• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.148-149
• /
• 2000

파장분할다중(WDM) 광통신시스템에서 광원의 파장을 정확하게 측정하는 것은 매우 중요하다. 지금까지 광파장측정기는 격자나 Fabry-Perot 에탈론을 사용한 광대역 필터(optical bandpass filter) 및 파장에 따라 삽입손실이 다른 파장판별기(wavelength discriminator)등으로 구현되었지만 빛의 간섭 현상을 이용한 마이켈슨 간섭계가 가장 많이 사용되었다. 특히 푸리에 변환 마이켈슨 간섭계 파장측정기$^{(1)}$ 는 동시에 각각 다른 파장의 광원들이 입사되더라도 각각의 파장을 측정할 수 있는 장점이 있다. 즉 마이켈슨 간섭계에서 주기적인 간섭무늬에 의한 광검출기의 출력은 입력된 광파장에 따라 다른 주기를 가진다. 따라서 서로 다른 파장을 가진 빛이 입사했을 때 검출되는 각각의 광전력의 합을 표본화(sampling)한 뒤 FFT를 거치면 광파장과 광검출기로 수신한 신호의 중심 주파수의 관계를 알 수 있으므로, 서로 다른 파장을 가진 빛이 입사하더라도 각각의 파장을 측정할 수 있는 것이다. 본 논문에서는 푸리에 변환을 이용하되 마이켈슨 간섭계 대신 마하젠더 간섭계형 광변조기를 이용하여 광파장을 측정에 관한 실험적 구현과 개선 방안에 대해 제시한다. (중략)

• Korean Journal of Optics and Photonics
• /
• v.1 no.2
• /
• pp.125-129
• /
• 1990

One method for time-division multiplexing (TDM) of Michelson type fiber-optic interferometric sensor arrays is proposed and demonstrated experimentally. This method has some advantages; fewer fiber-optic components. low cost. and high reliability.bility.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.20-21
• /
• 2000

광을 기반으로 한 논리 연산은 전자 소자의 속도 한계 및 연산 용량의 한계를 극복할 대안으로 많은 관심을 끌고 있다. 초고속 전광 논리 연산의 구현은 대부분 물질의 비선형성을 이용하며 특히 광섬유의 비선형 Ken 효과를 이용한 Sagnac 간섭계의 형태를 이용한 논리 연산이 주로 연구되어 왔다$^{(1)}$ . 그러나 광섬유의 비선형성을 이용하기 위해서는 충분히 큰 광 강도가 필요하며 회로 구성에 있어서도 크기가 크다는 단점이 있다. 최근에는 반도체 광증폭기의 비선형 이득 포화 현상을 이용한 TOAD 등이 발표되어 상대적으로 크기도 감소하고 사용되는 광 강도 역시 감소시킬 수 있었다$^{(2)}$ . 간섭계를 이용한 광논리의 구현은 Sagnac 간섭계 뿐만 아니라 비선형 특성을 갖는 도파로로 구성된 Mach-Zehnder 간섭계, Michelson 간섭계 등도 이용이 가능하다. (중략)

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.16-17
• /
• 2003

지난 수년간 인터넷 보급에 따른 급격한 통신량 증가에 따른 요구는 차세대 통신 기술인 WDM을 구축하게 되었고 이에 따라 WDM 라우팅 기술과 스위칭 기술이 절실히 필요로 하게 되었다. WDM에 있어서 다른 경로나 목적지로 신호를 보내기 위해서는 신호의 파장이 변환 되어야 하므로 신호의 파장변환은 라우팅에 있어 핵심적인 기술 중 하나로 인식되어지고 있다 현재 사용되어지고 있는 전광 파장 변환기는 주로 SOA (Semiconductor Optical Amplifier)의 비선형 특성인 XGM, XPM, FWM등을 이용한 것으로서 편광 민감성, ASE에 의한 SNR 감소, 신호크기 변형과 높은 가격으로 인해 안정적인 파장변환기로 쓰기에는 다소 무리가 있다. (중략)

• Journal of the Optical Society of Korea
• /
• v.16 no.4
• /
• pp.354-364
• /
• 2012

In this paper, a new 2-step quadrature phase-shifting digital holographic optical encryption method using orthogonal polarization is proposed and tolerance errors for this method are analyzed. Unlike the conventional technique using a PZT mirror, the proposed optical setup comprises two input and output polarizers, and one ${\lambda}$/4-plate retarder. This method makes it easier to get a phase shift of ${\pi}$/2 without using a mechanically driven PZT device for phase-shifting and it simplifies the 2-step phase-shifting Mach-Zehnder interferometer setup for optical encryption. The decryption performance and tolerance error analysis for the proposed method are presented. Computer experiments show that the proposed method is an alternate candidate for 2-step quadrature phase-shifting digital holographic optical encryption applications.

