• The Journal of the Korean Society for Microbiology
• /
• v.21 no.3
• /
• pp.375-380
• /
• 1986

Thirty-one strains of Pseudomonas aeruginosa were submitted to the synergistic activity test of amikacin(AK) and gentamicin(GM) combined with moxalactam(MX), ceftizoxime(CTZ) or cefoperazone(CFZ). The minimal inhibitory concentrations(MICs) of each drug and drugs combined in various ratios were measured by checkerboard dilution method. The synergism was determined through analysing the MIC distribution curve on isobologram and calculating the fractional inhibitory concentration index(FICI). MICs of GM, AK, MX, CFZ and CTZ against the 31 tested strains were distributed from $12.5{\mu}g/ml$ to $800{\mu}g/ml$, from $0.8{\mu}g/ml$ to $25{\mu}g/ml$, from $3.1{\mu}g/ml$ to $50{\mu}g/ml$, from $3.1{\mu}g/ml$ to $400{\mu}g/ml$, and from $12.5{\mu}g/ml$ to $100{\mu}g/ml$, respectively. The rate synergism of each drug combination by means of FICl was 45.5% in GM-MX, 36.4% in GM-CFZ, 63.6% in GM-CTZ, 48.6% in AK-MX, 35.3% in AK-CFZ, and 35.7% in AK-CTZ combination. Thus, it is suggested that Pseudomonas aeruginosa may effectively be inhibited by various aminoglycoside and cephalosporin combinations.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.396-399
• /
• 1996

High-performance liquid chromatographic method with UV detecction was developed for the determination of theophylline and its metabolites in human urine using ${beta}$-hydroxyethyl theophylline$({beta} -HET)$ as an internal standard. For extraction of urine sample, quality control sample and xanthine-free blank urine were mixed with decylamine (ion-paring reagent) and ${beta}$-HET. After saturation with ammonium sulfate, the mixture was then extracted with organic solvent at pH values of 4.0-4.5. All separations were performed with ion-pair chromatography using decylamine as an ion-pairing reagent and 3mM sodium acetate buffered mobile phase (pH 4.0) containing 1% (v/v) acetonitrile and 0.75 mM decylamine. The detection limits of theophylline, 1, 3-DMU, 1-MU, 3-MX and 1-MX in human urine were 0.17, 0.17, 0.39, 0.19 and 0.19 ${\mu}g$/ml, based on a signal-to-noise ratios of 3.0. The mean intraday coefficients of variation (C.V.s) of each compound on nine replicates were lower than 2.0%, while mean interday C.V.s on three days were lower than 1.6%. All separations were finished within 40miutes.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.51-58
• /
• 2004

This paper describes the development of a small 6-axis force/moment sensor for robot's finger, which measures farces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously. In order to safely grasp an unknown object using the robot's gripper, and accurately perceive the position of it in the gripper, it should measure the force in the gripping direction, the force in the gravity direction and the moments each direction, and perform the force control using the measured forces and moments. Also, it should detect the moments Mx (x-direction moment), My and Mz to accurately perceive the position of the object in the grippers. Thus, the robot's gripper should be composed of 6-axis force/moment sensor that can measure forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously. In this paper, the small 6-axis force/moment sensor for measuring forces Fx, Fy, Fz, and moments Mx, My, Mz simultaneously was newly modeled using several parallel-plate beams, designed, and fabricated. The characteristic test for the developed sensor was performed, and the result shows that intereference errors of the developed sensor are less than 4.23％. Thus, the developed small 6-axis force/moment sensor may be used a robot's gripper.

• Nuclear Engineering and Technology
• /
• v.53 no.5
• /
• pp.1511-1518
• /
• 2021

