• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.423-427
• /
• 2003

In this paper, it is to development of brake system with ABS function for aircraft. The test of brake system is required before applying on aircraft. The real-time dynamic simulator with 5-D.O.F. aircraft dynamic model is developed for braking performance test of ABS (Anti-skid Brake System) control h/w with anti-skid brake functions. The dynamic simulator is real-time interface system that is composed of dynamic simulation parts, master control parts, digital and analog in/out interface parts, and user interface parts. The 5-D.O.F. aircraft dynamic model is composed of a big contour and a little contour by simulation s/w. The big contour represents the interactions of forces in airframe, nose and main landing gear, and engines on the center of gravity. The little contour represents interactions of wheel, braking units, hydraulic units and a control unit. ABS control h/w unit with ABS control algorithm is also developed and is tested with simulator under the some conditions of gripping coefficient. We have known that ABS control h/w unit on wet or snowy runway as well as dry runway very well protects wheel skid.

• Journal of Power System Engineering
• /
• v.17 no.6
• /
• pp.130-135
• /
• 2013

It is a research about the change in reduction efficiency and performance resulting from installation of the EGR cooler, which is the core technology reducing NOx in response to standards been tightened of exhaust controls for off-road vehicle. It can reduce NOx by altering combustion temperature and oxygen concentration by recycling high-temperature exhaust gas. The target engine was large diesel engine for construction machine through by which we were able to verify a rate of change in output and capabilities for a heat-exchange within cooler itself depending on the existence of EGR cooler system. We have acquired a emission reduction technology for a construction machine by testing the reduction performance and rate of change in output.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.17 no.1
• /
• pp.52-57
• /
• 2007

This paper presents the design of intelligent moving machine control system using a real time speech recognition. The proposed moving machine control system is composed of four separated module, which are main control module, speech recognition module, servo motor driving module and sensor module. In main control module with microprocessor(80C196KC), one part of the artificial intelligences, fuzzy logic, was applied to the proposed intelligent control system. In order to improve the non-linear characteristic which depend on an user's weight and variable environment, encoder attached to the servo motors was used for feedback control. The proposed system is tested using 9 words lot control of the mobile robot, and the performance of a mobile robot using voice and joystick command is also evaluated.

• Korean Journal of Computational Design and Engineering
• /
• v.5 no.2
• /
• pp.127-135
• /
• 2000

Emergent computing paradigms such as genetic algorithms have found increased use in problems in engineering design. These computational tools have been shown to be applicable in the solution of generically difficult design optimization problems characterized by nonconvexities in the design space and the presence of discrete and integer design variables. Another aspect of these computational paradigms that have been lumped under the bread subject category of soft computing, is the domain of artificial intelligence, knowledge-based expert system, and machine learning. The paper explores a machine learning paradigm referred to as teaming classifier systems to construct the high-quality global function approximations between the design variables and a response function for subsequent use in design optimization. A classifier system is a machine teaming system which learns syntactically simple string rules, called classifiers for guiding the system's performance in an arbitrary environment. The capability of a learning classifier system facilitates the adaptive selection of the optimal number of training data according to the noise and multimodality in the design space of interest. The present study used the polynomial based response surface as global function approximation tools and showed its effectiveness in the improvement on the approximation performance.

• Journal of Power System Engineering
• /
• v.21 no.2
• /
• pp.77-82
• /
• 2017

In the fishing boat, freshwater ice is loaded on the fishroom in advance and it is used for storage of fishes. However, it causes degradation of catches' freshness. Therefore, seawater ice machine on board is necessary for the fishing industry. In this study, seawater ice machine with drum type evaporator was manufactured, and the system was tested under various operating conditions having an influence on the COP and amount of ice produced. The main results are as follow : The COP of the system gets larger when the evaporation temperature and rotation speed of the drum in the evaporator increases. The most effective refrigerant is R22 and the value of the COP was 1.43 times higher than that of R404A. The amount of produced ice increases with respect to increment of the evaporation temperature, while that decreases with respect to increment of the evaporator drum rotation speed.

