• Restorative Dentistry and Endodontics
• /
• 제26권5호
• /
• pp.393-398
• /
• 2001

Polymerization of light-activated restorations results in temperature increase caused by both the exothermic reaction process and the energy absorbed during irradiation. Within composite resin, temperature increases up to 2$0^{\circ}C$ or more during polymerization. But, insulation of hard tissue of tooth lowers this temperature increase in pulp. However, many clinicians are concerned about intrapulpal temperature injury. The purpose of this study was to evaluate temperature changes in the pulp according to various restorative materials and bases during curing procedure. Caries and restoration-free mandibular molars extracted within three months were prepared Class I cavity of 3$\times$6mm with high speed handpiece fissure bur. 1mm depth of dentin was evaluated with micrometer in mesial and distal pulp horns. Pulp chambers were filled with 37.0$\pm$0.1$^{\circ}C$ water to CEJ. Chromium-alumina thermocouple was placed in pulp horn below restorative materials for evaluating of temperature changes. This thermocouple was connected to temperature-recording device(Multiplication analyzer MX, 6.000, JAPAN). Temperature changes was evaluated from initial 37.$0^{\circ}C$ after temperature changes to 37.$0^{\circ}C$. Tip of curing unit was placed in the center of prepared cavity separated 1mm from restorative materials. Curing time was 40s. The restorative materials were used with Z 100, Fuji II LC, Compoglass flow and bases were used with Vitrebond, Dycal. Resrorative materials were placed in 2mm. The depth of bases were formed in 1mm and in this upper portion, resin of 2mm depth was placed. This procedure was performed 10 times. The results were as follows. 1. All the groups showed that the temperature in pulp increased as curing time increased 2. The temperature increase of glass ionomer was significantly higher than that of Resin and Compomer during curing procedure (P<0.05). 3. The temperature increase in glass ionomer base was significantly higher than that of Calcium hydroxide base during Resin curing procedure (P<0.05).

• Journal of Welding and Joining
• /
• 제34권6호
• /
• pp.47-54
• /
• 2016

Post-Weld Heat Treatment (PWHT) cracking susceptibility in the weld heat-affected zone (HAZ) of reduced activation ferritic-martensitic (RAFM) steels was evaluated through stress-rupture tests. 9Cr-1W based alloys including different C, Ta and Ti content were prepared. The coarse grained heat-affected zone (CGHAZ) samples were simulated with welding condition of 30 kJ/cm heat input. CGHAZ samples consisted of martensite matrix. Stress rupture experiments were carried out using a Gleeble simulator at temperatures of $650-750^{\circ}C$ and at stress levels of 125-550 MPa, corresponding to PWHT condition. The results revealed that PWHT cracking resistance was improved by Ti addition, i.e., Ti contributed to the formation of fine and stable MX precipitates and suppression of coarse M23C6 carbides, resulting in improvement of stress rupture ductility. Meanwhile, rupture strength increased with increasing solute C content.

• 대한소아치과학회지
• /
• 제27권4호
• /
• pp.494-498
• /
• 2000

진정요법하의 치과진료에서 환자의 상태를 지속적으로 감시하는 것은 매우 중요하다. 여러 방법 중 가장 널리 사용되는 것 중 Pulse Oximeter가 있다. Pulse Oximeter는 비침습적 방법으로 계속해서 동맥혈액의 산소포화도를 측정할 수 있도록 고안된 장치로서 기기에 나타나는 산소포화도$(SpO_2)$는 실제로 측정한 동맥혈액의 산소포화도$(SaO_2)$와 거의 일치하는 것으로 알려져 있다. 본 진료실에 있는 세종류의 Pulse Oximeter를 이용하여 한 환자에게 동시에 두 개의 기기를 적용하였을 경우, 산출값을 상호 비교한 결과, 짧은(3회) 맥박수를 평균하는 기기가 낮은값이 나왔으며, 다른 두개의 Pulse Oximeter와 유의한 차이가 있는 것으로 밝혀졌다. 짧은 맥박수를 평균하는 기기는 반응이 빠르나, 산소포화도의 값이 작게 산출되고, 외부의 신호에 더욱 민감하여, 오류가 존재할 가능성 또한 높다. 기기의 특성을 알아, 술자는 적절한 기기를 선택하는 것이 중요하다.

• 대한소아치과학회지
• /
• 제25권3호
• /
• pp.555-561
• /
• 1998

1. Hypophosphatasia는 골조직 및 치아조직의 비정상적인 석회화를 나타내는 대사장애로, 특징적 구강내 소견 인 유치의 조기탈락 양상으로 치과에서 조기진단이 가능하다. 2. 본 증례에서 상악궁 확장을 동반한 의치 제작으로 심미적, 기능적으로 양호한 결과를 얻었으며, 영구치열기 까지 장기적 관찰 및 치료가 필요할 것으로 사료된다.

