• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.259-264
• /
• 2019

Cost effective clay adsorptive microfiltration membranes were synthesized to remove Cr (III) from high polluted water. Raw and calcined bentonite were mixed in order to decrease the shrinkage and also increase the porosity; then, 20 wt% of carbonate was added and the samples, named B (without carbonate) and B-Ca20 (with 20 wt% calcium carbonate) were uniaxially pressed and after sufficient drying, fired at $1100^{\circ}C$ for 3 hours. Then, physical and mechanical properties of the samples, their phase analyses and microstructure and also their ability for Cr(III) removal from high polluted water (including 1000 ppm Cr (III) ions) were studied. Results showed that the addition of calcium carbonate lead the porosity to increase to 33.5% while contrary to organic pore formers like starch, due to the formation of wollastonite, the mechanical strength not only didn't collapse but also improved to 36.77 MPa. Besides, sample B-Ca20, due to the presence of wollastonite and anorthite, could remove 99.97% of Cr (III) ions. Hence, a very economic and cost effective combination of membrane filtration and adsorption technology was achieved for water treatment which made microfiltration membranes act even better than nanofiltration ones without using any adsorptive nano particles.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.265-275
• /
• 2019

This study aimed to develop a compact partial nitritation step by forming granules with high Ammonia-Oxidizing Bacteria (AOB) fraction using the Air-lift Granulation Reactor (AGR) and to evaluate the feasibility of treating reject water with high ammonium content by combination with the Anammox process. The partial nitritation using AGR was achieved at high nitrogen loading rate ($2.25{\pm}0.05kg\;N\;m-3\;d^{-1}$). The important factors for successful partial nitritation at high nitrogen loading rate were relatively high pH (7.5~8), resulting in high free ammonia concentration ($1{\sim}10mg\;FA\;L^{-1}$) and highly enriched AOB granules accounting for 25% of the total bacteria population in the reactor. After the establishment of stable partial nitritation, an effluent $NO_2{^-}-N/NH_4{^+}-N$ ratio of $1.2{\pm}0.05$ was achieved, which was then fed into the Anammox reactor. A high nitrogen removal rate of $2.0k\; N\;m^{-3}\;d^{-1}$ was successfully achieved in the Anammox reactor. By controlling the nitrogen loading rate at the partial nitritation using AGR, the influent concentration ratio ($NO_2{^-}-N/NH_4{^+}-N=1.2{\pm}0.05$) required for the Anammox was controlled, thereby minimizing the inhibition effect of residual nitrite.

• Membrane and Water Treatment
• /
• v.10 no.5
• /
• pp.331-338
• /
• 2019

This study aimed to investigate the membrane fouling and sludge characteristics in a pilot-scale submerged membrane bioreactor (MBR) operated under low temperature ($7^{\circ}C$). To elucidate the mechanisms of membrane fouling at low temperature, we studied the correlation between MBR performances and physicochemical properties of sludge including extracellular polymeric substance (EPS), relative hydrophobicity (RH) and floc size during long-term operation. The MBR was shown able to remove chemical oxygen demand (COD) stably and efficiently (>90 %) in the case of overgrowth of filamentous bacteria (bulking sludge) at low temperature. On the other hand, the occurrence of filamentous bulking greatly accelerated membrane fouling, as indicated by membrane filtration period of 14 days for filamentous bulking at $7^{\circ}C$, in comparison with that of 27 days for non-bulking sludge at $24^{\circ}C$ The overgrowth of filamentous bacteria resulting from low-temperature condition led to an increased release of EPS, higher RH, smaller floc size and lower fractal dimension of sludge. These factors accelerated the formation of compact cake layer on membrane surface in association with performance diminution in terms of increase in transmembrane pressure (TMP) of the membrane and thus the decrease in membrane permeability.