• Proceedings of the Korean Society for Language and Information Conference
• /
• 2007.11a
• /
• pp.105-114
• /
• 2007

This paper addresses a method for customizing an English-to-Korean machine translation system from general domain to patent domain. The customizing method consists of following steps: 1) linguistically studying about characteristics of patent documents, 2) extracting unknown words from large patent documents and constructing large bilingual terminology, 3) extracting and constructing the patent-specific translation patterns 4) customizing the translation engine modules of the existing general MT system according to linguistic study about characteristics of patent documents, and 5) evaluating the accuracy of translation modules and the translation quality. This research was performed under the auspices of the MIC (Ministry of Information and Communication) of Korean government during 2005-2006. The translation accuracy of the customized English-Korean patent translation system is 82.43% on the average in 5 patent fields (machinery, electronics, chemistry, medicine and computer) according to the evaluation of 7 professional human translators. In 2006, the patent MT system started an on-line patent MT service in IPAC (International Patent Assistance Center) under MOCIE (Ministry of Commerce, Industry and Energy) in Korea. In 2007, KIPO (Korean Intellectual Property Office) tries to launch an English-Korean patent MT service.

• Proceedings of the KIEE Conference
• /
• 2002.07d
• /
• pp.2325-2327
• /
• 2002

포항 가속기연구소(PAL)에서는 포항방사광가속기(PLS)가 가동을 시작한 1994년 이후 현재까지 사용되어 온 기존의 제어 시스템을 새로운 환경인 EPICS(Experimental Physics and Industrial Control System) 시스템으로 개발하고 있다. EPICS 시스템의 구성은 IOC(Input/Ouput Controller) 와 OPI(Operator Interface)의 2-Layer로 구성되며 이는 MIU(Machine Interfaces Unit), SCC(Subsystem Computer Control System) 그리고 HMI(Human Machine Interface)로 이어지는 기존의 3-Layer 단계 중 SCC단계를 줄여 2-Layer로 구성된다. 이들 두 계층간의 통신은 Client(OPI)/Server(IOC) 구조의 Channel Access를 통해서 이루어진다. 개발중인 EPICS 시스템은 Open Architecture 구조로 IOC와 OPI 각 부분에서 개발시에 사용된 운영체제나 Hardware 를 사용하지 않고 다른 운영체제나 Hardware를 사용하더라도 하나의 공통부분 즉, Channel Access만 있으면 이를 통해 서로 다른 Subsystem IOC의 데이터를 Access할 수 있다. 전체 EPICS 제어시스템 중 저장링 운전의 핵심이 되는 BPM(Beam Position Monitoring) 및 MPS(Magnet Power Supply) 시스템은 IOC부분에 MVME5100(Target Machine) 보드와 vxWorks(Operating System)를 이용하고 OPI부분에는 SUN Workstation(Host Machine)와 Solaris(Operating System)을 사용하여 개발하고 있다. 본 논문에서는 IOC 및 OPI의 설치 절차와 설치 방법에 대해 기술하였다.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.2
• /
• pp.473-483
• /
• 1999

We introduce a way to construct a supercomputing capable system with some networked PCs, running the Linux operating system and computing power comparable with expensive commercial workstations, and with the Parallel Virtual Machine (PVM) software which enables one to control the total CPUs and memories of the networked PCs. By benchmarking the system using a PVM parallel program, we find that the system's parallel efficiency is close to 90 %.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.154-162
• /
• 2006

By laying its drum horizontally, front-loaded washing machine mostly used in Europe that uses the head of the water to launder was appropriate for washing only small amount of laundry. However, the demands of customers are requiring front-loaded washing machine to handle big capacity laundry as well, and have faster rotation speed to increase drying ability. To meet such demands, more stress from bending and twisting are complexly loaded onto the shaft supporting the horizontal drum, causing problems in fracture strength and fatigue life. Shafting system is mainly divided into flange and shaft. Flange is located between the drum and shaft, transferring power from the shaft to drum, and acting as a supporter of the back of the drum. Shaft is connected from the flange to insert production, transferring power from the motor to drum, and mainly acting as stiffness against the horizontal weight of the shafting system. In this paper, strength analysis and experiment were executed on both the shaft and flange of front-loaded washing machine to suggest the design improvement of shafting system for big capacity, high-rotation drying. Also, verification of this evaluation was executed on fracture strength and fatigue life for studied shaft system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.11 no.11
• /
• pp.4145-4150
• /
• 2010

This research aims to design on an automatic machine vision system to replace eye inspection of alternator spool which is one of the key automotive parts. The alternator spool, plastic extrusion part would have various defects like unfinished, crack and burr. Through the design failure examples the optimized fast machine vision system will be designed to inspect all spools also focuses on the low cost machine for the middle sized company as 2'nd automotive supplier. 3-dimensional design softwares of Pro-Engineer & CATIA were used and the system were built based on the design. The system will contribute to satisfy the cycle time and can inspect each part in an absolutely accurate method, which is sufficient for industrial applications.