In most countries, the thermal criteria for the engineered barrier system (EBS) is set to below 100 ℃ due to the possible illitization in the buffer, which will likely be detrimental to the performance and safety of the repository. On the other hand, if the thermal criteria for the EBS increases, the disposal density and the cost-effectiveness for the high-level radioactive wastes will dramatically increase. Thus, fundamentals on the thermal behavior of the buffer under the elevated temperatures is of crucial importance. Yet, the behaviors at the elevated temperatures of the bentonite under groundwater-saturated conditions have not been reported to-date. Here, we have developed an in-situ synchrotron-based method for the thermal behavior study of the buffer under the elevated temperatures (25-250 ℃), investigated dspacings of the montmorillonite in the Korean bentonite (i.e., Ca-type) at dry and KURT (KAERI Underground Research Tunnel) groundwater-saturated conditions (KJ-ii-dry and KJ-ii-wet), and compared the behaviors with that of MX-80 (i.e., Na-type, MX-80-wet). The hydration states analyzed show tri-, bi-, and mono-hydrated at 25, 120, and 250 ℃, respectively for KJ-ii-wet, whereas tri-, mono-, and de-hydrated at 25, 150, and 250 ℃, respectively for MX-80-wet. The Korean bentonite starts losing the interlayered water at lower temperatures; however, holds them better at higher temperatures as compared with MX-80.

• Nuclear Engineering and Technology
• /
• v.54 no.5
• /
• pp.1616-1622
• /
• 2022

Selenium has been identified as an element of interest for the safety assessment of a deep geological repository (DGR) for used nuclear fuel. In Canada, groundwaters at DGR depths in sedimentary rocks have been observed to have a high ionic strength. This paper examines the sorption behavior of Se(-II) onto illite, MX-80 bentonite, Queenston shale, and argillaceous limestone in Na-Ca-Cl solutions of varying ionic strength (0.1-6 mol/kgw (m)) and across a pH range of 4-9. Little ionic strength dependence for Se(-II) sorption onto all solids was observed except that sorption at high ionic strength (6 m) was generally slightly lower than sorption at low ionic strength (0.1 m). Illite and MX-80 exhibited the expected results for anion sorption, while shale and limestone exhibited more constant sorption across the pH range tested. A non-electrostatic surface complexation model successfully predicted sorption of Se(-II) onto illite and MX-80 using the formation of an inner-sphere surface complex and an outer-sphere surface complex. Optimized values for the formation reactions of these surface species were proposed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.20 no.2
• /
• pp.151-160
• /
• 2022

The sorption of Eu on MX-80 bentonite in Na-Ca-Cl solutions is investigated at a molal proton concentration (pH_m) range of 3 to 10 and an ionic strength (I) range of 0.1 to 6 m (mol·kgw^-1). The sorption equilibrium of Eu on MX-80 is achieved within 14 to 21 d at I = 0.1 and 6 m. The sorption distribution coefficient (K_d) values of Eu for MX-80 increase as pH_m increases from 3 to 6 for all I values, and they are independent of pH_m between 8 and 10 at I ≥ 0.5 m. Meanwhile, at I = 0.1 m, the K_d value at pH_m = 10 is slightly lower than those at pH_m = 8 and 9. The K_d values are not affected by the I values between 0.5 m and 6 m, whereas the K_d value at I = 0.1 m is greater than those at I ≥ 0.5 m, except at pH_m = 10. A two-site protolysis nonelectrostatic surface complexation and cation exchange sorption model is applied to the Eu sorption data for I ≤ 4 m, and the equilibrium constants of the sorption reactions are estimated.

• The korean journal of orthodontics
• /
• v.31 no.2 s.85
• /
• pp.159-172
• /
• 2001

Three dimensional analysis of malocclusion and craniofacial deformation is essential for the successful orthodontic treatment. But the orthodontists are not familiar with diagnosis and treatment plane based on lateral cephalometric analysis. Since orthodontists do not posses a sufficient knowledge in standard value of posteroanterior cephalometric anaysis and of clinical importance for transverse jaw growth. In this study male(n=130) and female(n=171) aged from 6 to 16 and diagnosed as Class I malocclusion were selected to analysis width of cranium, maxilla and mandible on the posteroanterior cephalogram. The changes as a function of chronologic age and cervical vertebrae maturity index(CVXI) were examined. The Proper regression model was selected by sex with polynominal regression models and method of variable selection. Mean of each measurements and 70% confidence interval of individual measurement according to age was assesed and a graphs were made. Results are as follows :1. All the measurements for the width are gradually incresed as increase in chronologic age and CVMI. From the total amount of change between age 6 and 16, there is a tendency that mandibular width is broader than maxillary width and the width of male is broader than female. 2. There is no statistically significant sexual difference in Mx-Mn difference, Mx-Mn width differential, Mx/Mn ratio according to age and CVMI. 3. Mean of each measurement and 70% confidence interval of individual measurement according to age and sex were assessed and graphs were made for maxillary width, mandibular width, Mx-Mn difference, Mx/Mn ratio. 4. The width of maxilla and mandible in Korean children are broader than Western children during growth period.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.16 no.1
• /
• pp.8-11
• /
• 2012

