• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1613-1618
• /
• 2011

Analysis method for mechanism has been fully developed and relatively easy work compared to mechanism synthesis. Developing or creating a new mechanism for a given task is a creative job. In this case, a few theories are developed such as type synthesis. However, these methods are not sufficient for mechanism designers to sufficientely take into account alternative mechanism models during the initial phase of the mechanism design process. This paper presents the configuration design of mechanisms using graphical representation in the conceptual design stage. In this stage of kinematic synthesis, one needs to select mechanisms and configure appropriately to realize the desired motion of a machine. Graphical representation of mechanisms is proposed in this paper to help a designer to be highly creative and efficient in the initial design process. It is possible to easily design and analyze the mechanism of a machine by using this method.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.398-403
• /
• 2000

The design of multi-stage gear drives is a time-consuming process that includes additional design problems, which are not considered in the design of single-stage gear drives. In the previous research works, the authors have proposed a new algorithm to design multi-stage gear drives at the preliminary design phase. The proposed design algorithm automates the design process by integrating the dimensional design and the configuration design process. In the configuration design process, the positions of gears and shafts are determined by minimizing the geometrical volume (size) of a gearbox. However, various types of spatial constraints should be satisfied in practical design situation. To locate input and output shaft in specified positions is the typical example of such problems. In this paper, the authors show the formulations of spatial constraints applied to the design of four-stage gear drives. The design solution shows considerably good results, and the design system is confirmed to be readily applicable to practical design situation.

• Journal of Korean Institute of Industrial Engineers
• /
• v.15 no.1
• /
• pp.105-116
• /
• 1989

This study presents an algorithm that determines the optimal configuration of the FMSs with limited local buffers. The algorithm finds the lowest cost configuration, i.e. the number of tools, the number of pallets as well as the number of buffers to be installed in front of each machine in the system. Thus it assures a given production ratio with a minimum cost. In the algorithm, FMSs are considered as the closed queueing network with limited queue length. System performance evaluation is performed using the Block-&-Recirculation model developed by Yao and Buzacott. The algorithm is composed with three steps. The steps are namely i) determination of a lower configuration, ii) derivation of an heuristic solution, and iii) obtaining the optimal solution. The computational efforts required in the algorithm usually lies within the capability of personal computers.

• Journal of international Conference on Electrical Machines and Systems
• /
• v.1 no.4
• /
• pp.505-508
• /
• 2012

A permanent magnet flux switching (PMFS) machine has a simple rotor, whilst both magnets and coils are set in the stator, resulting in easy removal of heat due to both copper loss and eddy current loss in magnets. However, the volume of magnets used in PMFS machines is usually larger than in conventional PM machines, and leakage flux does exist at the non-airgap side. To make full use of the magnets and gain higher power density, a novel 3-dimensional (3D) field PMFS machine is developed. It combines merits of the tubular linear machine, external-rotor rotary machine and axial-flux rotary machine, hence, offers high power density and peak torque capability, as well as efficient utility of magnets owing to the unique configuration of triple airgap fields.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.15 no.1
• /
• pp.39-48
• /
• 2006

In this paper, polymer composites based sandwich structures like beams and plates are optimised by using parametric study. The structures are composed of fibre reinforced composites for facial material and resin concrete and PVC foam for core materials. The stacking sequences and thickness of the composites are controlled as major parameters to find out the optimal condition for machine tool components. For the plate structure of machine tool bed composites-skined sandwich structure which has several ribs are proposed to enhance bending stiffnesses in two major directions at the same time. Dynamic robustness of a machine tool structure is investigated using modal analysis. From the results optimal configuration and materials for high precesion machine tools are proposed. And the plate was made of fiber reforced composite material and PVC foam.

• Journal of Korean Institute of Industrial Engineers
• /
• v.29 no.3
• /
• pp.230-238
• /
• 2003

The configuration design of a mechanical product can be efficiently performed when it is based on the functional modeling. There are methodologies, which decompose function from the abstract level to the concrete level and match the functions to physical parts. But it is difficult to carry out an innovative design when the function is matched only to a pre-detined part. This paper describes the configuration design process of a mechanical product with a design expert system, which uses function taxonomy and TRIZ theory. The expert system can propose a functional modeling of a new part. which is not in the existing parts list. The abstraction levels of design knowledge are introduced, which describe the operation of mechanical product in the levels of abstraction. This is the theoretical background of using knowledge of function and TRIZ for configuration design. The expert system is adequate to control this design knowledge. which expresses knowledge of functional modeling, mapping rules between functions and parts, selection of parts, and TRIZ theory. The hierarchy of functions and machine parts are properly expressed by classes and objects in the expert system. A design expert system has been implemented for the configuration design of a train bogie, and a new brake system of the bogie is introduced with the aid of TRIZ's 30 function groups.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.15 no.8
• /
• pp.2783-2804
• /
• 2021

In the network function virtualization environment, dynamic changes in network traffic will lead to the dynamic changes of service function chain resource demand, which entails timely dynamic adjustment of service function chain resource configuration. At present, most researches solve this problem through virtual network function migration and link rerouting, and there exist some problems such as long service interruption time, excessive network operation cost and high penalty. This paper proposes a dynamic adjustment method of service function chain resource configuration for the dynamic changes of network traffic. First, a dynamic adjustment request of service function chain is generated according to the prediction of network traffic. Second, a dynamic adjustment strategy of service function chain resource configuration is determined according to substrate network resources. Finally, the resource configuration of a service function chain is pre-adjusted according to the dynamic adjustment strategy. Virtual network functions combination and virtual machine reusing are fully considered in this process. The experimental results show that this method can reduce the influence of service function chain resource configuration dynamic adjustment on quality of service, reduce network operation cost and improve the revenue of service providers.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2396-2398
• /
• 1998

The Distribution Automation System(DAS) Master Station(MS) is the core of the system, which has the functions of supervising, data acquisition, processing and man-machine interface. In this paper, we suggested the optimal configuration of the medium/small scale DAS MS in accordance with the consideration of various requirements such as reliability, scalability flexibility, etc.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.7
• /
• pp.2649-2666
• /
• 2015

In the dynamic cloud computing environment, to ensure, under the terms of service-level agreements, the maximum efficiency of resource utilization, it is necessary to investigate the online dynamic management of virtual machine resources and their operational application systems/components. In this study, the feasibility and properties of the division of virtual machine resources on the cloud platform, using the virtual machine cluster as the management unit, are investigated. First, the definitions of virtual machine clusters are compared, and our own definitions are presented. Then, the feasibility of division using the virtual machine cluster as the management unit is described, and the isomorphism and reconfigurability of the clusters are proven. Lastly, from the perspectives of clustering and cluster segmentation, the dynamics of virtual machines are described and experimentally compared. This study aims to provide novel methods and approaches to the optimization management of virtual machine resources and the optimization configuration of the parameters of virtual machine resources and their application systems/components in large-scale cloud computing environments.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.10
• /
• pp.4694-4699
• /
• 2013

In this paper, a high pressure cleaning machine in field was disassembled and measured in order to develop a highly improved pressure cleaner in performance and real configuration was modeled by using 3-D design program CATA V5. In addition, fluid analysis was conducted on the modeled high pressure cleaning machine by using ANSYS finite element analysis program and visualize the pressure changes of internal fluid flow was visualized. This result will be applied to a new designed high pressure cleaning machine in future.