• Archives of Pharmacal Research
• /
• 제29권5호
• /
• pp.405-411
• /
• 2006

Biphenyl dimethyl dicarboxylate (DDB) is a hepatoprotectant, which is used as an adjuvant agent in a treatment for chronic hepatitis. Amantadine is an antiviral agent, which is utilized primarily in the treatment of influenza, but also, occasionally in the treatment of hepatitis C. In a previous study, we reported that DDB, coupled with amantadine, would exert an anti-HBV effect, via the induction of interferon-inducible gene expression in the HepG2 2.2.15 cell line. The primary objective of the present study was to determine whether or not DDB and/or amantadine exhibit anti-HBV properties, and what mechanisms of action might be involved in such properties. In our study, we were able to determine that DDB stimulates Jak/Stat signaling, and induces the expression of interferon alpha $(IFN-\alpha)$ stimulated genes, most notably 6-16 and ISG12. In addition, the antiviral effectors induced by $IFN-\alpha$, PKR, OAS, and MxA, were regulated in the presence of DDB at its optimal concentration $(250{\mu}g/mL)$, to a degree commensurate with the degree of induction associated with the $IFN-\alpha$ treated group. Finally, we determined that the replication of pregenomic RNA and HBeAg was inhibited by DDB treatment, and this inhibition was maximized when coupled with the administration of amantadine $(25{\mu}g/mL)$. In conclusion, the results of this study demonstrated clearly that DDB, as well as the combination of DDB/amantadine, directly inhibited $IFN-\alpha$ signaling-mediated replication of HBV in infected hepatocytes, and thus may represent a novel treatment for chronic hepatitis B, which would be characterized principally by its improved safety over other treatment strategies.

• Journal of Periodontal and Implant Science
• /
• 제27권3호
• /
• pp.585-595
• /
• 1997

Removal of subgingival calculus is essential for the success in periodontal treatment. Subgingival instrumentation is used for the removal of all bacterial plaque and calculus. In this study, two types of anterior curet were used on ant. teeth to conduct subgingival scaling and root planing. The remaining amount of calculus was evaluated according to type of instrument, depth of pocket, and tooth surface. 24 teeth extracted from patients being treated at Dan Kook University dept. Perio. were used. 4 surfaces per tooth a total of 96 areas were evaluated. 12 teeth treated with Gracey No. 1-2 was used as the control group and 12 teeth treated with Mini-five curet No. 1-2 was the experimental group. The 4 surfaces of the teeth {buccal, mesial, lingual or palatal, distal) were observed under a stereomicroscope and the images were captured 3 times per surfaced with a CCD. The image were observed on the monitor using a $10{\times]10$ grid produced with the Microsoft power point. The amount of calculus remaining was evaluated 3 times per surface. The results were as follows. 1. There was no significant difference in remaining calculus according to the pre-treatment pocket depth, and tooth position{Mx. or Mn). 2. The Mini-five curet showed better results than the Gracey curet but there was no statistically significant difference. 3. In both Gracey curet group and Mini-five curet group the lingual(or palatal) surface showed significant difference compared to the other surfaces(p<0.05). From the results above, it is thought that when treating ant. teeth consideration of the tooth surface is more important than the choice of instrument.

• 한국운동역학회지
• /
• 제28권1호
• /
• pp.1-8
• /
• 2018

Objective: The purpose of this study is to investigate the differences in biomechanical variables of golf driving motion according to gender. Method: A total of 21 healthy golfers (11 men and 10 women) who have more than 5 years of professional experience and have been registered in the Korea Golf Association was recruited. A 250-Hz 8-camera motion capture system (MX-T20, Vicon, LA, USA) was used to capture the motion trajectories of a total of 42 reflective markers attached to the golfer's body and club. Moreover, two 1,000-Hz AMTI force plates (AMTI OR6-7-400, AMTI, MA, USA) were used to measure the ground reaction force. The mean and standard deviation for each parameter were then calculated for both groups of 21 subjects. SPSS Windows version 23.0 was used for statistical analysis. The independent t-test was used to determine the differences between groups. An alpha level of .05 was utilized in all tests. Results: There were differences in joint angles according to gender during golf driver swing. Men showed a statistically significantly higher peak joint angle and maximum range of angle in sagittal and frontal axis of the pelvis, hip, and knee. Moreover, women's swing of the pelvis and hips was found to have a pattern using the peak joint angle and range of angle in the vertical axis of the pelvis and hip. There were the differences in peak joint moment according to gender during golf driver swing. Men used higher joint moment in the downswing phase than women in the extensor, abductor, and external rotator muscles of the right hip; flexor and adductor muscles of left hip joint; and flexor and extensor muscles of the right knee. Conclusion: This result reveals that male golfers conducted driver swing using stronger force of the lower body and ground reaction force based on strength of hip and thigh than female golfers.

