• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.17-31
• /
• 1982

A physician assumes toward his patient the obligation to use such reasonable care and skill as is commonly possessed and exercised by physicians in the same general line of practice in the same or similar localities and to use his best judgment at the times. Medical disputes between physicians and patients are, ever more increased in these days as human body, happens to cause a variety of changes in body unlike the function of machine. Such increased trends of medical disputes became a problem in common across the word under the influence of affluent living standard, high consciousness of life value and right by today's people. The aim of this dissertation is oriented to forming a physician's responsibilities in medicalcare accidents arising between physicians and patients. A general physician, for example, has not been negligent merely because, a specialist might have treated the patient with greater skill and knowledge. However, the fact that a physician may have acted to the best of his ability will not avoid legal problems for damages resulting from substandard treatment, that is the degree of care and skill which is to be expected of the ordinary practitioner in his field of practice. The duty of a physician who is, or holds himself out to be, a specialist is greater in the field of his specialty than one who is a general physician. A patient's consent to routine medical procedures is implied from the fact that patient comes to the physician with a medical problem and voluntarily submits to the procedures. For the more serious medical procedures and for major operations, however, it is preferable for the physician to have the patient's consent in writing, to facilitate proof of the consent in the event of a dispute or litigation. Suppose that mistakes on the part of physicians are likely to be blamed in all cases of malpractice. Then it will create a sort of shrinkage in activities of medical treatment. There should be some limitation on excessive application of 'The thing speaks for itself' on mistakes by physicians and availablity of cause and effect. It is a matter of complicity as well as a matter of importance to draw a definite boundary on responsibilities of physician. A series of further research on this particular aspect is strongly urged.

• The KIPS Transactions:PartB
• /
• v.11B no.1
• /
• pp.71-76
• /
• 2004

The recent ERP and CRM is mostly focused on the conventional function performances. However, the recent business environment has brought the change in market due to the rapid progress of internet and e-commerce. It is mostly becoming e-business and spreading out as development of the relationship with other cooperating companies, the rapid progress of the relationship with customers, and intensification competitive power through the development of business progress in the organization. CRM(custom relationship management) is a kind of the marketing progress which forms, manages, and intensifies the relationship between the customers and companies to manage the acquired customers and increase the worth of customers for the company. It needs the system base which analyzes the information of customers since it functions on the basis of various information about customers and is linked to the business category such as producing, marketing, and decision making. Since ERP is extending its function to SCM, CRM, and SEM(strategic Enterprise Management), the 21 century s ERP develop as the strategy tool of e-business and, as the mediation for this, will subdivide the functions of CRM effectively by the analogic study of data. Also, to accomplish classification work of the file which in existing becomes accomplished with possibility work with an automatic movement with the user will be able to accomplish a more efficiently work the agent which in order leads the machine studying law, it is one thing with system feature.

• The KIPS Transactions:PartD
• /
• v.8D no.4
• /
• pp.347-360
• /
• 2001

The most expensive spatial operation in spatial databases is a spatial join which computes a combined table of which tuple consists of two tuples of the two tables satisfying a spatial predicate. Although the execution time of sequential processing of a spatial join has been so far considerably improved, the response time is not tolerable because of not meeting the requirements of interactive users. It is usually appropriate to use parallel processing to improve the performance of spatial join processing. However, as the number of processors increases, the efficiency of each processor decreases rapidly because of the disk bottleneck and the overhead of message passing. This paper proposes the method of task allocation to soften the disk bottleneck caused by accessing the shared disk at the same time, and to minimize message passing among processors. In order to evaluate the performance of the proposed method in terms of the number of disk accesses and message passing, we conduct experiments on the two kinds of parallel spatial join algorithms. The experimental tests on the MIMD parallel machine with shared disks show that the proposed semi-dynamic task allocation method outperforms the static and dynamic task allocation methods.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.12
• /
• pp.511-522
• /
• 2014

