of Korean economy is polarization of firms for export and domestic demand and that of conglomerates and SME's achievement. One of the culprits lies weakness of intermediate industry such as machine tool. Since intermediate industry is important path where export performance affects domestic demand and whose actor usually is SMEs with high spill over effect in labor market. Especially, intermediate industry Is vulnerable because of industrial policy biased In backward linkage effect. However if a country fails to develop intermediate industry above some critical point, that country would fall in low-tech equilibrium without growth. In case of benign circle where final goods industry growth leads growth of intermediate industry and again it leads that of final goods industry, it can reach high-tech equilibrium. By contrast, in opposite case where in industrialization latecomer fails to link industries likewise above some critical point that country would fall in low-tech equilibrium without growth. Moreover, for several reasons, machine tool firms of Korea have difficulty in catching up technology above critical point. Firstly. Conglomerate demander neglects their product. Secondly, even after success of development overcoming difficulties they fail to get market share for response of dumping of foreign competitors. And the last one is patent litigation of foreign competitors that incapacitate the technology development. For these, Korean machine tool firms fell in 'middle-income country trap' itself, since they stuck in some extent when they technologically catch up. Consequently, for latecomer country in machine tool industry to leapfrog meaningfully policy support is necessary, Weak intermediate industry does not Induce domestic firms and remained fragile. Therefore, localization, policy should reflect condition of technological catch up more than before, in order to be effective and fruitful. There should be turning point over relationship between conglomerates, major demander of machine tool and SME's, for only with active purchasing of conglomerate Korean machine industry can grow.

• 한국안전학회지
• /
• 제37권4호
• /
• pp.1-10
• /
• 2022

The purposes of this study were to suggest 1) a future direction for Korea's machine tool industry and 2) how to secure the safety and reliability of emerging intelligent or automated machine tooling. The study concludes that, overseas, the machine tool industry is growing again while promoting innovation by converging with ICT. Accordingly, Korea also promotes ICT innovation to advance the machine tool industry, which is at the core of the national economy. As a result, unlike in the past, the frequency of serious injuries like entrapment accidents has recently decreased, while the proportion of collision accidents has increased. In addition, a new type of accident has become possible. Since ICT is network-based, the distinction between work and rest can become ambiguous; there is a risk of hacking, working hours and places are flexible and there are risk factors for diseases like chronic fatigue due to overload of specific personnel. As robots and automation are introduced, there is also a high probability of problems caused by physical and psychological burdens on system operators and resulting fatigue.

• 한국산업융합학회 논문집
• /
• 제27권2_2호
• /
• pp.415-424
• /
• 2024

This study analyzes trends and characteristics of the machine tool remanufacturing industry and proposes a standard process that considers environmental impact assessment during the remanufacturing process. First, trends in remanufacturing and environmental regulations are reviewed. And the current status of the machine tool remanufacturing industry and cases of national R&D projects related to machine tools are analyzed. Machine tool remanufacturing has a high resource saving effect, and remanufacturing is carried out as a finished product rather than as a part. And the scope of remanufacturing work is very wide due to the performance improvement of the machine and the addition of features. In order for the machine tool remanufacturing industry to be competitive, it is necessary to create products with high added value. In addition, in order to respond to international environmental regulations, it is necessary to secure related data by conducting an environmental impact assessment together during remanufacturing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.137-140
• /
• 2003

Recently, as the demand of small-sized precision parts is rising in precision industry such as mobile, automobile, optic. etc. the requirement of small-sized machine tool is increasing. Desktop machine tool define small-sized machine tool that is able to install in table. According to diminishing in size, Desktop machine tool is able to economize production cost by reducing work area and consuming electric power. But Desktop machine tool generates vibration in acceleration and deceleration modes by inertia force of moving part. Also vibration is generated when it move simultaneously two axis or three axis. Such generating vibration situation is reason of declining stiffness of machine tool structure because of smallizing in size. And this vibration has a large effect on precision of machining products. Therefore, evaluating of the control characteristic is necessary for minimizing vibration of machine tool as much as possible to accomplish precision machining of small-sized parts