• Nuclear Engineering and Technology
• /
• 제48권2호
• /
• pp.518-524
• /
• 2016

The thermal aging effects on mechanical properties and microstructures in China low-activation martensitic steel have been tested by aging at $550^{\circ}C$ for 2,000 hours, 4,000 hours, and 10,000 hours. The microstructure was analyzed by scanning and transmission electron microscopy. The results showed that the grain size and martensitic lath increased by about $4{\mu}m$ and $0.3{\mu}m$, respectively, after thermal exposure at $550^{\circ}C$ for 10,000 hours. MX type particles such as TaC precipitated on the matrix and Laves-phase was found on the martensitic lath boundary and grain boundary on aged specimens. The mechanical properties were investigated with tensile and Charpy impact tests. Tensile properties were not seriously affected by aging. Neither yield strength nor ultimate tensile strength changed significantly. However, the ductile-brittle transition temperature of China low-activation martensitic steel increased by $46^{\circ}C$ after aging for 10,000 hours due to precipitation and grain coarsening.

• Journal of Microbiology
• /
• 제38권4호
• /
• pp.203-208
• /
• 2000

Cytomegalovirus (CMV), a beta-herpesvirus with worldwide distribution, exhibits host persistence, a distinguishing characteristic of all herpesviruses. This persistence is dependent upon restricted gene expression in infected cells as well as the ability of productively infected cells to escape from normal cell-mediated anti-viral immunosurveillance. Type I (IFN-$\alpha$/$\beta$) and type II (IFN-γ) interferons are major components of the innate defense system against viral infection. They are potent inducers of MHC class I and II antigens and of antigen processing proteins. Additionally, IFNS mediate direct antiviral effects through induction effector molecules that block viral infection and replications such as 2', 5-oligoadenylate synthetase (2, 5-OAS). IFNS function through activation of well-defined signal transduction pathways that involve phosphorylation of constituent proteins and ultimate formation of active transcription factors. Recent studies have shown that a number of diverse viruses, including CMV, EBV, HPV mumps and Ebola, are capable of inhibiting IFN-mediated signal transduction through a variety of mechanisms. As an example, CMV infection inhibits the ability of infected cells Is transcribe HLA class I and II antigens as well as the antiviral effector molecules 2, 5-OAS and MxA I. EMSA studies have shown that IFN-$\alpha$ and IFN-γ are unable to induce complete signal transduction in the presence of CMV infection, phenomena that are associated with specific decreases in JAKl and p48. Viral inhibition of IFN signal transduction represents a new mechanistic paradigm for increased viral survival, a paradigm predicting widespread consequences in the case of signal transduction factors common to multiple cytokine pathways.

• 대한한방부인과학회지
• /
• 제25권4호
• /
• pp.46-55
• /
• 2012

Objectives: It is well known that genetic factors and environmental factors play major role in aging skin. In general, son and daughter take after their parents in appearance. But comparability of skin properties in Korean family has not been well estimated. So we evaluated the correlation of skin properties in Korean mother-daughter pairs. Methods: 10 couples of mother and daughter pair(n=20) participate in this study. Mothers and daughters were aged $50.6{\pm}2.459$ and $23.8{\pm}2.15$ years, respectively. Skin moisture, sebum, skin color and elasticity is measured using non-invasive method : Corneometer CM825, Sebumeter(MPA580), Mexameter MX18, Cutometer MPA580. Statistical analysis program we used is Minitab 14 Korea. Results: The Skin moisture of mother group was significantly higher than daughter group. And skin elasticity(R2) of the daughter group was significantly higher than mother group. In the results of correlation analysis between mother and daughter pairs, skin elasticity(R2) had high positive correlation(r=0.729, p=0.026). But skin moisture, sebum, melanin index, erythema index and skin elasticity(R5) did not be confirmed a significant correlation. Conclusions: Skin elasticity(R2) is the only factor that showed high positive correlation significantly in mother and daughter pairs. Mother and daughter share the genetic factors and environmental factors that influence skin aging. So, mother's aging pattern will be a good guide for anti-aging of daughters.