• The Journal of Korean Physical Therapy
• /
• v.31 no.4
• /
• pp.169-175
• /
• 2019

Purpose: This study examined the effects of a spiral elastic band for the walking function on patients with chronic stroke. Methods: Twenty one chronic stroke patients were recruited and divided randomly into the experimental group and control group. Both groups performed mat exercises and gait training three times a week for four weeks, and gait training was applied to the experimental group with additional spinal elastic bands. Results: The results of this research were as follows. The 10MWT measurements showed that the velocities within and between the groups decreased significantly, and the results of TUG showed significant decreases in velocities after the interventions in both the control group and experimental group. On the other hand, there were no significant differences between the control and experimental group. The FRT measurements showed significantly increased stride lengths within and between the groups. The measurements of the stride length, stride velocity, cadence, and step length showed significant improvement within the groups, but there was no significant difference between the groups. The measurement of stance showed that the non-paralytic patients had a significant increase in the rates within the groups and a significant difference was observed between the groups. Conclusion: Spiral elastic bands are an effective intervention method for rehabilitation programs to enhance the walking function in the clinical field. A treatment needs to be developed for patients with walking problems due to various disorders by investigating the action mechanism of spiral elastic bands.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.105-112
• /
• 2019

On the purpose of conform the more stringent government regulation for turbid stormwater from construction sites, the feasibility and availability of synthetic fiber placing after the conventional protection barrier were tested in this study. Initially, comparative work on the filtering performance of fiber media and conventional gravel filter was carried out, 27% higher filtration capacity was obtained under the similar operational conditions. The filter efficiency was about 20 to 52% with a varying filter depth of 5 to 15cm, presuming at extreme storm flow conditions (800-1500 m/day of filtration rates). Fiber filter was found to have a similar filtration prosperity as grain media; namely, the separation efficiency is directly and inversely proportional to filter depth and rate, respectively. The effects of filter aid (polyaluminium chloride) on filter performance was also investigated, it greatly affected the turbidity reduction at the dosage of 2 mg/L. At the time of breakthrough, a simple filter washing was carried out, herein, the solid recovery achieved over than 88% and greatly determined by operational parameters. Based on the operational data, the empirical models aimed for predicting filtration efficiency were established, which can effectively determine the required filter depth and filtration area in field.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.121-125
• /
• 2019

Chronic exposure to atrazine (ATR) raises concerns about adverse effects on reproductive functions. We tested our previously validated filtering device, the OBP-based filter, onto a biological model constituted of cultured swine granulosa cells treated for 48 h with media conditioned with 0.1 or $10{\mu}M$ ATR evaluating cell viability and steroidogenesis. The tested atrazine concentrations did not change granulosa cell viability and no filtering effects was observed following treatments with media prepared with differently filtered water. As for steroidogenesis, treatment of water with OBP-based filter containing $10{\mu}M$ atrazine completely suppressed the stimulatory effect of $10{\mu}M$ atrazine on progesterone production as well as the inhibitory effect of $0.1{\mu}M$ ATR on estradiol-$17{\beta}$ production by granulosa cells. Our data demonstrate that the impairment of steroidogenesis induced by ATR is effectively removed after water filtration in the experimental device thus suggesting potential use in biotechnological applications on living cells and/or organisms.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.127-137
• /
• 2019

The D2EHPA/TBP co-extractants immobilized PolyHIPE membrane can be used for the selective separation of Mn (II) from Co (II). By solvent-nonsolvent method, D2EHPA/TBP co-extractants can be effectively immobilized into PolyHIPE membrane. The pore structure of PolyHIPE membrane and the presence of TBP enhance the stability of immobilized co-extractants. The optimal operating conditions for the separation of Mn (II) and Co (II) are feeding phase at pH 5.5, sulfuric acid concentration in the stripping phase of about 50 g/L and stirring speed at 400 rpm. The D2EHPA/TBP co-extractants ratio of 5:1 shows synergetic effect on Mn/Co separation factor about 22.74. The removal rate and recovery rate of Mn (II) is about 98.4 and 97.1%, respectively, while for Co (II) the transport efficiency is insignificant. The kinetic study of Mn (II) transport shows that high initial flux, $J_f^o=80.1({\mu}mol/m^2s)$, and maxima stripping flux, $J_s^{max}=20.8({\mu}mol/m^2s)$, can be achieved with D2EHPA/TBP co-extractants immobilized PolyHIPE membrane. The stability and reusability study shows that the membrane can maintain a long term performance with high efficiency. High purity of Co (II) and Mn (II) can be recovered from the feeding phase and stripping phase, respectively.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.139-148
• /
• 2019