• Journal of the Optical Society of Korea
• /
• v.12 no.4
• /
• pp.221-225
• /
• 2008

We propose a simple hydrogen detection scheme based on a Mach-Zehnder interferometer formed with a pair of palladium-coated long-period fiber gratings (LPGs). Since an LPG pair offered a fine-structured interference fringe in its transmission spectrum, the resolution as a sensor could be appreciably enhanced compared to that of a single LPG. As the palladium layer absorbed hydrogen, the effective refractive indices of the cladding modes were increased so that the interference spectrum was blue-shifted up to 2.3 nm with a wavelength sensitivity of -0.29 nm/min for 4% of hydrogen concentration.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.230-235
• /
• 2014

Two-step quadrature phase-shifting digital holography based on the calculated intensity of a reference wave is proposed. In the Mach-Zehnder interferometer (MZI) architecture, the method only records two quadrature-phase holograms, without reference-wave intensity or object-wave intensity measurement, to perform object recoding and reconstruction. When the reference-wave intensity is calculated from the 2D correlation coefficient (CC) method that we presented, the clear reconstruction image can be obtained by some specific algorithm. Its feasibility and validity were verified by a series of experiments with 2D objects and 3D objects. The presented method will be widely used in real-time or dynamic digital holography applications.

• Journal of the Optical Society of Korea
• /
• v.18 no.3
• /
• pp.288-291
• /
• 2014

This paper presents a new method for measuring the half-wave voltage $V_{\pi}$ of an electro-optic phase modulator based on a phase-modulated photonic link with interferometric demodulation. By using this method, the $V_{\pi}$ can be obtained with the RF voltage amplitude input required to achieve 1-dB gain compression of link and the differential delay of a Mach-Zehnder interferometer. We measure the $V_{\pi}$ of a commercial phase modulator by using the presented method and the carrier/the first sideband intensity ratio method. Furthermore, we compare the two measurements with the typical value provided by the manufacturer. The experiment shows that this novel measurement method is feasible, straightforward, and accurate.

• Current Optics and Photonics
• /
• v.2 no.5
• /
• pp.400-406
• /
• 2018

The Semiconductor Optical Amplifier (SOA)-based Mach-Zehnder interferometer is a major contributor in all-optical digital processing and optical computation. Optical tree architecture provides one of the new, alternative schemes for integrated all-optical arithmetic and logical operations. In this paper, we propose an all-optical 3-bit integrated parity generator and checker using SOA-MZI-based optical tree architecture. The proposed scheme, able to process input signals at a desired operating wavelength, has been characterized using RZ-modulated signals at 10 Gbps. The maximum extinction ratios achieved at the output of the parity generator and checker are 10 dB and 8 dB respectively.

• The Magazine of the Society of Air-Conditioning and Refrigerating Engineers of Korea
• /
• v.16 no.2
• /
• pp.204-215
• /
• 1987

Laminar natural convective heat transfer within a two-dimensional rectangular enclosure with horizontal conducting walls and partitions was investigated by numerical analysis and experiment. The enclosure consists of two isothermal vertical walls and two adiabatic horizontal walls. This combined heat transfer problem of conduction and natural convection was solved using finite difference method with SIMPLE algorithm, and temperature distribu-tions in the air filled enclosure was obtained using Mach-Zehnder interferometer. Good agree-ment was obtained between the predicted and measured results. The effect of geometric parameters and thermal properties on heat transfer was studied far Grashof numbers in range, $1\times10^4\;{\leqslant}\;G^r\;{\leqslant}\;6.4\times10^5.$ It was found that both velocity and temperature fields were in-fluenced significantly by thermal conductivity of the conducting walls and the partitions, and by geometry of partitions.