• 한국산업융합학회 논문집
• /
• 제17권3호
• /
• pp.84-92
• /
• 2014

In this paper, a novel 5-axis hybrid-kinematic machine tool is introduced and the research results on accuracy improvement of the prototype machine tool are presented. The 5-axis hybrid machine tool is made up of a 3-DOF parallel manipulator and a 2-DOF serial one connected in series. The machine tool maintains high ratio of stiffness to mass due to the parallel structure and high orientation capability due to the serial-type wrist. In order to acquire high accuracy, the methodology of measuring the output shafts by additional sensors instead of using encoder outputs at the motor shafts is proposed. In the kinematic view point, the hybrid manipulator reduces to a serial one, if the passive joints in the U-P serial chain at the center of the parallel manipulator are directly measured by additional sensors. Using the method of successive screw displacements, the kinematic error model is derived. Since a ball-bar is less expensive than a full position measurement device and sufficiently accurate for calibration, the kinematic calibration method of using a ball-bar is presented. The effectiveness of the calibration method has been verified through the simulations. Finally, the calibration experiment shows that the position accuracy of the prototype machine tool has been improved from 153 to $86{\mu}m$.

• 한국산학기술학회논문지
• /
• 제2권1호
• /
• pp.19-30
• /
• 2001

공작기계는 산업발전의 기초가 되며 그 나라 기술수준을 반영하는 디자인 가공, 제어, 조립 등과 같은 분야에서 고도의 기술력을 요구하기 때문에 기계류 부품의 생산성 향상 및 품질향상에 큰 영향을 주게된다. 그러나, 국내업체의 경우 능숙한 기술자나 공작기계 개발을 위한 충분한 자본의 확보가 어려워 선진 공작기계 제조업체와의 기술적 차이를 극복하기가 어려운 실정이다. 따라서, 이 논문은 국내의 공작기계 업체가 안고있는 문제점들을 인식하고 국제 경쟁력의 향상을 위해서 국·내외 공작기계 회사의 현 상태 및 연구경향 등을 조사하여 국내 공작기계 업체를 지원하기 위한 국가차원에서의 종합적인 연구개발과제를 도출하고자 한다.

• 한국산업융합학회 논문집
• /
• 제22권6호
• /
• pp.627-635
• /
• 2019

In this study, we developed for processing complex features using CAM software that satisfies precision for example practice and related qualification tests suiTable for CNC training purposes. In addition, functions such as location control, speed control, and processing path generation, which are the main functions of CNC machining machines, were constructed using small equipment parts, servo motors, inverters, general purpose PCs, and commercial NC software and researched with the goal of developing low-cost education equipment. In the static accuracy inspection, the degree of machine when measuring the parallelism of the X, Y and Z axes and the vibration of the main shaft did not reach the allowable value. However, we have obtained a finished product that satisfies the CNC machine book sample shape machining, detailed functions of the position control function of the CNC machine tool, linear interpolation function, circular interpolation function, and tool offset function. In the qualification test shape processing, a shape with a degree of 1/100 mm was processed to obtain position accuracy that satisfied the tolerance.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2002년도 추계학술대회 논문집
• /
• pp.36-40
• /
• 2002

The development of feed drive system with high speed and accuracy has been a major issue in the machine tool industry. Linear motors can be used as the efficient tool to achieve fast feed mechanism and high accuracy. However. a high speed feed drive system with linear motors can generate heat problems such as the variation of temperature distribution and the resultant thermal stress. In this paper, the important heat sources and the resultant thermal errors are presented. The thermal deformation characteristics of the machine tool with linear motors were identified, which are thermal expansion of linear scale, shrinkage, expansion and bending in the machine tool structure.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집C
• /
• pp.189-196
• /
• 2001

Machine tools of high-speed and high-precision are required for various fields of industry such as semiconductor, automobile, mold fabrication and so on. Light-weight machine tool structure is essential for reduction of production time through rapid transportation. Also, high damping capacity of the structure is required to obtain precise products without vibration during manufacturing. Composite materials have high potential for machine tool structures due to its high specific stiffness and good damping characteristics. In this study, the design and the manufacture of a hybrid machine tool structure using composite materials was attempted and the damping capacity was investigated experimentally.