In this study, the removal of MB from saline solutions was evaluated by two methods by adsorption and electrodialysis; the adsorption of the mixture dye/salt on dried orange peel waste (OPW) was studied in batch method. In this study the biosorption of cationic dye by OPW was investigated as a function of initial solution pH, and initial salt (sodium chloride) concentration. The maximal dye uptake at $pH{\geq}3.6$ in the absence and in the presence of salt and the dye uptake diminished considerably in the presence of increasing concentrations of salt up to 8 g/L. The Redlich Peterson and Langmuir were the most suitable adsorption models for describing the biosorption equilibrium data of the dye both individually and in salt containing medium. As well, this work deals with the electrodialysis application to remove the dye. Synthetic solutions were used for the investigation of the main operational factors affecting the treatment performance; such as applied voltage, pH, initial dye concentration and ionic strength. The experimental results for adsorption and electrodialysis confirmed the importance of electrostatic interactions on the dye. The electrodialysis process with standard ion exchange membranes enabled efficient desalination of cationic dye solutions; there are two main factors in fouling: electrostatic interaction between cations of dyes and the fixed charged groups of the CEM, and affinity interactions.

• Membrane and Water Treatment
• /
• v.10 no.2
• /
• pp.155-163
• /
• 2019

The roles of polypropylene (PP) beads and pH on membrane fouling and treatment efficiency were investigated in a hybrid advanced water treatment process of tubular carbon fiber membranes (ultrafiltration (UF) or microfiltration (MF)) and PP beads. The synthetic feed including humic acid and kaolin flowed inside the membrane, and the permeated contacted the PP beads fluidized in the space between the membrane and the module with UV irradiation and periodic water back-flushing. In the hybrid process of UF ($0.05{\mu}m$) and PP beads, final resistance of membrane fouling ($R_f$) after 180 min increased as PP beads increased. The turbidity treatment efficiency was the maximum at 30 g/L; however, that of dissolved organic matters (DOM) showed the highest at PP beads 50 g/L. The $R_f$ strengthened as pH of feed increased. It means that the membrane fouling could be inhibited at low alkali condition. The treatment efficiency of turbidity was almost constant independent of pH; however, that of DOM showed the maximum at pH 5. For MF ($0.1{\mu}m$), the final $R_f$ was the minimum at PP beads 40 g/L. The treatment efficiencies of turbidity and DOM were the maximum at PP beads 10 g/L.

• Journal of the Korean Society of Physical Medicine
• /
• v.14 no.1
• /
• pp.7-14
• /
• 2019

PURPOSE: This study examined the effects of observing a self-video or a video of another person performing balance and gait training, followed by actual performance of the observed movements on the balance and walking ability of chronic stroke patients. METHODS: Thirty patients, who had experienced a stroke and were admitted to S rehabilitation hospital for treatment, were selected randomly and divided into three groups with 10 patients each: self-action observation (SAO) group, other-action observation (OAO) group, and treadmill walking training (TWT) group. The training program was conducted five times per week for four weeks. The GAITRite system, 10 m walking test, and timed up and go test were performed to measure the subjects' gait and balance ability. RESULTS: The velocity, cadence, double support, and stride length were increased significantly in the SAO and OAO groups (p<.05) but the T group showed no significant changes; no significant difference was observed among the groups (p >.05). The 10MWT decreased significantly in the OAO group (p<.05), but there were no significant changes in the SAO and T groups, and no significant difference was observed among the groups (p>.05). The TUG decreased significantly in the SAO and OAO groups (p<.05), but there were no significant changes in the T group, and no significant difference was observed among the groups (p>.05). CONCLUSION: The self or other action observation training helps improve the balance and gait ability.