During the development of the software, a variety of bugs are reported. Several bug tracking systems, such as, Bugzilla, MantisBT, Trac, JIRA, are used to deal with reported bug information in many open source development projects. Bug reports in bug tracking system would be triaged to manage bugs and determine developer who is responsible for resolving the bug report. As the size of the software is increasingly growing and bug reports tend to be duplicated, bug triage becomes more and more complex and difficult. In this paper, we present an approach to assign bug reports to appropriate developers, which is a main part of bug triage task. At first, words which have been included the resolved bug reports are classified according to each developer. Second, words in newly bug reports are selected. After first and second steps, vectors whose items are the selected words are generated. At the third step, TF-IDF(Term frequency - Inverse document frequency) of the each selected words are computed, which is the weight value of each vector item. Finally, the developers are recommended based on the similarity between the developer's word vector and the vector of new bug report. We conducted an experiment on Eclipse JDT and CDT project to show the applicability of the proposed approach. We also compared the proposed approach with an existing study which is based on machine learning. The experimental results show that the proposed approach is superior to existing method.

• Journal of Sericultural and Entomological Science
• /
• v.16 no.2
• /
• pp.147-155
• /
• 1974

The purpose of this study is to find out influence of reeling conditions on the denier control of raw silk for automatic silk reeling machine. The results obtained are as follows： 1. Effect of groping end part temperature (X$_1$) (1) Average size Y＝0.02945X$_1$＋18.27 (2) Size range Y＝0.04224X$_1$＋2.99 (3) Size deviation Y＝0.01667X$_1$－0.13 (4) Maximum deviation of size Y＝0.04657X$_1$－0.929 (5) Quality of raw silk Y＝－0.07055X$_1$＋10.082. Effect of silk reeling bath temperature (X$_2$) (1) Average size Y＝0.0334X$_2$＋19.08 (2) Size range Y＝0.016X$_2$＋5.24 (3) Size deviation Y＝0.0014X$_2$＋1.05 (4) Maximum deviation of size Y＝0.0206X$_2$＋1.59 3. Effect of silk reeling velocity(X$_3$) (1) Size range Y＝0.01797X$_3$＋3.95 (2) Size deviation Y＝0.00327X$_3$＋0.845 (3) Maximum deviation of size Y＝0.00905X$_3$＋1.50 (4) Quality of raw silk Y＝－0.03232X$_3$＋8.62

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.4 no.3
• /
• pp.301-309
• /
• 2006

KDC-1 canister for PWR spent fuels which will be used for the Korean Reference Disposal System was developed. The structural analysis of the canister was carried out as a part of the safety analysis. Two conditions, disposal condition and handling condition, were considered for the structural analysis. Three kinds of load cases, normal, abnormal and rock movement, were considered for the disposal condition. The results of the calculation showed that the safety factors from the structural analysis were greater than the design requirements. Two accident scenarios, gripper failure accident and canister drop accident, were analyzed for the handling condition. According to the gripper failure scenario analysis, the handling machine with grippers could be used even in the cases that one or two grippers failed. The maximum von Mises stress from the canister drop accident scenario was 0.762 MPa, which was negligible compared with the yield stress of nodular cast iron. The proposed KDC-1 canister for PWR spent fuels proves to be safe under the repository condition that is based upon the Korean reference disposal system according to the structural analysis for disposal condition and handling condition.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.16 no.6
• /
• pp.599-614
• /
• 2014

When tunnelling with TBM (Tunnel Boring Machine), accessibility to tunnel face is very limited because tunnel face is mostly occupied by a bunch of machines. Existing techniques that can predict ground condition ahead of TBM tunnel are extremely limited. In this study, the TBM Resistivity Prediction (TRP) system has been developed for predicting anomalous zone ahead of tunnel face utilizing electrical resistivity. The applicability and prediction accuracy of the developed system has been verified by performing field tests at subway tunnel construction site in which an EPB (Earth Pressure Balanced) shield TBM was used for tunnelling work. The TRP system is able to predicts the location, thickness and electrical properties of anomalous zone by performing inverse analysis using measured resistivity of the ground. To make field tests possible, an apparatus was devised to attach electrode to tunnel face through the chamber. The electrode can be advanced from the chamber to the tunnel face to fully touch the ground in front of the tunnel face. In the 1st field test, none of the anomalous zone was predicted, because the rock around the tunnel face has the same resistivity and permittivity with the rock ahead of tunnel face. In the 2nd field test, 5 m thick anomalous zone was predicted with lower permittivity than that of the rock around the tunnel face. The test results match well with the ground condition predicted, respectively, from geophysical exploration, or directly obtained either from drilling boreholes or from daily observed muck condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.8
• /
• pp.26-35
• /
• 2020