Purpose : Among quality control items, the radiochemical impurity must be below 10% of total radioactivity. In this regard, as the recently commercialized automatic synthesis module produces a large amount of 18F-FDG, radiolysis of radiopharmaceuticals is very likely to occur. Thus, this study compared the changes in radiochemical purity regarding radiolysis of $^{18}F$-FDG according to automatic synthesis module. Materials and methods : Cyclotron (PETtrace, GE Healthcare) was used to produce $^{18}F$ and automatic synthesis module (FASTlab, Tracerlab MX, GE Healthcare) was used to achieve synthesis into FDG. For radiochemical purity, Radio-TLC Scanner (AR 2000, Bioscan), GC (Gas Chromatograph, Agilent 7890A) was used to measure the content of ethanol included in $^{18}F$-FDG. Glass board applied with silica gel ($1{\times}10cm$) was used for stationary phase while a mixed liquid formed of acetonitrile and water (ratio 19:1) was used for mobile phase. High-concentration and low-concentration $^{18}F$-FDG were produced in each synthesis module and the radiochemical purity was measured every 2 hours. Results : The purity in low-concentration (below 2.59 GBq/mL) was measured as 99.26%, 98.69%, 98.25%, 98.09% in Tracerlab MX and as 99.09%, 97.83%, 96.89%, 96.62% in FASTlab according to 0, 2, 4, 6 hours changes, respectively. The purity in high-concentration (above 3.7 GBq/mL) was measured as 99.54%, 96.08%, 93.77%, 92.54% in Tracerlab MX and as 99.53%, 95.65%, 92.39%, 89.82% in FASTlab according to 0, 2, 4, 6 hours changes, respectively. Also, ethanol was not detected in GC of $^{18}F$-FDG produced in FASTlab, while 100~300 ppm ethanol was detected in Tracerlab MX. Conclusion : Whereas the change of radiochemical purity was only 3% in low-concentration $^{18}F$-FDG, the change was rapidly increased to 10% in high-concentration. Also, higher radiolysis were observed in $^{18}F$-FDG produced in FASTlab than Tracerlab MX. This is because ethanol is included in the synthesis stage of Tracerlab MX but not in the synthesis stage of FASTlab. Thus, radiolysis is influenced by radioactivity concentration than the inclusion of ethanol, which is the radioprotector. Therefore, after producing high-concentration $^{18}F$-FDG, the content must be diluted through saline to lower concentration.

• Molecular & Cellular Toxicology
• /
• v.1 no.1
• /
• pp.46-51
• /
• 2005

Mutagen X (MX) exists in our drinking water as the bi-products of chlorine disinfection. Being one of the most potent mutagen, it attracted much attention from many researchers. MX and its analogs are tested and modeled by quantitative structure activity relationship (QSAR) methods. As a result, factors affecting this class of compounds have been found to be steric and electrostatic effects. We tried to collect all the data available from the literature. The quantitative structure-activity relationship of a set of 29 MX was analyzed using Molecular Field Analysis (MFA) and Receptor Surface Analysis (RSA). The best models gave $q^{2}=0.918,\;r^{2}=0.949$ for MFA and $q^{2}=0.893,\;r^{2}=0.954$ for RSA. The models indicate that an electronegative group at C6 position of the furanone ring increases mutagenicity.

• Bulletin of the Korean Mathematical Society
• /
• v.45 no.4
• /
• pp.739-748
• /
• 2008

In this paper, we obtain the general solution of a generalized cubic functional equation, the Hyers-Ulam-Rassias stability, and the stability by using the alternative fixed point for a generalized cubic functional equation $$4f(\sum_{j=1}^{n-1}\;x_j\;+\;mx_n)\;+\;4f(\sum_{j=1}^{n-1}\;x_j+mx_n\;x_j\;-\;mx_n}\;+\;m^2\sum_{j=1}^{n-1}\;(f(2x_j)\;=\;8f(\sum_{j=1}^{n-1}\;x_j)\;+\;4m^2{\sum_{j=1}^{n-1}}\;\(f(x_j+x_n)\;+\;f(x_j-x_n)\)$$ for a positive integer $m\;{\geq}\;1$.