Tunnel construction is an important part of Korean public construction projects. Although the development of various equipment and technologies has led to advances in tunnel construction methods that are implemented on sites, the cost standards related to such works do not yet reflect the realities of the construction sites. A literature review and site surveys were conducted to suggest reasonable cost standards for tunnel work that reflects the realities of the field. First, each item in the cost standards for tunnel work, as established in the Construction Standard Production Rates, were analyzed. The results were compared with the actual costs implemented on tunnel projects. The key items analyzed included those regarding the work cycle time, such as rock classification, profiling survey, drilling speed, and muck-disposal processing equipment combination, as well as the number of people put to tunneling work. Based on the site survey results, improved estimates regarding the cycle time per one tunnel drilling blast, drilling speed of the machine, muck disposal processing equipment combination, and the number of people put to tunneling work were suggested. This study suggests the cost standards that reflect the realities of tunneling sites. The results are expected to help ensure adequate costs for tunnel construction projects.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.3
• /
• pp.1585-1593
• /
• 2015

3D-structured (embossed) aluminum sheets have been used in the heat insulation purpose for automative exhaust parts because of increasing their surface areas and stiffness reinforcement imposed in making the embossing pattern. However, there are many restrictions in press forming of the embossed sheet compared with the flat sheet (non-embossed one) because of its difference in the mechanical properties and the geometrical 3-dimensional shape. In this paper we investigated the deformation characteristic of embossed aluminum sheet in the incremental sheet forming process which has frequently used in the design verification and the trial manufacturing of sheet products. The single point incremental forming (SPIF) experiments for the rectangular cone forming using the CNC machine with a chemical wood-machined die and a circular tool shape showed that the formability of the embossed sheet are better than that of the flat sheet in view of the maximum angle of cone forming. This comes from the fact that the embossed sheet between the tool and the elastic die wall is plastically compressed and the flatted area contributes to increase the plastic deformation. Also the tool path along the outward movement from the center showed a better formability than that of the inward movement from the edge. However the surface quality for the tool path along the outward movement evaluated from the surface deflection is inferior than that of the tool path along the inward movement.

• The KIPS Transactions:PartB
• /
• v.9B no.2
• /
• pp.139-146
• /
• 2002

The robot soccer simulation game is a dynamic multi-agent environment. In this paper we suggest a new reinforcement learning approach to each agent's dynamic positioning in such dynamic environment. Reinforcement learning is the machine learning in which an agent learns from indirect, delayed reward an optimal policy to choose sequences of actions that produce the greatest cumulative reward. Therefore the reinforcement learning is different from supervised learning in the sense that there is no presentation of input-output pairs as training examples. Furthermore, model-free reinforcement learning algorithms like Q-learning do not require defining or learning any models of the surrounding environment. Nevertheless these algorithms can learn the optimal policy if the agent can visit every state-action pair infinitely. However, the biggest problem of monolithic reinforcement learning is that its straightforward applications do not successfully scale up to more complex environments due to the intractable large space of states. In order to address this problem, we suggest Adaptive Mediation-based Modular Q-Learning (AMMQL) as an improvement of the existing Modular Q-Learning (MQL). While simple modular Q-learning combines the results from each learning module in a fixed way, AMMQL combines them in a more flexible way by assigning different weight to each module according to its contribution to rewards. Therefore in addition to resolving the problem of large state space effectively, AMMQL can show higher adaptability to environmental changes than pure MQL. In this paper we use the AMMQL algorithn as a learning method for dynamic positioning of the robot soccer agent, and implement a robot soccer agent system called Cogitoniks.